Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: TD replications  (Read 155311 times)

gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: TD replications
« Reply #240 on: March 22, 2017, 08:53:36 PM »
Luc,

How can the 16.125 inches of pull data that you collected be 180 degrees?

Since it can not be 180 degrees then the illustrations that were added can not be correct.  They should then have the rotor magnet at 45 degrees to the slide magnet, then rotate 45 degrees (8.125 inches of pull) so they are now in the output position and the slide released, then the slide is held and the rotor is turned another 45 degrees (8 inches of pull) thus covering the 90 degrees of pull distance you measured.

Now if the 16.125 inches of pull took the rotor magnets from 90 degrees to the slide magnets and placed them in the output position and then the slide was released and then you pulled another 16.125 inches for the next 90 degrees of rotor rotation and if that had the same force measurements as the first 16.125 inches of pull,, THEN your assumption is correct

This is where I am confused.


That's where the error was. It never was 16.25 inches!!!... it was twice that!, being 32.5 inches.
Do you understand now?


Luc

gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: TD replications
« Reply #241 on: March 22, 2017, 10:50:01 PM »
I have 129 steps times 0.125 = 16.125

Yes, I see your point. I'm going to go over it all to see how that part could of happened but maybe it's as simple as the 129 samples were taken every .25 inches and I thought it was .125 inches?

I'll go over it to try to figure it out but for sure there's no error with 129 samples for 180 degrees.

Regards

Luc

gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: TD replications
« Reply #242 on: March 22, 2017, 11:16:16 PM »
@webby1

I looked over my original papers and I can confirm the 129 samples were taken every .25 inches. It was the output sample that were taken every .125 inches.

Hope this satisfies your concerns

Regards

Luc

woopy

  • Hero Member
  • *****
  • Posts: 608
Re: TD replications
« Reply #243 on: March 23, 2017, 11:13:59 AM »
Bonjour Laurent,

You may want to test Floor's recent suggestion of magnet shielding: http://overunity.com/17097/magnet-force-shield/msg502025/#msg502025

Floor's video demo: http://overunity.com/17097/magnet-force-shield/msg502025/#msg502025

Kind regards

Luc

Hi Luc

Yes i have tried the Floor's config.

So first, yes the shielding magnet seems to slide easily through the first stuck of magnet, but at the expense of a strong up or down force (in fact this is the slider's stroke force of your V2 version), so this up or down force (depending of the vertical orientation  of the stack of magnets) should be strongly directed with very good build and efficient sliding gear to maintain the magnet on the path and avoid too much friction losses. And so to be able to precisely measure the engage and disengage energy. By hand due to all the mixing forces it is of course impossible to correctly estimate .

The second thing i notice, is that the shielding effect seems to be some how effective when the second (moving "piston"  ) magnet is very near to the shielding magnet, but at some distance, some repelling force is always present.
So there is not a  complete cancellation of the repelling force , anyway with my magnets crude manual  test and ,another time, by hand it is not possible to really estimate, due to all the mixing forces.
So it seems that we  always need some mechanical force to approach the "piston" magnet towards the shielding magnets. Adding that this "piston " magnet exhibit also strong torque and up and down forces, that have to be correctly directed by a efficient  mechanical device to maintain the path.

I tried to double the thickness of the shielding magnet, but all the above stay more or less the same.

So to be able to test properly , we need to invest time and energy for a very well and sturdy build, with very fine scale and a lot of time to detect if there is any OU possibility.

But by doing those crude manual test, i am sorry to say that i did not get the "waouuuhhh" feeling, that could motivate me to go further on this delicate experiment.

So to me, all those systems are very effective and interesting magnetic coupling device , but so far no OU. But i can be and i hope to be wrong of course.

Perhaps Floor will elaborate more and find the right path to the Graal.

Hope this helps

Laurent


gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: TD replications
« Reply #244 on: March 23, 2017, 01:46:12 PM »
Thank you Laurent for sharing your preliminary shielding test.

One thing for sure is, if there's a magnet configuration that can go thru a complete cycle an have a gain it's still unknown.

I'll be keeping an eye on floor's research.

Kind regards

Luc

woopy

  • Hero Member
  • *****
  • Posts: 608
Re: TD replications
« Reply #245 on: March 23, 2017, 03:08:59 PM »
Hi Luc and all

just for fun and without any pretention

it is what i name a "waouuuhhh" moment.

But is it good or not must be tested much bigger, because i don't feel any forces at so small scale.

https://youtu.be/qoHsCzt2uvA


Laurent

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: TD replications
« Reply #246 on: March 23, 2017, 08:36:44 PM »
More seasoned members here will remember Butch Lafonte

for consideration ?

https://www.youtube.com/watch?v=XG3sVLw_WDw

and Butch's channel

https://www.youtube.com/user/LaFonteResearch/videos

apologies for the interruption ,Butch was always a favorite here, not sure what happened [if he is still a member?]

respectfully
Chet K

Cairun

  • Jr. Member
  • **
  • Posts: 72
Re: TD replications
« Reply #247 on: March 24, 2017, 02:32:32 AM »
@webby1

I looked over my original papers and I can confirm the 129 samples were taken every .25 inches. It was the output sample that were taken every .125 inches.

Hope this satisfies your concerns

Regards

Luc


Luc,


I understand now.  Thanks for the clarification.


Regards,
Alex




Floor

  • Guest
Re: TD replications
« Reply #248 on: March 24, 2017, 11:35:27 PM »

GammaRayBurst hasn't posted since march 2015

Here is some his pseudo solid stuff of his I was looking at back around  then.

http://overunity.com/14070/super-simple-way-to-see-proof-pseudo-solid-principle-works-using-ring-magnets/msg380041/#msg380041

                 floor

Floor

  • Guest
Re: TD replications
« Reply #249 on: March 24, 2017, 11:55:48 PM »
@Woopy

Here are some drawings and details of that particylar interaction  @

http://overunity.com/17097/magnet-force-shield/msg502025/#msg502025

I'm setting up to measure the inputs and output now.

@Ramset

This  (below) is more related to the current topic than the Gammarayburst / pseudo solid stuff.

http://overunity.com/14412/mag-mirror-engine/

       floor

Floor

  • Guest
Re: TD replications
« Reply #250 on: March 25, 2017, 12:23:36 AM »
@woopy

Here are some drawings that clairfy the interactions (in vthe video) some what  @

http://overunity.com/17097/magnet-force-shield/msg502025/#msg502025

I am setting up to do the input put put measurements today / tomarrow.

@Ramset

Here is a device more closely related to the current topic  @

http://overunity.com/14412/mag-mirror-engine/

                best wishes
                        floor


Floor

  • Guest
Re: TD replications
« Reply #251 on: March 26, 2017, 09:13:19 PM »
@Gotoluc

If it interests you... somethig I would like to see... is a really good  replication / redo
of the TD (twist drive) tests I first presented / ask for at the start of these topics.

             best wishes
                   floor

gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: TD replications
« Reply #252 on: March 28, 2017, 05:57:47 PM »
@Gotoluc

If it interests you... somethig I would like to see... is a really good  replication / redo
of the TD (twist drive) tests I first presented / ask for at the start of these topics.

             best wishes
                   floor

Hi floor,

I'm taking some time off but will keep an eye on your results.

Kind regards

Luc

Floor

  • Guest
Re: TD replications
« Reply #253 on: March 28, 2017, 11:20:30 PM »
Your efforts / innovatios have given us lots of good information...

includeing

"Luc's force"
and
what is needed  to improve our processes.

         bravo !
           best wishes
              floor

burnit0017

  • Sr. Member
  • ****
  • Posts: 296
Re: TD replications
« Reply #254 on: May 01, 2017, 01:42:34 PM »
https://youtu.be/jKIWcJiJs04

hi, possible suggestion for adding a flywheel. use a one way bearing on the flywheel. if a PMA is used for a generator than a buck converter can be used to reduce the (I squared R) loss at the stator. Just a suggestion.