Free Energy | searching for free energy and discussing free energy

New theories about free energy systems => Understanding OverUnity => Topic started by: that_prophet on January 13, 2015, 02:06:05 AM

Title: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on January 13, 2015, 02:06:05 AM
Come on guys
Let’s get with the program
This works, and is so logical that it must work

You put a very small amout of DC electrity into a motor
That has a large 100 cm circumference pulley + only has to rotate once
Then you use a belt or strap to connect it to one or more mini pulleys,
That are of 1 cm circumference, which rotate 100 times + have AC motors

So you put in 1 unit of DC electricity
To gain 100 units of AC electricity = 50 – 100 electricity multiplier

please remember, you could add many mini pulleys
multiplying your electricity by massive amounts
dont listen to satan`s torque arguements

think of how easily mini motors turn
it takes practicallly no effort

This is not only free energy from God =(Eze 1:16)
DIAGRAM + DISCRIPTION @ http://free-energy.yolasite.com/
...
So, not only do we know free energy as Truth, but it is also good news in 2 tways
1) This will take away massive sums of money given to nations growing terrorists
+ This is info from The Big Guy Himself, so
2) This was found as a description of the workings of a UFO, so we should be able to discover antigravity, or be able to figure what ever helps these UFO’S levitate + travel so fast

(EZE 1:16) The appearance of the wheels and their work was like unto the colour of a beryl: and they four had one likeness: and their appearance and their work was as it were a wheel in the middle of a wheel.

as in, a little wheel inside a big wheel, but I could not afford to buy a big wheel with threeding on the inside, and a mini wheel with the same threeding on its outside. So I did the next best thing, I connected a big wheel to a mini wheel through a belt, stap, rope or even a piece of string in a pinch to connect the two pulleys with motors attached. This was easier to build out of many parts that one might have around, especially for the Tribulation Saints, when they are running from the evil authorities = in less than 5 years. http://my2020vision.yolasite.com/

Please remember this, when before 2020 the Tribulation starts = 7 year peace treaty signing with Israel = START OF TRIBULATION

Please view all the info that I have picked up @ http://beliefstoliveby.yolasite.com/
He gave me these two other Gifts also @ http://ultimatejoysticks.yolasite.com/
(an awesome next generation joystick = measures movement in all three axis’s + measures rotations in all three axis’s = that’s 6 movements = 3 times basic joystick) -
AND http://ultimatevideogamecontrols.yolasite.com/
(which is awesome 3D virtual reality room = video on all 4 walls + ceiling + floor )

These are all free for all to use, as they are displayed on the web + are without patents
We should use these to earn plenty of income to help http://fire-starter.yolasite.com/ spread the Gospel.
Before http://my2020vision.yolasite.com/ occurs, before the
Door closes on Christ return http://doorschristmustpassthrough.yolasite.com/

Now first off let’s loose this fairytale of EVil-sOLUTION
God proves it wrong with His Creation Hourglass = MOON= it only has 6000 years worth of sand on it,,,,,,
http://decimationofthisevolutionfairytale.yolasite.com/

free energy
The only reason that this has not been used earlier to create free energy, are the billions of fallen angels, trying desperately make sure that we never discover this technology
free-energy.yolasite.com
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: LibreEnergia on January 13, 2015, 10:04:13 PM

...dont listen to satan`s torque arguments...


So you're telling me satan is all torque and no action?



Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: dieter on January 13, 2015, 11:44:51 PM
Regardless of the religious aspects, there is something interesting about this topic:


While the translation with pulleys and belts to achieve a multiplication of the RPM  can be done at the cost of losses like friction etc. , the increase of frequency in AC is indeed equal to the increase of energy. Is there a flaw in this thought?


BR

Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on April 22, 2015, 03:09:24 AM
So you're telling me satan is all torque and no action?

NO,,, what I happen to be saying is that there is no torque problem,
you are gaining so many rotations from the mini-pulleys,
that the torque is divided up into almost nothing

I happen to be struggling with an electronic simulator at the moment,
trying to get a working model of the awesome free energy machine that God Shared with me,,,
I believe that He wishes for this to be priority for me,
it is so simple, and easy to build,
could I ask for help getting a working model of this device out to the world,
http://free-energy.yolasite.com/
evil forces have put up barriers for me at every turn,,,,,,,,,,,,,,,,,
THIS WORKS, IT IS SO SIMPLE THAT IT HAS TO WORK

this device generates AC electricity by using mechanics of varying pulley sizes to multiply rotations, 
generated additional AC electricity by using multiple generators

Free Energy made simple = electricity multiplier using 100cm to 1cm pulleys

Don’t believe in God or good + evil forces
Free Energy is so simple,,, that it MUST be hidden by evil forces.

It is simplicity at its best; you simple put the minimal power into a DC motor with a 100cm pulley connected to it, which only has to rotate the once. This large pulley is connected to a belt, strap, rope or even string in a pinch, which is also connected to another small one cm pulley, which rotates 100 times. So you put in the DC power to rotate your input motor only the once, and you get out of this system 100 cycles of AC power. You have just created your first free energy machine, that multiplied your electricity by 50 or 100. If anybody starts complaining about torque being a problem, just think about how smoothly bearings are nowadays, as well as how easily electric motors rotate. You could add ten of these small pulleys, without gaining any sufficient torque, giving you a 1000 power electricity multiplier.

A drawing and better description of how this works is at:
http://free-energy.yolasite.com/

Please believe me + not all of the evil spirits
That are continuously saying, “this won’t work”

Free energy is super simple
It has been staring us right in the face
Ever since we discovered how to make AC electricity

How is AC electricity made?
It is simply made by rotating wheels
With these wheels connected to an AC motor
Which is easily created, by using a few coils of wires
And rotating them within the field of two opposing magnets

They will try to say what about torque
Torque is not a problem in the slightest,
As electric motors are the easiest to rotate
They have some of the smoothest running bearings

So you could add tens, maybe even hundreds
Of these AC motors, attached to mini pulleys of one cm circumference
On the same belt that you have a DC motor attached to as a drive motor
With a large 100 cm circumference pulley or even larger
So you only have to input enough electricity to rotate the drive motor one rotation
Then you get 100 cycles of AC electricity out of this system
For every mini pulley with an AC motor attached that you connect to the belt

Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: TinselKoala on April 22, 2015, 05:44:21 AM
If you think this idea came to you from God, you are profoundly mistaken... or perhaps your God is just lying to you. Six threads! The same copy-paste nonsense in SIX threads!
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on April 22, 2015, 09:06:00 PM
If you think this idea came to you from God, you are profoundly mistaken... or perhaps your God is just lying to you. Six threads! The same copy-paste nonsense in SIX threads!

yes, I believe that this idea came to me from the Holy Spirit,
because I ask God for a way to help the Tribulation Saints,
+ it was immediately that this awesome free energy device idea came to me
very clearly + rapidly in a  Vision

I will be hoping that many might start believing in Jesus,
After the 2520 day-7 year peace treaty is signed by Israel + Europe,
Before the 2019.1 Door closes,,,

Starting the TRIBULATION 

Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on April 23, 2015, 07:20:00 PM
Regardless of the religious aspects, there is something interesting about this topic:


While the translation with pulleys and belts to achieve a multiplication of the RPM  can be done at the cost of losses like friction etc. , the increase of frequency in AC is indeed equal to the increase of energy. Is there a flaw in this thought?


BR

To put things more precisely, you are using pulleys to multiply the total number of rotations,(RPM) through the simple geometry, of both varying circumferences of pulleys + introducing a number of generators connected to mini pulleys, attached to the same belt, strap, rope or string in a pinch.

with these newer motors/generators you are only loosing fractions to friction, as these motors are so smooth in their running
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: LibreEnergia on April 24, 2015, 01:19:41 AM
To put things more precisely, you are using pulleys to multiply the total number of rotations,(RPM) through the simple geometry, of both varying circumferences of pulleys + introducing a number of generators connected to mini pulleys, attached to the same belt, strap, rope or string in a pinch.

with these newer motors/generators you are only loosing fractions to friction, as these motors are so smooth in their running

Thanks so much for this piece of genius..

I've used it to build an over-unity tank that once set in motion will undoubtedly be able to destroy the world. The tracks are not dissimilar to how you describe and I simply added a few motor-generators at various places around the periphery and take the output to power a very efficient HHO plant that then feeds fuel back into the main engine.

Do you think I should start it up?
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: norman6538 on May 11, 2015, 09:52:23 PM
Your analogy for 100:1 is valid for turns but not for watts generated. Remember when generating electricity there is a Lenz counter to motion force that shows up and that is where the big price to be paid is.  If it were not there then a generator could generate either 10 or 100 watts out for the same mechanical power in rotation wattage.


Norman
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: Paul-R on May 12, 2015, 03:35:27 PM
This idiot has brought up the same idea many times.

STEFAN: Can you warn him and ban him on his next new thread?
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: Pirate88179 on May 13, 2015, 03:24:12 AM
This idiot has brought up the same idea many times.

STEFAN: Can you warn him and ban him on his next new thread?

I agree.  His idea is invalid BUT, he has the right to propose it on a topic started for his idea.  Not 7 topics!

That is nothing but spam as he copies and pastes from one topic to all of the others.

Bill
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on August 16, 2015, 10:55:45 AM
Thanks so much for this piece of genius..

I've used it to build an over-unity tank that once set in motion will undoubtedly be able to destroy the world. The tracks are not dissimilar to how you describe and I simply added a few motor-generators at various places around the periphery and take the output to power a very efficient HHO plant that then feeds fuel back into the main engine.

Do you think I should start it up?

if you use GEOMETRY to multiply the # of rotations,
you can defeat the laws of thermodynamics
as AC motors/generators use rotations to generate AC electricity

if you start turning the 100cm pulley by hand, rotating it once gives you 1000 units of AC electricity,
are you trying to tell me that 1000 units of AC electricity, when put through a full wave bridge rectifier
does not have the voltage to rotate your 100cm circumference pulley on your drive motor more than one single time
effectively giving you a free energy, AC electricity generator

it is truly that simple
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: verpies on August 16, 2015, 12:28:44 PM
if you start turning the 100cm pulley by hand, rotating it once gives you 1000 units of AC electricity,
...and a rotation of a 1cm pulley attached to an ideal generator's shaft once, will be converted to the same amount of electric energy.  So what is your point?

Why don't you call the units of electric energy by their proper name - Joules ?
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: TinselKoala on August 16, 2015, 07:53:51 PM
Not Again!
Run out of your meds every three months like clockwork, and start spamming the forums again with this silly idea which is founded on a profound lack of understanding of reality and an evident inability to perform simple mathematical calculations.
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: ayeaye on August 18, 2015, 12:03:52 PM
That_prophet, you show that you are worthless in every damn way. What is it, are you on drugs that prevent your neurons from communicating with each other or something?
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: guest1289 on August 19, 2015, 12:27:30 AM
This idea has  existed  for a  long,  long time.    But,    back then,   they did not have  magnetic-bearings,  or other  things.

(  I assume this idea was scientifically disproven years ago,  but I will still submit this post )

I can only think of this idea( the idea this thread is proposing )  in the following  scenario  :

  -  Not using any belts or pulleys.

  -  You turn a  'tiny-dial-set-in-the-center-of-a -very-large-wheel',  and then that  'very-large-wheel'  turns a  wheel( or wheels ) which is the same size as the original  'tiny-dial-set-in-the-center-of-a -very-large-wheel' .
 
  -  Every  wheel is rotating on  'magnetic-bearings' (  and I just designed the ideal bearing ).

  -  The wheel  turning another wheel( or wheels ) ,   only does so by a  special-type-of-magnetic-cogs( hopefully more based on repulsion,  rather than attraction ).
      THE TYPE OF MAGNETIC-COGS  I'M THINKING OF,  WOULD USE A  BRICK-WALL  TYPE OF PATTERN FOR ARRANGING THE MAGNETS,  TO  COUNTER-BALANCE  EACH OTHERS  MERGE-POINTS( STICKY-POINTS ).
        VISUALIZE  ONE  LAYER  OF  BRICKS( MAGNETS ) IN THE BRICK-WALL,  BEING SEPARATED BY A CERTAIN DISTANCE,  FROM THE NEXT LAYER OF BRICKS( MAGNETS ) IN THE BRICK-WALL,  SO THAT THE DIFFERENT LAYERS OF BRICKS( MAGNETS ) ON THE TWO WHEELS,  CAN  GRIP EACH OTHER SEPARATELY FROM THE OTHER LAYERS,   NO INTERFERENCE BETWEEN LAYERS.
        If this  cog-wheel-design  would not work,  then the  worst  result would be that the two wheels would have less grip on each other,  too much slippage,  or total slippage,   so you'd have too get that just right.

  -  I do not know how much my design reduces  Torque,  in terms of friction.  (  Any other sources of  Torque,  are too difficult for me to fully visualize,  or appreciate  ).  I'm sure there's inertia from weight of wheels,  but I don't know how much  etc etc.

 
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: guest1289 on August 28, 2015, 04:16:38 AM
I  cannot  find  anything( reason )  to  'Disprove'  my  'Solution'  to making the  'Idea proposed in this thread'   function successfully.
_______

MY SOLUTION IS  :

  -  Not using any belts or pulleys.    Just use the wheels described below.

  -  You turn a  'tiny-dial-set-in-the-center-of-a -very-large-wheel',  and then that  'very-large-wheel'  turns a  much-smaller-wheel( or wheels ) which is the same size as the original  'tiny-dial-set-in-the-center-of-a-very-large-wheel'  .

  -  Every  wheel is rotating on  'magnetic-bearings' (  and I just designed the ideal bearing ).

  -  The wheel  turning another wheel( or wheels ) ,   only does so by a  NON-CONTACT special-type-of-magnetic-cogs( using either repulsion,  or attraction, or even a combination ).
      THE TYPE OF MAGNETIC-COGS  I'M THINKING OF,  WOULD USE A  BRICK-WALL  TYPE OF PATTERN FOR ARRANGING THE MAGNETS,  TO  COUNTER-BALANCE  EACH OTHERS  MERGE-POINTS( STICKY-POINTS ).
        VISUALIZE  ONE  LAYER  OF  BRICKS( MAGNETS ) IN THE BRICK-WALL,  BEING SEPARATED BY A CERTAIN DISTANCE,  FROM THE NEXT LAYER OF BRICKS( MAGNETS ) IN THE BRICK-WALL,  SO THAT THE DIFFERENT LAYERS OF BRICKS( MAGNETS ) ON THE TWO WHEELS,  CAN  GRIP EACH OTHER SEPARATELY FROM THE OTHER LAYERS,   NO INTERFERENCE BETWEEN LAYERS.
        If this  cog-wheel-design  would not work,  then the  worst  result would be that the two wheels might have too much slippage,    so you'd have too get that just right.

  -  I do not know how much my design reduces  Torque,  in terms of friction.  (  Any other sources of  Torque,  are too difficult for me to fully visualize,  or appreciate  ).  I'm sure there's inertia from weight of wheels,  but I don't know how much  etc etc.
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: TinselKoala on August 28, 2015, 06:06:32 AM
Please review the topics "Moment", "Moment arm", "Torque" in your favourite engineering textbook or online resource.
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: Red_Sunset on August 31, 2015, 06:53:09 AM
yes, I believe that this idea came to me from the Holy Spirit,
because I ask God for a way to help the Tribulation Saints,
+ it was immediately that this awesome free energy device idea came to me
very clearly + rapidly in a  Vision

I will be hoping that many might start believing in Jesus,
After the 2520 day-7 year peace treaty is signed by Israel + Europe,
Before the 2019.1 Door closes,,,

Starting the TRIBULATION

Dear Prophet,
This is too extreme to let pass uncontested.
That you are trying to solve the world energy availability question is a good thing.
But if you believe that God came to help you with that,  I would say to think again.

How would you reconcile: 
 Why would God forbid Adam to eat those apples from that tree ?
     and now he changed his mind and wants mankind to become all powerful ?
     using a energy lossy process that has been used in every gearbox, with none of them producing excess energy ?
     Try riding a bicycle sometime, observe.

I don't see it,  TinselKoala gives some good advice.  Maybe that was God's intention for you.

Red
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: citfta on October 16, 2016, 10:53:59 PM
Your device is useless!
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on October 17, 2016, 12:06:15 AM
Your device is useless!
-
Thank you, for such helpful words
-
free energy is done using pulleys
http://free-energy.yolasite.com/
-
It uses the simplicity of it not taking 100 times as much force turning a 100cm circumference pulley, as it does turning a 1cm circumference pulley, yet you get 100 times more LENGTH OF MOVING BELT to work with. If you run the 100cm of belt by any # of 1cm circumference pulleys, you would gain the # of mini-pulleys times the multiple of 100 units of AC electricity. 
-
THAT IS WHY I CALL THIS AN AC ELECTRICITY MULTIPLIER
-
Lenz law sounds like something electronic, when this works om simple pulley mechanics = 100cm circumference pulley only turns once
+ this gives you 100 turns, X,(times) the # of 1cm circumference pulleys that you attach.
If you attach AC generators to each of these 1cm mini-pulleys,
you would gain 100 units of AC electricity, for every 1cm pulley that you attach.
This could be massive amounts of free AC electricity,
if you added 10's of these mini-pulleys then you would gain 1000's of units of AC electricity,
all done with one spark of DC current, (practically zero)
-
that_prophet - Re: use pulleys to multiply total # of rotations = AC electricity
Quote from: citfta on October 14, 2016, 01:05:13 PM
-
I don't understand how you can be so dense.  You have had numerous people tell you that your idea will not work.  That is because we actually have experience working with motors and generators.
-
REPLY BY ME
I don't understand how mankind be so dense, to not see that this use of pulleys does not involve torque, but simple multiplication of rotations = multiplication of AC electricity. The AC generators are just winding up massive voltage, to turn over your DC motor, only the once, + no current, as you only need one spark to have this self powering.
-
Now try and tell me that you would not be able to get one spark of DC output,
when you have 1000's of units of AC electricity to work with
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: citfta on October 17, 2016, 12:20:24 AM
MOTORS DO NOT RUN ON A SPARK OF ELECTRICITY!!  You seem to have plenty of time to waste posting your foolish ideas, why not spend some of that time trying to learn something useful.  Study the links I gave you to learn how motors and generators really work.
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: massive on October 17, 2016, 06:47:05 AM

you need to sign up here

http://www.energeticforum.com/renewable-energy/


Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: Low-Q on October 17, 2016, 05:11:38 PM
Come on guys
Let’s get with the program
This works, and is so logical that it must work

You put a very small amout of DC electrity into a motor
That has a large 100 cm circumference pulley + only has to rotate once
Then you use a belt or strap to connect it to one or more mini pulleys,
That are of 1 cm circumference, which rotate 100 times + have AC motors

So you put in 1 unit of DC electricity
To gain 100 units of AC electricity = 50 – 100 electricity multiplier

please remember, you could add many mini pulleys
multiplying your electricity by massive amounts
dont listen to satan`s torque arguements

think of how easily mini motors turn
it takes practicallly no effort

This is not only free energy from God =(Eze 1:16)
DIAGRAM + DISCRIPTION @ http://free-energy.yolasite.com/ (http://free-energy.yolasite.com/)
...
So, not only do we know free energy as Truth, but it is also good news in 2 tways
1) This will take away massive sums of money given to nations growing terrorists
+ This is info from The Big Guy Himself, so
2) This was found as a description of the workings of a UFO, so we should be able to discover antigravity, or be able to figure what ever helps these UFO’S levitate + travel so fast

(EZE 1:16) The appearance of the wheels and their work was like unto the colour of a beryl: and they four had one likeness: and their appearance and their work was as it were a wheel in the middle of a wheel.

as in, a little wheel inside a big wheel, but I could not afford to buy a big wheel with threeding on the inside, and a mini wheel with the same threeding on its outside. So I did the next best thing, I connected a big wheel to a mini wheel through a belt, stap, rope or even a piece of string in a pinch to connect the two pulleys with motors attached. This was easier to build out of many parts that one might have around, especially for the Tribulation Saints, when they are running from the evil authorities = in less than 5 years. http://my2020vision.yolasite.com/ (http://my2020vision.yolasite.com/)

Please remember this, when before 2020 the Tribulation starts = 7 year peace treaty signing with Israel = START OF TRIBULATION

Please view all the info that I have picked up @ http://beliefstoliveby.yolasite.com/ (http://beliefstoliveby.yolasite.com/)
He gave me these two other Gifts also @ http://ultimatejoysticks.yolasite.com/ (http://ultimatejoysticks.yolasite.com/)
(an awesome next generation joystick = measures movement in all three axis’s + measures rotations in all three axis’s = that’s 6 movements = 3 times basic joystick) -
AND http://ultimatevideogamecontrols.yolasite.com/ (http://ultimatevideogamecontrols.yolasite.com/)
(which is awesome 3D virtual reality room = video on all 4 walls + ceiling + floor )

These are all free for all to use, as they are displayed on the web + are without patents
We should use these to earn plenty of income to help http://fire-starter.yolasite.com/ (http://fire-starter.yolasite.com/) spread the Gospel.
Before http://my2020vision.yolasite.com/ (http://my2020vision.yolasite.com/) occurs, before the
Door closes on Christ return http://doorschristmustpassthrough.yolasite.com/ (http://doorschristmustpassthrough.yolasite.com/)

Now first off let’s loose this fairytale of EVil-sOLUTION
God proves it wrong with His Creation Hourglass = MOON= it only has 6000 years worth of sand on it,,,,,,
http://decimationofthisevolutionfairytale.yolasite.com/ (http://decimationofthisevolutionfairytale.yolasite.com/)

free energy
The only reason that this has not been used earlier to create free energy, are the billions of fallen angels, trying desperately make sure that we never discover this technology
free-energy.yolasite.com
The problem is that Satan are right about his torque arguments...
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on November 16, 2016, 02:10:04 PM
if you attach a 100cn circumference pulley to a DC motor
it only takes one spark of DC current to rotate DC motor one full rotation.   
this would give you 100cm of moving belt to work with
now if you run this length of moving belt past 1to10 mini -pulleys.
of one centimeter circumference with AC generators attached to each pulley then.
you would get 100-1000 units or cycles of AC electricity. 
these are free running AC generators=(as no load is on them)
-
all of these generators are running with zero load = no electricity being used
just the fluid friction of the bearings is your only wear or load-type
but you could use magnetic bearings + have practically zero friction
so all of these AC generators are just winding up massive voltage
which can be accessed as potential  = ability to do work = available current in load
you have just made your first self powered set of running AC + DC generators
that you could tap power off of + the more mini-pulleys with AC + DC electricity
-
(now.... don't you think that you could be able to get one spark of DC current)
( out of the 1000 units of AC electricity that you have for an output)
(this would make this unit a self powering mechanism = perpetual motion)
(+ this could be producing an unknown amount of AC + DC electricity)
-
http://free-energy.yolasite.com/
-
I happen to be Born Again + want this super simple free energy technology out
before the first Door closes for Christ to return in the clouds by or before 2019.04
It warns us that no one knows the day nor hour... but it says that we will know
when it is near... near to what? maybe the door.... as we can know "even at the doors"
This way the Tribulation Saints have it to keep warm in our cold Canadian winters
even off the power grid. (remember fires would give away your position)
Doors are plural because He does show up twice = Rapture + at end of Tribulation
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: norman6538 on November 16, 2016, 10:58:30 PM
That_profit - rotations is not the same as work. You need to go back to simple machines such as a lever or pulley to understand what work is. Work is weigh/mass times distance.
So we weakling humans can lift a car with a long lever and the way we do it is to
apply our weight at a 20 or 50 times distance advantage that allows us to lift one
corner of a car that weighs maybe 1,000 lbs but we only lift is an inch or so while
we push down many inches.

I happen to have 2 over unity (more work out than work in) devices that I have made
but neither is very useful because they cannot repeat the cycle with the 200% extra
work out. In my case it takes about 300% extra to repeat the cycle. This is the infamous "reset problem". A weight can fall and do work but then the weight has to be lifted
back up again to repeat the cycle.

So all work has to be measured in something like foot pounds or ounce inches etc.
So until you have those numbers its just a dream.

Norman

Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on June 19, 2017, 04:13:19 PM
.       This is so dirt simple that you will kick yourself, after you discover just how super simple this technology truly is. How is AC electricity made, by using rotations of a coil through a magnetic field, and we can use a set of varying sized pulleys to multiply your total # of rotations. So, we can effectively multiply our amount of AC electricity by using simple pulley mechanics.
-
.      This GEM = (Geometrical Electricity Multiplication) technology is super simple, http://free-energy.yolasite.com/ and is based on basic pulley mechanics. In it, you pay a small amount of DC electricity to rotate a large 100 cm circumference pulley one single time, (one mere spark). Then you run the 100 cm of moving belt, (off the 100 cm of circumference) past a mini-pulley of only one centimeter circumference, giving you 100 rotations, which you covert into 100 cycles of AC electricity, by simply adding an AC generator to it. You are merely using the 100 cm of belt that you get off the single rotation of a 100 cm circumference + by running this length of belt by a 1 cm circumference pulley, with an AC generator attached.
-
.     Now, you have just multiplied your single rotation from a burst of DC current into 100 cycles of AC electricity. Please don’t listen to the mythical torque problem, because there is no torque problem. This AC generator is running practically torque free, because all that it has to generate is the single burst of DC current that your DC drive motor takes to make one rotation. And please remember, that you get 100 cycles of AC electricity to generate this single “spark” of DC current to power your drive motor, so this is generating practically zero current, divided by 100.
-
.     If you run wires from your AC generator output, + put them into the input of a full wave bridge rectifier,(4 diodes) + then run wires from the DC output of your full wave bridge rectifier, into the input of your DC drive motor, you should have a working mechanism. This perpetual free energy generator mechanism is complete, + you should be able to start it running by merely rotating the large pulley by hand, a quarter turn.
-
.     Please don’t listen to the torque problem, as it is non-existent. This AC generator is pretty much free floating, as for all of its 100 rotations, it only has to generate one small spark of DC current. That is one small spark of current, that is divided by 100, so you only have to generate 1/100th of a spark of current per rotation, or 1/100th of practically nothing. 
-
.     You must have your AC generator + your DC drive motor of the same voltage.
-
.     This is so simple + cheap to build guys + gals, please build one to prove it works,,,
I live in a nursing home, so I cannot even have the simple tools to build this with. This is so dirt simple + easy to build, that satan is laughing his as? Off, at how gullible we simple humans are. But he will get his just deserts, when Jesus returns in His Glory, before the second door close on 2025.94 = 2019.04(door for rapture) + 6.9(7 Hebrew years = 2520 days) http://doorschristmustpassthrough.yolasite.com/
-
.     So we have less than 19 months to live, before all born again followers of Christ, only those who are looking for His Return, will vanish off this earth in the Rapture = “blessed hope” http://my2020vision.yolasite.com/ http://beliefstoliveby.yolasite.com/

Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on August 26, 2017, 04:57:37 PM
TIME IS SHORT = the Pre-Trib Rapture + the infamous 7 year Peace Treaty with Israel MUST START before this 1ST DOOR closes on 2019.04 = Jan 14th http://my2020vision.yolasite.com/ - “know that it is near, even at the doors”,(Mat 24:33) http://doorschristmustpassthrough.yolasite.com/.
-
Free Energy + perpetual motion can be easily produced using pulleys, costing only the minuscule bit of power that it takes to rotate a DC motor with a large 100 cm circumference pulley one single time. You can gain or multiply massive amounts of AC electricity using mini-pulleys with AC generators. You are capable of doing this by running this long length of belt, (off the circumference of large pulley) past a few 1 cm circumference mini-pulleys, with AC generators attached. This GEM-(Geometrical Electricity Multiplier) device is gaining you 100 cycles of AC electricity, for every mini-pulley that you choose to attach to this sane belt. So, if you added 10 mini-pulleys, you could get a return of 1000=10X100 cycles of AC electricity, and all costing you only one mere spark of DC current. How could you not be multiplying AC electricity, when you are using simple pulley mechanics to trade one spark of DC current, for 100-1000 cycles of AC electricity-(duel sparks).
-
This super simple free energy technology: http://free-energy.yolasite.com/ works on the ability of combinations of pulleys being able to easily + freely multiply your total # of rotations. You can do this because of the fact that you don’t have to expend 100 times more electricity to rotate a large 100 cm circumference pulley, than it takes to rotate a 1 cm circumference mini-pulley. Yet if you run the 100 cm of moving belt, that comes off the one rotation of a large 100 cm pulley, past any # of mini-pulleys of 1 cm, then you could gain a return of 100 rotations for every mini-pulley that you choose to attach to the same belt. (As for torque, it only comes from generating power, and power is voltage multiplied by current) + We only need to produce one single spark of DC current to make this a self-powering mechanism. So one spark of DC current, (which is practically nothing) multiplied by even massive voltage, would still equal practically zero power, which takes practically zero torque to rotate.
-
This multiplication of rotations could be extremely helpful, if you only added AC generators to these mini-pulleys, you could be multiplying the total cycles of AC electricity. This AC generator takes no torque to rotate, because although it would be winding up massive voltage, it does not need to be winding up practically any current-(1 mere spark) which is practically zero. Torque is only caused when you are generating power, and you are generating practically zero power, as power is equal to voltage times current. So, no matter how massive of voltage you are generating, it is multiplied by practically zero current, as we only need one spark of current, or practically zero. This works because zero times anything is still equal to zero, and practically zero works the same way.
-
What is AC electricity, + how is it made = it is made out of the easy rotations of coils of wire through a magnetic field of two oppositely positioned magnets right. Using pulley technology, we can easily + freely convert one rotation of a large 100 cm circumference pulley, into 100 rotations of as many 1 cm circumference mini-pulleys that we choose to attach to the same belt that comes off of your large pulley. So, if you added 10 mini-pulleys to this same belt, and added AC generators to each mini-pulley, you could gain you 1000 = 100X10 cycles of AC electricity.
-
All these cycles of AC electricity are from the single burst of DC electricity, which is the small amount of current that a DC motor takes to rotate one single time =(one mere spark). These cycles of AC electricity would cost practically zero torque to rotate, as torque is only caused when you are generating power, and you are not generating practically any power in this system. This is because although you may be winding up massive voltage,(electrical pressure) to keep this GEM mechanism running, you only need to generate one single spark of DC current, and P=IV, or power equals current multiplied by voltage.
-
So your total power output would be practically zero current multiplied by any amount of voltage, which would still be equal to practically zero power, taking practically zero torque. So, you could be easily + freely generating massive amounts of rotations of these mini-pulleys, which are generating you massive voltage, or the ability/potential to gain plenty of current, which will allow you to produce plenty of power. This is because the greater the voltage/pressure, the greater the ease that there is to generate more current. PLEASE,,, let me show you how ridiculous this mythical torque problem really is. Do you think that the 100 cycles of AC electricity would have a hard time producing the single spark of DC current, which is all that you need to crank over your DC motor once, with your 100 cm circumference pulley attached?
-
Mankind was given the best Gift from God, (other than Jesus) http://free-energy.yolasite.com/ right here in Atlantic Canada + just before the infamous 7 years Peace Treaty. This seven years of time, which the 2nd half of is the Great Tribulation, is when this GEM tech will be needed most. This will be the worst time for earth, where not only is there constant war, but most all of the evil fallen angels, and the Nephilum , will be sent to the earth. Nephilum are the offspring of fallen angels + human women, as angels are all male, because God only wanted there to be a set # of angels. This is not only the ones that are still alive, but also the spirits of all that have died. This could be massive amounts of evil spirits, considering that this includes the ones from before the flood. (How can we be billions of years old, when the moon will leave orbit within 10,000 years) + all orbiting bodies will have messed up orbits, because of this yearly amount of space debris adding mass.
-
This is free energy technology, which we all will need and love, as it has practically no cost to run, and there is no need for any fuel to be purchased. Nor would there be any exhaust to cause environmental or noise pollution. So,,, why haven’t we figured this simple little bit of technology out long ago? Evil spirits are, and have been hiding this simple technology from mankind. These AC generators are extremely easy to rotate, because the only resistance torque,(other than the viscosity of the lubricant in the bearings) would come from a great need for current, which would practically never happen, especially when you are dealing with such small amounts of power as the example that I describe here.
-
I confirmed that this free energy technology, discovered in the early 2000’s, was from God + not from evil forces, by finding it in a UFO motor description in Ezekiel 1:16. Thankfully, there are many ways that we can freely multiply the total # of rotations, like a set of varied sized pulleys, can be easily used to multiply the total # of rotations. Then, by simply adding an AC generator to your mini-pulley, you can convert your rotations into cycles of AC electricity.
-
This is one super simple GEM of an idea, and it is made from pre-school technology, so why was this not out long ago. Can you believe the power that evil spirits have, to be able to dumb down a whole population of humans + for so long. I still have problems getting people to believe that there is no torque problem. Think that this may actually be a good enough reason for you to find out if GOD IS REAL = http://beliefstoliveby.yolasite.com/ + if HE IS RETURNING SOON = http://my2020vision.yolasite.com/
-
Do you want to hear how truly super simple this technology is, Where you only pay to crank over the DC motor one time, with a 100 cm circumference pulley, Then you use the 100 cm of moving belt off this large pulley circumference, + run it past one or more mini-pulleys of only one centimeter circumferences, All that you have to do is add an AC generator to these mini-pulleys, giving you a free return of 100’s of cycles of AC electricity. That’s one small pulse of DC current as an input, returning you 100 cycles of AC electricity output, How can you not multiply your AC electricity, with this rotation multiplication technology
-
IT IS TRULLY THAT SIMPLE
-
Come on Canadians,,,
Come on Nova Scotia,,,
-
This is where this GEM-(Geometrical Electricity Multiplier) technology of free energy for the End Times was 1st started, (early 2000’s when He first shared this with me). Let's get out there and start taking advantage of it, by not only building GEM units to power all of our electric tools, toys + gadgets, but we could be starting companies that have electric appliances, utensils, devices, tools, toys, + gadgets with these GEM perpetual power supplies built into them, (let’s start letting electricity generate itself) + on our labels we could even proudly say "FIGHTING TERRORISM + FIGHTING POLLUTION"
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on August 26, 2017, 04:58:29 PM
PROOF OF CREATION + A YOUNG EARTH = (space dust) has mass + billions of years of dust would add up eventually + mess up the orbits of all planets + moons. We could measure the amount of dust on the moon, and divide the total by the amount of dust that is deposited every year, coming up with an age for the moon, and thereby finding out the age of our earth. Most of us have seen pictures of the moon landing, and realize that there is only a few centimeters, meaning that by the deposit of space dust, the moon has only been orbiting us for a few thousand years. Less than 10,000 year
-
COME ON,,, ALL OF YOU BACK YARD MECHANICS,,, Get some AC + DC motors together of the same voltage, and start building these GEM free energy power supplies,, + not only for 1.5, 3, 6, 9 + 12 volt batteries, but household 120 volt, + 12 volt, to powering these new electric cars. Let's throw the oil companies out of work, producing toxic smoke + maybe even make money with them, by throwing any excess power from these perpetually running energy generators that we have the time, + small amount of money to purchase parts to build. Think of it as not only keeping money in your pocket, but you are keeping money from the countries that either fund terrorist, or which are unknowingly funding them. This is not to mention the experimenting that we could be doing with the anti-gravity + speeds approaching light speed. Now I know that there are many out there like me, which would enjoy knowing how one type of this motor was powering a UFO in the Bible, in Ezekiel 1:16. http://aliensandghosts.yolasite.com/
-
Most people have heard that the "day + hour knoweth no man"-(Mat 24:36), but why does nobody mention the soon arriving doors that we are not only allowed to know, but in the original Greek, it is worded like a command = “know that it is near, even at the doors”,,, + that 1st Door will close on 2019.04 + the last Door will close on 2025.94. So we are guaranteed that Jesus will set His foot on the Mount of Olives before the year 2026.
-
Did you ever wonder how you could know that it’s near, if we can’t know the day. Near to what then, maybe it’s near to the door/deadline = "know that it is near, even at the doors" Mat 24:33. Doors are plural, because of the two appearances of Jesus, the first is in the clouds,(Rapture) http://rapturequestion.yolasite.com/ before the 7 year peace treaty is signed + then His second arrival is as His Foot touches earth, on the Mount of Olives. DOOR = (this is not the date of His Arrival, which we are warned that nobody can know, but this is the date that Christ must return before) A day that the Tribulation Saints will not only know, but they will probably being counting down the days until. = (He Returns when the 7 year peace treaty ends)
-
EVil-sOLUTION = isn’t it amazing what Truth can be revealed, when the “il-s” of life are included. http://decimationofthisevolutionfairytale.yolasite.com/
-
I can give you a free to run, perpetual power supply = http://free-energy.yolasite.com/ This GEM mechanism can do this because of how AC electricity is created by rotations. as in the more rotations the greater amount of AC electricity, and pulleys can be used to multiply rotations. So, you are using pulley mechanics to multiply your total amount of AC electricity, by trading one rotation of a large 100 cm circumference pulley, into 100 rotations of as many 1 cm circumference pulleys as you choose to add to the same belt. If you add AC generators to these mini-pulleys then you could be multiplying AC electricity. If you added 4 of these mini-pulleys with AC generators attached, you would gain 400 cycles of AC electricity, and all for the single burst of DC current, the minute amount of current that a DC motor takes to rotate one single time.
-
These mini-pulleys would be easy to rotate, as the only resistance that they would generate, would be caused by any power that they were generating. These mini-pulleys would only be winding up massive voltages, because the only current needed to rotate your large 100 cm pulley on a DC motor, is one simple spark, or short burst, the amount to rotate your large pulley only one single time. Torque is only caused when you are generating power, and power is generated by current multiplied by voltage. Since we only need one single spark of current, (practically zero) the total amount of power being generated would still be practically zero, costing practically zero torque.
-
This was given to mankind before the first door closes = http://my2020vision.yolasite.com/
Especially for the soon coming Tribulation Saints http://doorschristmustpassthrough.yolasite.com/ 
-
Sorry if it offends you, that I add a little bit of Biblical stuff in my explanations, but when I came up with this super simple idea, it was just after asking God for a way to help the Tribulation Saints. Just think about how super simple this AC electricity multiplier truly is, and how the voices in your head tell you that it cannot work. When how much more simple can it be, then to only pay for the one rotation of a large 100 cm pulley, when you can get a return of 100 cycle of AC electricity, for every 1 cm mini-pulley that you attach to the same belt, (with AC generators attached). Yes that’s an input of one single spark of DC current, returning you 100 cycles of AC electricity for every mini-pulley that you attach to the same belt. If you only added 4 mini-pulleys, you would get a return of 40 cycles of AC electricity. Please remember, that there is a most powerful spiritual warfare going on over this GEM technology.
-
There is a most powerful spiritual warfare going on over this GEM technology. Can you believe the problems that I have had, getting this super simple way of using pulleys to multiply the total amount of AC cycles of electricity? I think that it’s totally ridiculous, when you truly take a close look at it. Pulleys can be used to multiply the # of rotations, and AC electricity is made of rotations of a coil through a magnetic field. It should be dirt simple, as you are using pulleys to multiply your total # of rotations, and AC electricity is made of rotations, so you are effectively multiplying AC electricity. .


Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on August 26, 2017, 06:11:49 PM
TIME IS SHORT = the Pre-Trib Rapture + the infamous 7 year Peace Treaty with Israel MUST START before this 1ST DOOR closes on 2019.04 = Jan 14th http://my2020vision.yolasite.com/ - “know that it is near, even at the doors”,(Mat 24:33) http://doorschristmustpassthrough.yolasite.com/.
-
Free Energy + perpetual motion can be easily produced using pulleys, costing only the minuscule bit of power that it takes to rotate a DC motor with a large 100 cm circumference pulley one single time. You can gain or multiply massive amounts of AC electricity using mini-pulleys with AC generators. You are capable of doing this by running this long length of belt, (off the circumference of large pulley) past a few 1 cm circumference mini-pulleys, with AC generators attached. This GEM-(Geometrical Electricity Multiplier) device is gaining you 100 cycles of AC electricity, for every mini-pulley that you choose to attach to this sane belt. So, if you added 10 mini-pulleys, you could get a return of 1000=10X100 cycles of AC electricity, and all costing you only one mere spark of DC current. How could you not be multiplying AC electricity, when you are using simple pulley mechanics to trade one spark of DC current, for 100-1000 cycles of AC electricity-(duel sparks).
-
This super simple free energy technology: http://free-energy.yolasite.com/ works on the ability of combinations of pulleys being able to easily + freely multiply your total # of rotations. You can do this because of the fact that you don’t have to expend 100 times more electricity to rotate a large 100 cm circumference pulley, than it takes to rotate a 1 cm circumference mini-pulley. Yet if you run the 100 cm of moving belt, that comes off the one rotation of a large 100 cm pulley, past any # of mini-pulleys of 1 cm, then you could gain a return of 100 rotations for every mini-pulley that you choose to attach to the same belt. (As for torque, it only comes from generating power, and power is voltage multiplied by current) + We only need to produce one single spark of DC current to make this a self-powering mechanism. So one spark of DC current, (which is practically nothing) multiplied by even massive voltage, would still equal practically zero power, which takes practically zero torque to rotate.
-
This multiplication of rotations could be extremely helpful, if you only added AC generators to these mini-pulleys, you could be multiplying the total cycles of AC electricity. This AC generator takes no torque to rotate, because although it would be winding up massive voltage, it does not need to be winding up practically any current-(1 mere spark) which is practically zero. Torque is only caused when you are generating power, and you are generating practically zero power, as power is equal to voltage times current. So, no matter how massive of voltage you are generating, it is multiplied by practically zero current, as we only need one spark of current, or practically zero. This works because zero times anything is still equal to zero, and practically zero works the same way.
-
What is AC electricity, + how is it made = it is made out of the easy rotations of coils of wire through a magnetic field of two oppositely positioned magnets right. Using pulley technology, we can easily + freely convert one rotation of a large 100 cm circumference pulley, into 100 rotations of as many 1 cm circumference mini-pulleys that we choose to attach to the same belt that comes off of your large pulley. So, if you added 10 mini-pulleys to this same belt, and added AC generators to each mini-pulley, you could gain you 1000 = 100X10 cycles of AC electricity.
-
All these cycles of AC electricity are from the single burst of DC electricity, which is the small amount of current that a DC motor takes to rotate one single time =(one mere spark). These cycles of AC electricity would cost practically zero torque to rotate, as torque is only caused when you are generating power, and you are not generating practically any power in this system. This is because although you may be winding up massive voltage,(electrical pressure) to keep this GEM mechanism running, you only need to generate one single spark of DC current, and P=IV, or power equals current multiplied by voltage.
-
So your total power output would be practically zero current multiplied by any amount of voltage, which would still be equal to practically zero power, taking practically zero torque. So, you could be easily + freely generating massive amounts of rotations of these mini-pulleys, which are generating you massive voltage, or the ability/potential to gain plenty of current, which will allow you to produce plenty of power. This is because the greater the voltage/pressure, the greater the ease that there is to generate more current. PLEASE,,, let me show you how ridiculous this mythical torque problem really is. Do you think that the 100 cycles of AC electricity would have a hard time producing the single spark of DC current, which is all that you need to crank over your DC motor once, with your 100 cm circumference pulley attached?
-
Mankind was given the best Gift from God, (other than Jesus) http://free-energy.yolasite.com/ right here in Atlantic Canada + just before the infamous 7 years Peace Treaty. This seven years of time, which the 2nd half of is the Great Tribulation, is when this GEM tech will be needed most. This will be the worst time for earth, where not only is there constant war, but most all of the evil fallen angels, and the Nephilum , will be sent to the earth. Nephilum are the offspring of fallen angels + human women, as angels are all male, because God only wanted there to be a set # of angels. This is not only the ones that are still alive, but also the spirits of all that have died. This could be massive amounts of evil spirits, considering that this includes the ones from before the flood. (How can we be billions of years old, when the moon will leave orbit within 10,000 years) + all orbiting bodies will have messed up orbits, because of this yearly amount of space debris adding mass.
-
This is free energy technology, which we all will need and love, as it has practically no cost to run, and there is no need for any fuel to be purchased. Nor would there be any exhaust to cause environmental or noise pollution. So,,, why haven’t we figured this simple little bit of technology out long ago? Evil spirits are, and have been hiding this simple technology from mankind. These AC generators are extremely easy to rotate, because the only resistance torque,(other than the viscosity of the lubricant in the bearings) would come from a great need for current, which would practically never happen, especially when you are dealing with such small amounts of power as the example that I describe here.
-
I confirmed that this free energy technology, discovered in the early 2000’s, was from God + not from evil forces, by finding it in a UFO motor description in Ezekiel 1:16. Thankfully, there are many ways that we can freely multiply the total # of rotations, like a set of varied sized pulleys, can be easily used to multiply the total # of rotations. Then, by simply adding an AC generator to your mini-pulley, you can convert your rotations into cycles of AC electricity.
-
This is one super simple GEM of an idea, and it is made from pre-school technology, so why was this not out long ago. Can you believe the power that evil spirits have, to be able to dumb down a whole population of humans + for so long. I still have problems getting people to believe that there is no torque problem. Think that this may actually be a good enough reason for you to find out if GOD IS REAL = http://beliefstoliveby.yolasite.com/ + if HE IS RETURNING SOON = http://my2020vision.yolasite.com/
-
Do you want to hear how truly super simple this technology is, Where you only pay to crank over the DC motor one time, with a 100 cm circumference pulley, Then you use the 100 cm of moving belt off this large pulley circumference, + run it past one or more mini-pulleys of only one centimeter circumferences, All that you have to do is add an AC generator to these mini-pulleys, giving you a free return of 100’s of cycles of AC electricity. That’s one small pulse of DC current as an input, returning you 100 cycles of AC electricity output, How can you not multiply your AC electricity, with this rotation multiplication technology
-
IT IS TRULLY THAT SIMPLE
-
Come on Canadians,,,
Come on Nova Scotia,,,
-
This is where this GEM-(Geometrical Electricity Multiplier) technology of free energy for the End Times was 1st started, (early 2000’s when He first shared this with me). Let's get out there and start taking advantage of it, by not only building GEM units to power all of our electric tools, toys + gadgets, but we could be starting companies that have electric appliances, utensils, devices, tools, toys, + gadgets with these GEM perpetual power supplies built into them, (let’s start letting electricity generate itself) + on our labels we could even proudly say "FIGHTING TERRORISM + FIGHTING POLLUTION"
Title: Re: Using geometry to multiply rotations = multiplying AC electricity
Post by: that_prophet on August 26, 2017, 06:13:41 PM
PROOF OF CREATION + A YOUNG EARTH = (space dust) has mass + billions of years of dust would add up eventually + mess up the orbits of all planets + moons. We could measure the amount of dust on the moon, and divide the total by the amount of dust that is deposited every year, coming up with an age for the moon, and thereby finding out the age of our earth. Most of us have seen pictures of the moon landing, and realize that there is only a few centimeters, meaning that by the deposit of space dust, the moon has only been orbiting us for a few thousand years. Less than 10,000 year
-
COME ON,,, ALL OF YOU BACK YARD MECHANICS,,, Get some AC + DC motors together of the same voltage, and start building these GEM free energy power supplies,, + not only for 1.5, 3, 6, 9 + 12 volt batteries, but household 120 volt, + 12 volt, to powering these new electric cars. Let's throw the oil companies out of work, producing toxic smoke + maybe even make money with them, by throwing any excess power from these perpetually running energy generators that we have the time, + small amount of money to purchase parts to build. Think of it as not only keeping money in your pocket, but you are keeping money from the countries that either fund terrorist, or which are unknowingly funding them. This is not to mention the experimenting that we could be doing with the anti-gravity + speeds approaching light speed. Now I know that there are many out there like me, which would enjoy knowing how one type of this motor was powering a UFO in the Bible, in Ezekiel 1:16. http://aliensandghosts.yolasite.com/
-
Most people have heard that the "day + hour knoweth no man"-(Mat 24:36), but why does nobody mention the soon arriving doors that we are not only allowed to know, but in the original Greek, it is worded like a command = “know that it is near, even at the doors”,,, + that 1st Door will close on 2019.04 + the last Door will close on 2025.94. So we are guaranteed that Jesus will set His foot on the Mount of Olives before the year 2026.
-
Did you ever wonder how you could know that it’s near, if we can’t know the day. Near to what then, maybe it’s near to the door/deadline = "know that it is near, even at the doors" Mat 24:33. Doors are plural, because of the two appearances of Jesus, the first is in the clouds,(Rapture) http://rapturequestion.yolasite.com/ before the 7 year peace treaty is signed + then His second arrival is as His Foot touches earth, on the Mount of Olives. DOOR = (this is not the date of His Arrival, which we are warned that nobody can know, but this is the date that Christ must return before) A day that the Tribulation Saints will not only know, but they will probably being counting down the days until. = (He Returns when the 7 year peace treaty ends)
-
EVil-sOLUTION = isn’t it amazing what Truth can be revealed, when the “il-s” of life are included. http://decimationofthisevolutionfairytale.yolasite.com/
-
I can give you a free to run, perpetual power supply = http://free-energy.yolasite.com/ This GEM mechanism can do this because of how AC electricity is created by rotations. as in the more rotations the greater amount of AC electricity, and pulleys can be used to multiply rotations. So, you are using pulley mechanics to multiply your total amount of AC electricity, by trading one rotation of a large 100 cm circumference pulley, into 100 rotations of as many 1 cm circumference pulleys as you choose to add to the same belt. If you add AC generators to these mini-pulleys then you could be multiplying AC electricity. If you added 4 of these mini-pulleys with AC generators attached, you would gain 400 cycles of AC electricity, and all for the single burst of DC current, the minute amount of current that a DC motor takes to rotate one single time.
-
These mini-pulleys would be easy to rotate, as the only resistance that they would generate, would be caused by any power that they were generating. These mini-pulleys would only be winding up massive voltages, because the only current needed to rotate your large 100 cm pulley on a DC motor, is one simple spark, or short burst, the amount to rotate your large pulley only one single time. Torque is only caused when you are generating power, and power is generated by current multiplied by voltage. Since we only need one single spark of current, (practically zero) the total amount of power being generated would still be practically zero, costing practically zero torque.
-
This was given to mankind before the first door closes = http://my2020vision.yolasite.com/
Especially for the soon coming Tribulation Saints http://doorschristmustpassthrough.yolasite.com/ 
-
Sorry if it offends you, that I add a little bit of Biblical stuff in my explanations, but when I came up with this super simple idea, it was just after asking God for a way to help the Tribulation Saints. Just think about how super simple this AC electricity multiplier truly is, and how the voices in your head tell you that it cannot work. When how much more simple can it be, then to only pay for the one rotation of a large 100 cm pulley, when you can get a return of 100 cycle of AC electricity, for every 1 cm mini-pulley that you attach to the same belt, (with AC generators attached). Yes that’s an input of one single spark of DC current, returning you 100 cycles of AC electricity for every mini-pulley that you attach to the same belt. If you only added 4 mini-pulleys, you would get a return of 40 cycles of AC electricity. Please remember, that there is a most powerful spiritual warfare going on over this GEM technology.
-
There is a most powerful spiritual warfare going on over this GEM technology. Can you believe the problems that I have had, getting this super simple way of using pulleys to multiply the total amount of AC cycles of electricity? I think that it’s totally ridiculous, when you truly take a close look at it. Pulleys can be used to multiply the # of rotations, and AC electricity is made of rotations of a coil through a magnetic field. It should be dirt simple, as you are using pulleys to multiply your total # of rotations, and AC electricity is made of rotations, so you are effectively multiplying AC electricity. .