Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Dr Ronald Stiffler SEC technology  (Read 278779 times)

profitis

  • Hero Member
  • *****
  • Posts: 3952
Re: Dr Ronald Stiffler SEC technology
« Reply #30 on: October 31, 2017, 04:44:46 PM »
" I just got so frustrated with it, but I
will figure it out."

Try to focus on more detour andc less detail silly

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #31 on: November 02, 2017, 01:21:12 PM »

antimony,

no problem, i think the best way to measure is to use the scope in normal (not FFT) mode and tune for max. signal.
I used a kacher/tesla secondary coil for the measurments in the below video.
I know it resonates around 1Mhz when in a kacher / tesla coil like setup.

In the video i use severall methods to measure the spatial or self resonance of this coil, the normal scope way, the FFT way and the spectrum analyzer way.

Hope it makes some sense now.

video here: https://www.youtube.com/watch?v=j1H0XktYNjQ

Regards Itsu

I think i have seen it, and it was very informative, but as i am a slow learner i haven´t got it 100% yet. :)

Thanks for taking your time Itsu.

Edit. Cool, i havent seen this one yet, so thanks mate. :) I am going to take a peek at it right away.

I didn´t get that it was for me until you said it in the beginning, so thank you very much for taking you time to do the video.

I am going to try the same thing as you did, with the information that you provided in the video.

But i think that it may be my cheap signal generator that keeps me from achieving success, but i will keep trying.
As you may already know, i am new to this, but this signal gen is the one i got if you want to take a look at it.
https://www.youtube.com/watch?v=9o5MzTOzZo4

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Dr Ronald Stiffler SEC technology
« Reply #32 on: November 02, 2017, 02:26:50 PM »

Looks like a fairly decent function generator to me and i am sure you can do the same test as i did using your coil assumming the spatial or self resonance of your coil is not higher
then the 24Mhz your FG can supply.

I do advice to use an isolation transformer as suggested in the Test Video of that device as it seems poorly isolated from mains (50 or 60Hz), see 12min. into the video.
Not for this test, but when using it on more delicate circuits it could possible damage something.


Itsu

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #33 on: November 09, 2017, 11:55:00 AM »
Looks like a fairly decent function generator to me and i am sure you can do the same test as i did using your coil assumming the spatial or self resonance of your coil is not higher
then the 24Mhz your FG can supply.

I do advice to use an isolation transformer as suggested in the Test Video of that device as it seems poorly isolated from mains (50 or 60Hz), see 12min. into the video.
Not for this test, but when using it on more delicate circuits it could possible damage something.


Itsu

Oh, that´s good to hear about the signal generator. I am going to look at your videos again, and study them as i haven´t had that much free time these last 5 days or so, but you should know that i really appreciate your help.

I am going to have some time from tomorrow morning, and this weekend, so i am going to start up again with the project.
Mine are not 24 Mhz (just 2 Mhz), and dont have all those waveforms though. Other then that they are the same, i think.
Here is the one i have. That i am sure of 100% :)
https://www.ebay.co.uk/itm/2MHz-Dual-Channel-DDS-Function-Signal-Generator-Sine-Square-Wave-Sweep-Counter-/281466585560

Sorry to "trick" you, but this is the one i really have. I was in a bit of a rush when i posted the link to the first one.
https://www.youtube.com/watch?v=EZ-i6lOTT9k

I am going to watch the video, to see what you are referring to. :)

Thanks again Itsu.

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #34 on: November 13, 2017, 06:22:11 PM »
I connected an earth ground to the negative of a SEC and it lit up 9 white LEDs dimly, and i just had to ask you guys if this is something unusual, or whatever?

Maybe this is totally normal, but I was just blown away as this is totally new to me.

Here is a link to a short video.

https://youtu.be/48iKKC3AOZQ

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #35 on: November 14, 2017, 04:51:27 PM »
I connected an earth ground to the negative of a SEC and it lit up 9 white LEDs dimly, and i just had to ask you guys if this is something unusual, or whatever?

Maybe this is totally normal, but I was just blown away as this is totally new to me.

Here is a link to a short video.

https://youtu.be/48iKKC3AOZQ

Could this be the same as in one of Stifflers own videos where he was exciting one of his antenna coils from ground, in a Aluminium pan?

If so, did the Al-pan aCT as an antenna of sorts in that case?

I am going to see if I can find a link to that video.
It is on his youtube channel.

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #36 on: December 04, 2017, 03:16:38 PM »
Do anybody have any information on the parasitic plate that Stiffler is using ?

I have tried to make my own with Al-tape on each side of the PCB that i am using as a insulator.

Stiffler is using Tin (Sb) and Copper with his plate, but I didnt have any Tin sheet or Cu so i went with Aluminium.

I notice that there is an increase in both brightness in the Leds and the mA draw, but i want to explore it futher, becouse Stiffler seemed to put emphasis on its importance for some applications, like heat for example.

Thanks.

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Dr Ronald Stiffler SEC technology
« Reply #37 on: April 30, 2018, 11:32:36 PM »
 Dr.Stiffler shared a new Vid and Schematic
 thx to user Microvolt at Aaron's forum and to Dr.Stiffler for having the schematic posted there.

http://www.energeticforum.com/renewable-energy/9717-dr-stiffler-sec-replications-11.html

 

https://www.youtube.com/watch?v=PIcaDtSUT3I&feature=youtu.be

respectfully
Chet K

Slider2732

  • Full Member
  • ***
  • Posts: 119
Re: Dr Ronald Stiffler SEC technology
« Reply #38 on: May 01, 2018, 01:04:11 AM »
That's so good to see him posting vids again.
I knew he'd not been well, but nothing about what the problems were...am certainly wishing him many good years ahead.

Will drag out my old SEC copies, built 4 or 5 back in the day.
Yes, Panacea were quite wonderful at the time, with lots of useful knowledge and experiments.
It's doubtful that an SEC 18 can be built on a breadboard, but can be made to work using the right components and soldered up on veroboard with care and in similar placements.
Pigtail length of the L3 is important and all sorts of other elements are true that Doc Stiffler always said about. Best success of an easy to make L3 was ~20AWG wound on top of an empty solder tube. L1 and L2 can be made from 1000uH axial inductors, but that will impact output, rather than a wound form. 2N2222A's seem to be best suited as the transistor, but others will work. Lots of experimentation room left in the circuit. 
 
Edit: found a few and wound an L3 with 26/28AWG, 90 turns:


Slider2732

  • Full Member
  • ***
  • Posts: 119
Re: Dr Ronald Stiffler SEC technology
« Reply #39 on: May 01, 2018, 07:20:42 AM »
Here we go, one of them is running now, with that L3 made earlier.
It's sat on a ceramic bathroom tile, that has 4 felt feet under it...Doctor Stiffler always used to raise the circuits out of the way of any metal or other grounding.
This one was made about, hmm 6 years ago or somewhere and is now running on a 5V USB wall adapter.
It needs a ground plane to run, in this case some transformer laminations (to the left of the circuit), connected to the variable capacitor.
A click with a BBQ lighter fires it up, then the small variable capacitor tunes it.
It's pretty poor for output, but at least runs.

The blue LED's are on AV plugs to one of the ends of ferrite chokes, salvaged from old PC monitors. They're just sat near the L3 and are running wirelessly.


Update: a new L3 has been wound. 80 turns of ~20AWG.
The output is much better, an LED on an AV plug is connected to the old L3 in the pic.
Am using a whittled matchstick to tune and even that's not the best...get anything metal or the human body near these circuits and the tuning shifts.
« Last Edit: May 01, 2018, 06:15:54 PM by Slider2732 »

Slider2732

  • Full Member
  • ***
  • Posts: 119
Re: Dr Ronald Stiffler SEC technology
« Reply #40 on: May 02, 2018, 06:23:52 PM »
OK, so now to Dr. Stiffler's latest vid and schematic, as best I can.
Without having a similar Cree board or a settable power supply, input voltage is still the 5V USB wall adapter.

A 1W LED is on quite a thick stock heatsink, that many will be familiar with.
Pigtail cut off on the L3.
The reverse AV plug is made of 2x 1N4148's, connected to the input supply negative. 
Input is 50mA, as measured with an Innova 3300 DMM and output seems to be in the ball park of 1/4W from the LED.
So in other words, it's lighting the 1W LED at approx 1/4 full rated output for 1/4 the rated input...very little in the way of losses if any.
There's also no faux ground now on the homemade SEC 18, which is an improvement.

:)


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #41 on: May 03, 2018, 02:20:37 AM »
    Hello Slider:
   Although I forget his name now, there was a guy that showed lighting 100 leds, with the previous Stiffler PSEC Exciter circuit. Using no input source, just connected to a ground line.
And that was a few years ago. Has there been any advances since then?
  The Doc gave up on his own self running circuits, a while back, and went to other projects instead.
I guess that he's been sick, all this time?

   Remember that there is always stray AC running through your floors, tables, metal surfaces, etz, and also on any electronics connected to the grid. Which can also light leds on an AV plug.
You need to turn off your house breakers, to be sure that the stray AC is not the cause of the "effect", on that type of low voltage device.
   The stubborn Doc would never show his device working outside and away from man made sources. His ground line was always connected to the AC grid ground rail, instead of to an outside Earth ground.

   Isn't the idea, that the PSEC is supposed to self run? Not lighting the bulbs at 1/4 the normal input, and only getting 1/4 the normal  output... That doesn't sound like any gain, to me, as I understand it.
"Very little in the way of losses"  sounds more like, very little in the way of gains. 
Perhaps I missed something...
 
« Last Edit: May 03, 2018, 06:26:11 AM by NickZ »

Slider2732

  • Full Member
  • ***
  • Posts: 119
Re: Dr Ronald Stiffler SEC technology
« Reply #42 on: May 03, 2018, 04:40:31 AM »
Hey Nick, long time no chat !
My homemade version will be only a slice compared to a real SEC 18, but seems to work ok and I was pleased with this test. There's not a lot to jump and down about, sure, but it also looks like Dr. Stiffler has only posted that first video to get back into things again.
As it stands, the experiment worked like an re-introduction (to me anyway) of this different form of wireless energy circuit.
Using a ground line to an outdoors stake should help the system out quite a ways...will be testing such things myself.

And yes, very valid point, there are all sorts of things going on with mains, capacitances, perhaps even wifi, phone and radio signals in some cases.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Dr Ronald Stiffler SEC technology
« Reply #43 on: May 03, 2018, 06:19:15 AM »
  Slider:
  Good to hear from you too.
   Don't forget about Stiffler's "spacial resonance" factor, possibly his unique key to self running.
Bigger coils might yield higher outputs,  along with a tuned earthground   
   I do miss the old fart. Good to see him doing his thing,  again.

antimony

  • Sr. Member
  • ****
  • Posts: 265
Re: Dr Ronald Stiffler SEC technology
« Reply #44 on: May 05, 2018, 04:49:59 PM »
Oh Nice to see people are active here in this thread.
I was just going to post that Dr Stiffler has recently posted a new video on his channel called, and i was pleasantly surprised that there were people posting here. :)

I have also missed him, although i wasnt rhere at the time. But i am glad he is still active.

Ps. Are mikrovolt here on OU too?