Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Partnered Output Coils - Free Energy  (Read 3501301 times)

barbosi

  • Sr. Member
  • ****
  • Posts: 261
Re: Partnered Output Coils - Free Energy
« Reply #7860 on: February 20, 2017, 05:10:32 AM »
So, simply, My Input was not Loaded by my Output I have shown for many years, a complete disconnect from Input to Output!!!

After about 2 years, by answering a simple question you have the chance to make a statement that would round up your 500+ pages:
WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT?

Full details please.... It's time already.

hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7861 on: February 20, 2017, 05:15:33 AM »

After about 2 years, by answering a simple question you have the chance to make a statement that would round up your 500+ pages:
WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT?

Full details please.... It's time already.




As all ways and as expected... 500+ Pages and 50+ YouTube Videos a Small Book and Barbosi still does not get it...


Comprehension issues!!!



Flux Gate Magnetometer standard Practice...


I could have just said: Magic


   Chris Sykes
       hyiq.org




P.S: I should add, my input, as does others, will actually go down when adding a Load... But you all should already know this?


hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7862 on: February 20, 2017, 07:41:35 AM »



Damn, I always liked Brad, I remember him from way back. I am upset that this has happened, twice now, more upset than I thought I would be, when agreeing to this replication. Fore sight can not really prepare you for this sort of thing! Now I know how Obi Wan Kenobi felt when Anakin went to the Dark Side!

2 Pi F L is a powerful little equation. Ohms Law is also, I was told, Ohms Law is your friend, use it. Each give a similar result to such simple problems.

BTW: Brads Inductance on the Input Coil was 4.6mH

   Chris Sykes
       hyiq.org

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Partnered Output Coils - Free Energy
« Reply #7863 on: February 20, 2017, 08:38:37 AM »
hyq.org
More infomercials I see
a nice little business you try to grow on Stefan's back?
Quote
 500+ Pages and 50+ YouTube Videos a Small Book
end quote

your not the first and you won't be the last

Lord knows you have tried hard enuff with your endless advertising here  for 2 years

I do strongly suggest you get to your point here ,besides calling most of the membership here liars, thieves
and Goons, managed By Stefan.
and once again highlighting the TinMan .

My Grandson could tell you the magic of a transformer going down in input as a load is applied .




hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7864 on: February 20, 2017, 08:42:46 AM »
hyq.org
More infomercials I see
a nice little business you try to grow on Stefan's back?

your not the first and you won't be the last

Lord knows you have tried hard enuff with your endless advertising here  for 2 years

I do strongly suggest you get to your point here ,besides calling most of the membership here liars, thieves
and Goons.
and once again highlighting the TinMan .

My Grandson could tell you the magic of a transformer going down in input as a load is applied .






Chet K - Clearly youre no Gentleman - You have also been asked many times to leave.


You refuse to, which shows your intent!


I will ask you again, Chet K Please leave and don't ever come back!


   Chris Sykes
       hyiq.org





Stillll Nottttt Leavingggggg...


   Chris Sykes
       hyiq.org




P.S: Why is it, that, it is, only you, that makes threats about Steffan? Is it that you see Steffan as a Governing Figure? Or an Authoritative Figure? Although he may own the DN and Site, he is just a man! No doubt enjoying Sausages and Beer...



ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Partnered Output Coils - Free Energy
« Reply #7865 on: February 20, 2017, 08:53:53 AM »
hyiq.org
why would you perceive that as a threat ?

I find that very Odd

hyiq.org
If I was to come to you forum and call all your members thieves and Liars managed By You
with ZERO evidence?


that's a threat ?

Just reposting you own words here ,how is that a threat ?

oh and to answer once again " Still not leavinggggg???"
you called me didn't you?

did you get bored here talking to yourself, not stimulating enuff?

how about the point

My Grandson could tell you the magic of a transformer going down in input as a load is applied .






hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7866 on: February 20, 2017, 09:00:05 AM »

hyiq.org
why would you perceive that as a threat ?

I find that very Odd

hyiq.org
If I was to come to you forum and call all your members thieves and Liars managed By You
with ZERO evidence?


that's a threat ?

Just reposting you own words here ,how is that a threat ?

oh and to answer once again " Still here???"
you called me didn't you?







Chet K - Clearly youre no Gentleman - You have also been asked many times to leave.


You refuse to, which shows your intent!


I will ask you again, Chet K Please leave and don't ever come back!


   Chris Sykes
       hyiq.org





Stillll Nottttt Leavingggggg...


   Chris Sykes
       hyiq.org




P.S: No, and No, and I was thinking out loud, and no...  Just a Man, a Public Forum... and No... Enter at your own risk, and No...




P.P.S: I did actually shut down my forum because of Lies, Deception and Infiltration... Just for the record... And No, this is not an invitation to come back!!!






ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Partnered Output Coils - Free Energy
« Reply #7867 on: February 20, 2017, 09:04:52 AM »
Chris Sykes
       hyiq.org  500+ Pages and 50+ YouTube Videos a Small Book





how about your recent point.

  Chris Sykes
      hyiq.org
Quote
Magic I should add, my input, as does others, will actually go down when adding a Load.
end quote

 Why would you call this  magic ?

happens with any transformer when played with outside of the circuit it was designed for ?
and even in Cheap motor speed control circuits?

From your infomercial

darediamond quote
But MY LOAD WHICH IS A DC MOTOR DID NOT AFFECT THE INPUT WATTAGE AT ALL. I REAPEAT AT ALL

No  Magic just a typical Motor speed controller....

Chris Sykes
      hyiq.org

you invited experimenters to your party

first you thru out Luc [bad result nothing special

Now Partzman did too good a job [extra bad result nothing special

Chris Sykes
      hyiq.org
Quote
Partzman WOW, what an amazingly, throughly dedicated, very specific focus on accuracy Partzman... I know some of your background, but really, is this because Tinman was caught, again, Miss-Leading the masses? Come on, be honest, do you work for, take orders from or have you had any kind or direction from Chet K or any Minion that does the said biddings for?
end quote

Chris
your burning through all the guys who know how to measure here !!

maybe you'll just have to fall back to measurements and how its done properly?

I know it did not work out too well your first and only time  two years  ago .

Please teach us how to properly measure your  work


How you taught the lostFox to do this
from your infomercial

quote
WOW That's 2028% difference..
end quote

yes I know wistiti and Lostfox now spend countless hours and dollars working for Bruce in search of OU
oh yes and darediamond seems very busy searching too....


you've given sooo much

please teach us how to measure











hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7868 on: February 20, 2017, 09:46:50 AM »



For all welcome readers.

A valuable download: https://www.youtube.com/watch?v=7ZBdvTrmHyY

Use YDownloader if you don't already have an app.

   Chris Sykes
       hyiq.org

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Partnered Output Coils - Free Energy
« Reply #7869 on: February 20, 2017, 10:55:17 AM »
Here are my results of testing a replication of Itsu's circuit using 50mm ferrite toroid wound with 18t and 36t counter-wound windings.  The resonance cap is a 1.98ufd Wima MKS film and the sense resistors are Caddock 1.00 ohm 1% non-inductive film type.

Great care was taken with calibration and measurements as follows-  A Fluke 515A calibrator was used to check the accuracy of the 1v and 10v AC ranges of an HP 3455A volt meter.  The 1v range displayed 1.0007v ac at 400 Hz and the 10v range was 10.0099 at 4kHz.

The voltages measured across the 1 ohm load resistors were then compared to the HP 3455A measurements.  The current probe was also checked by measuring the current thru each load resistor and comparing to the voltages measured by the scope.  The Math channel was used to calculate the input power and was compared to snapshots of CH1 and CH4 with cosine correction of the small phase shift.

The measurement comparisons are as follows-

Tek CH2 .5827v rms
HP 3455A .5889v rms
Current Probe .5723A rms

Tek CH3 .3048v rms
HP 3455A .3050v rms
Current Probe .3005A rms

The "Resonance Measurements" scope pix shows the waveforms of interest.  Math indicates the input power to be 461mW.  CH2 output voltage is 586.2mv which calculates to 343.6mw and CH3 is 305.2mv which equates to 93.1mw for a total output of 436.7mw for a COP = .947.

For an input power comparison, the snapshot for CH1 showed a level of 2.066v rms and the snapshot of CH4 indicated 223.2ma rms.  Therefore 2.066 x .2232 x cos(.189) = .4611w.

Overall the current probe seems to be low in measurement accuracy by 1.4% to 1.8% compared to the scope which would increase the power input and lower the COP if the measurements were corrected.  So, IMO, this device as presented is conservative.  Also this device is not equal to the Preva device in the fact that the bucking windings are connected in-phase with the dotted ends connected together.  As far as I can tell, this would also be similar to the devices tested by Tinman and gotoluc.

If anyone is interested in the scope pix showing data mentioned but not displayed let me know via a PM.

pm



Very impressive indeed PM.

In my updated last post here:   http://overunity.com/15395/partnered-output-coils-free-energy/msg500436/#msg500436 
i also included the input / output measurements (156.8mW / 146mW) for a cop of 0.93, so very close.

The 1 Ohm resistors i use are Metal film 0.6W 1% resistors.

What strikes me as odd is that in resonance your secondary currents (blue and pink) are not either 0 or 180° phased compared to the input voltage/current like mine.

Thanks,   itsu

hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7870 on: February 20, 2017, 01:25:56 PM »





I want to thank Itsu and Partzman for doing the replications they have! This is some excellent work!!!

We did start of with: "All normal nothing strange" until I pointed out a few things. I would like to point out, Itsu has now done 5 Videos, each better than the one before.

   MrPreva replication 1 : https://www.youtube.com/watch?v=GHA6hnKziAU&feature=youtu.be
   MrPreva replication 2 : https://www.youtube.com/watch?v=mm6K-3O8rM0
   MrPreva replication 3 : https://www.youtube.com/watch?v=30oujoUF2Uc&feature=youtu.be
   MrPreva replication 4 : https://www.youtube.com/watch?v=SgH5rl3TIAM
   MrPreva replication 5 : https://www.youtube.com/watch?v=PwkncpQs70g

Now something I am a bit concerned about, is the lack of views! We are getting very few people actually watch them! 17, 15 36... Really this is not a very good effort at all...

@Itsu - When you have time, please don't forget my suggestion, please take note of the Coil Winding direction, remove one and wind it back on, the other way. CCW/CW, to CW/CW in this circuit, one way gives a better result than the other. Still not OU, but all the same an interesting result.

You know what, I am very happy that these experiments have been done, I am very sure they have been of benefit to the Experimenters involved!


@Itsu - Do you see where the second two Elephantines might be situated now?

   Chris Sykes
       hyiq.org
« Last Edit: February 20, 2017, 11:06:12 PM by hyiq »

hyiq

  • Full Member
  • ***
  • Posts: 207
Re: Partnered Output Coils - Free Energy
« Reply #7871 on: February 20, 2017, 01:32:50 PM »

Chris Sykes
       hyiq.org  500+ Pages and 50+ YouTube Videos a Small Book





how about your recent point.

  Chris Sykes
      hyiq.org
Quote
Magic I should add, my input, as does others, will actually go down when adding a Load.
end quote

 Why would you call this  magic ?

happens with any transformer when played with outside of the circuit it was designed for ?
and even in Cheap motor speed control circuits?

From your infomercial

darediamond quote
But MY LOAD WHICH IS A DC MOTOR DID NOT AFFECT THE INPUT WATTAGE AT ALL. I REAPEAT AT ALL

No  Magic just a typical Motor speed controller....

Chris Sykes
      hyiq.org

you invited experimenters to your party

first you thru out Luc [bad result nothing special

Now Partzman did too good a job [extra bad result nothing special

Chris Sykes
      hyiq.org
Quote
Partzman WOW, what an amazingly, throughly dedicated, very specific focus on accuracy Partzman... I know some of your background, but really, is this because Tinman was caught, again, Miss-Leading the masses? Come on, be honest, do you work for, take orders from or have you had any kind or direction from Chet K or any Minion that does the said biddings for?
end quote

Chris
your burning through all the guys who know how to measure here !!

maybe you'll just have to fall back to measurements and how its done properly?

I know it did not work out too well your first and only time  two years  ago .

Please teach us how to properly measure your  work


How you taught the lostFox to do this
from your infomercial

quote
WOW That's 2028% difference..
end quote

yes I know wistiti and Lostfox now spend countless hours and dollars working for Bruce in search of OU
oh yes and darediamond seems very busy searching too....


you've given sooo much

please teach us how to measure






Chet K - This is a LOT of very POOR behaviour!!!



I will ask you again, Chet K Please leave and don't ever come back!


   Chris Sykes
       hyiq.org






barbosi

  • Sr. Member
  • ****
  • Posts: 261
Re: Partnered Output Coils - Free Energy
« Reply #7872 on: February 20, 2017, 02:32:19 PM »
I asked a simple question: WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT?
And this is your answer?
As all ways and as expected... 500+ Pages and 50+ YouTube Videos a Small Book and Barbosi still does not get it...


Comprehension issues!!!

As I said before, what you call Partnered Output Coils, is an old coil combination used by Tesla. Here is the picture from his lecture:
https://upload.wikimedia.org/wikipedia/en/9/9b/Tesla-DisruptiveDischargeBox.png
He called it something-yada-DISRUPTIVE-yada-something.
DISRUPTIVE dude!!! you get it?

Apparently not because when one of the followers publishes a picture (like this http://overunity.com/15395/partnered-output-coils-free-energy/dlattach/attach/162537/image// ) you praise him:

Thank You for posting something sensible and of use!!!


A very quick look over your figures, I would see no immediate problem there.

Chris, it is not me with comprehension issues. I raised the ball for you to score, all you had to do was to explain WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT.
All you had to say was in page #1 of this thread, the rest of it confuses the hell out of your followers.
Please stop using the "magic" with elephant pictures, use fields instead.
Can you?

partzman

  • Sr. Member
  • ****
  • Posts: 379
Re: Partnered Output Coils - Free Energy
« Reply #7873 on: February 20, 2017, 04:13:40 PM »


Hi Partzman - Thank you for taking the time to replicate and share your results.

Question, none of the waveforms show an exact 180 Degree Phase Shift like was in Itsu's Wave forms. Itsu's wave forms showing a very clear 180 degree phase shift. I was also able to get the 180 degree phase shift.

Your results on your MrPreva circuit are better than mine. I got 82% - Like I have said on many occasions now, the MrPreva Circuit by itself is not OU!


   Chris Sykes
       hyiq.org




Edit: Must be the Colours, yes I see now: Teal and Pink Wave Forms... Nice Work - So, what next then, what's the next step?




P.P.S: WOW, what an amazingly, throughly dedicated, very specific focus on accuracy Partzman... I know some of your background, but really, is this because Tinman was caught, again, Miss-Leading the masses? Come on, be honest, do you work for, take orders from or have you had any kind or direction from Chet K or any Minion that does the said biddings for?

Chris,

Thank you for your comments above and I would like to follow with comments of my own.  First, I will return to my own research efforts that include magneto electric induction, nonlinear electromagnetics and a few other things.

Second, I don't see Tinman mis-leading anybody as he simply experienced measurement errors.  This is very easy to do as I'm sure you know.  When any of us "finds" OU in any particular device, we tend to rush and publish our findings only to maybe discover later that we have an error in logic, connections, measurements, etc.  Been there and done that many times!

Lastly, do I take orders, etc, from Chet and his minions?  Let me try to explain it this way- I work with Chet and his minions (including many you have mentioned here) toward one common goal, that is, to achieve development of a device that safely can supply power in an independent form to release the world from the tyranny of the PTB.  Maybe you don't see it this way, but I even try to work with you.  I have never received any compensation from anyone in my FE efforts over the past 35 years but I have received ideas, encouragement, correction, critcism, and the comfort knowing others suffer thru this journey like myself.  As we all progress together in this effort, we only create delays and harm by devouring each other for whatever reasons, and this is exactly what the PTB wish us to do.

There are many in this research area that claim this and that and some no doubt really do have something.  But honestly, this is way bigger than any one individual and will require the efforts of many to achieve overall success if that is possible!  Maybe we all should try to chill out a little and focus on the real problems at hand.

Respectively,

pm


partzman

  • Sr. Member
  • ****
  • Posts: 379
Re: Partnered Output Coils - Free Energy
« Reply #7874 on: February 20, 2017, 04:23:28 PM »


Very impressive indeed PM.

In my updated last post here:   http://overunity.com/15395/partnered-output-coils-free-energy/msg500436/#msg500436 
i also included the input / output measurements (156.8mW / 146mW) for a cop of 0.93, so very close.

The 1 Ohm resistors i use are Metal film 0.6W 1% resistors.

What strikes me as odd is that in resonance your secondary currents (blue and pink) are not either 0 or 180° phased compared to the input voltage/current like mine.

Thanks,   itsu

Itsu,

Yes, our results do reasonably agree with the exception of the output phase shifts.  This may be due to the fact that I used a power amplifier with a very low output impedance as compared to your Rigol generator with it's 50 ohm source impedance.  I still have the test setup in place so I'll do a little checking on this.

pm