Awesome work Luc!   Do you think having only 2 cores may add to the vibration?   Maybe 4 or more will smooth out the effect although I realize with your setup that would be difficult to do.   Might be a thought to get some heavy concrete blocks to put on top of and around your box (fairly cheap from the big hardware stores).   Thanks for confirming there is something of real interest here!

 Yup that could be it as well. Another half of the system that could be used to balance the system is missing in your experiment Luc. Good call e2matrix...

Hi everyone,

as I have posted a few pages back, I've been testing the effects of the QEG.
It coincides (like woopy) I have also thought of using a MOT for its high Inductance coil to see if I can produce some of the effects claimed.
I can confirm that there is a real effects and I would strongly suggest to the naysayers to hold off on your critics as you may end up having to eat your words. Best to put your energy in experiments as this looks to have real potential.

I made a video demo of my setup so you can see that I'm not just talking. However, I did not feel comfortable to demonstrate the Resonance as my particular test setup may not be able to handle such vibrations. When it first happened it scared me and I quickly pulled the plug as my 100 pound safety box was vibrating like a jackhammer.

Of course I'll be doing more tests but I thought to share my test rig and basic findings.

Link to video: https://www.youtube.com/watch?v=NLiZDQxywqE

Stay tuned for more

Luc

Great job Luc. Looking forward to more of your sensible and 'walk the talk' analysis and results. Many people here can and should learn from you. There are too many know it all people who writes crap most of the time.
I know Tim Trapp is real about his faith and knows what he knows but his business sense may not be as sharp as his technical knowledge.


ChrisC

Look. Here's the logic behind self-looping with no outside power source.

Measurements made on many different FE devices indicate more power output than input. Great! We've all seen these devices in many different forms in many different YouTube videos, some more plausible than others. Not one _plausible_ and confirmed case of self-looping has happened, though. (I know some of you disagree with this; the problem of explaining Big Oil and Fracking is left to you folks then.)

So, many people believe that the measurements that indicated those big power outputs are somehow flawed. Especially since many of the claims are of such great powers that even the inefficiencies of standard generators or inverters would be easily overcome, to make a net excess power output.

There is one _sure_ measurement that can be made, though: Self-looping. If a "free energy" device produces a _claimed_ power output in excess of the simple losses in a generator or inverter.... but can't be made to self-loop, there is no doubt about it: the measurements of excess power are flawed and there just isn't any.
The electrical power output is weird in some way, longitudinal scalar vortex funnels or something? The mechanical power output is in the form of chaotic pendulum swings and chains of floats in mercury? No problem, really ..... making the input-output interface, even for such difficult forms of output, is "just engineering" and can be solved. IF, that is, there is really excess power in the first place.

In the QEG, whether from Thrapp or Robitaille..... there isn't. You won't see it self-looping, that's for sure, and you won't see any genuine sustained power output that's greater than the power input to the drive motor and "resonant" coils. You will, however, see a lot of money changing hands, and you'll see WhateverGirl and her minions getting a lot of free vacation time.

And here's the kicker: other than "self-looping", there is NOTHING about any of these devices that is contrary to well-known physics principles! That makes them uninteresting UNLESS they can be self-looped!

Luk - great idea!


Finally someone who wants to take a step of faith.


There can be no progress by sitting back and throwing stones.


I just have to say Luk, what is going to happen is that once you get some more power running through your coils and transformer cores become more magnetized momentarily during each cycle it is going to start grabbing harder and this is where all the incredible vibration you spoke of must be coming from considering the tremendous torque of that motor you are using. If don't keep the power levels exactly the same in each core they may start touching down and it will be like disc breaks. I can see why it might get quite frightening. For safety sake I would not necessarily recommend pushing this particular design much further.


I was thinking about something Timothy mentioned... there was no fly wheel and the relatively small rotor was coupled via a belt.


I believe his configuration was chosen for that very reason, to provide give to the grab.


The belt provides additional "capacitance" due to its elasticity.


This results in a physical energy store and release cycle between the belt and drive motor that will have its own resonate points.


So they have two energy store and release systems each with their own resonant points.


I believe the trick is to synchronize the two resonant systems to feed back on each other.


Food for thought.


Thanks!

Hi shinz62,

You are correct!  my design becomes a disk brake at Resonance.

I like your understanding of the possible use and work of the belt. I'll incorporate it in the next design.

Thanks for sharing

Luc

Hi everyone,

I was out most of the day but had a chance to further test and video what happens when it hits resonance.

Please note, once I finished this test video the two rotor set screws had worked them self loose with the powerful vibrations.

I don't think I can go any further with this tests device as my design was mostly to confirm the effect Inductance parametric change have and confirm the effects that have been shared. My design becomes a disk brake at Resonance because the powerful vibrations flexes the rotor and the cores rub together, so I can't confirm how it affect the prime mover at Resonance.
I know that's the big question but I ask myself, why would it not be as they say since all the other effects are as shared.

Link to video: https://www.youtube.com/watch?v=-_CN6aE2meY

Luc

Hi everyone,

I was out most of the day but had a chance to further test and video what happens when it hits resonance.

Please note, once I finished this test video the two rotor set screws had worked them self loose with the powerful vibrations.

I don't think I can go any further with this tests device as my design was mostly to confirm the effect Inductance parametric change have and confirm the effects that have been shared. My design becomes a disk brake at Resonance because the powerful vibrations flexes the rotor and the cores rub together, so I can't confirm how it affect the prime mover at Resonance.
I know that's the big question but I ask myself, why would it not be as they say since all the other effects are as shared.

Link to video: https://www.youtube.com/watch?v=-_CN6aE2meY

Luc

Hey Luc

You are a MAD MAN!!        Great build.     I think the movie was "Seven"    "Whats in the booox?"  just kidding. Looked at your previous vid after this one.

So the output is just from the rotation of the top(removed from ecore) passing the larger part of the transformer at a particular freq(speed)?  Could there be some residual magnetism in the core?

Mags