Free Energy | searching for free energy and discussing free energy
Solid States Devices => Tesla Technologgy => Topic started by: jbignes5 on October 03, 2013, 04:19:57 AM
-
Stivep1 please join me in discussing the newest video from Akula and your interpretation of that video.
http://www.youtube.com/watch?v=wuoISZAlFAc
There is a lot to discuss about the similarities between Tesla's devices and someone who actually is using his methods (akula, TK and a few others).
Lets start by showing the two devices as shown by Tesla.
The transmitting device is upper left of the picture. The receivers are either double connected or single connection with a capacitive secondary connection to the ground. I also think that the ground is actually a capacitive connection when compared to the transmitter as well. But in my honest opinion I can see how that can be fixed by using an appropriate capacitor across the receiver coil as well. The receiver coil is actually a diode in a sense. It resists changes in it's field once they are established and adding iron or ferrite would also increase this resistance to change. But what would happen if the establishing field was external to the receiver coil?
I also think that if the capacitor was built into the coil itself like a bifilar coil not connected that the capacitance would be built into the coil itself and the ends of the coils could be used to extract usable energy from the receiver setup from the mono impulse electric field the transmitter was supplying. Remember my ideas about the cap coil?
Stivep1 this is a very simplified version and very workable version in my opinion. Actually this is my direction atm. What do you think?
Reference: http://www.tfcbooks.com/tesla/1919-05-00.htm
-
Jbigness5
It appears Our Friend Grumage has been busy with this
https://www.youtube.com/watch?v=X1Kv_ciCzQo (https://www.youtube.com/watch?v=X1Kv_ciCzQo)
Duncan has this Here
http://www.energeticforum.com/renewable-energy/14469-another-tks-apprentice-what-do-we-make-attempt.html#post240695 (http://www.energeticforum.com/renewable-energy/14469-another-tks-apprentice-what-do-we-make-attempt.html#post240695)
Thx
Chet
-
Thanks for the links. I have seen them before.
The one problem I see is this. Over complication of a very simple system. Using rf is another issue that has to be addressed. I do not think that RF should be used in these systems. It should be the Impulse power that Tesla discovered. The RF nets you more complications and added circuitry to convert the RF into usable power instead of the simplistic approach that Tesla used.
I also believe this is done on purpose to keep it complicated.
The simple fact is that voltage fields are responsible for generating inductive responses in coils. Also if anyone hasn't made the connection yet look at the orientation Tesla uses between the transmitter and receiver. This is because the impulse fields are radiative, going out from the source. This is shown in this example: pictured below.
-
Because those are radiant fields, that is, that they radiate all around, they are not a good source of RF, HF, or HV to be having spewing waves all around in ones house. Especially only a few yards from Tv, radio, Pc and other sensitive devices that are affected by this type of interference. Look at the size of the spark gap, over one inch. I can smell the ozone coming off of it, from here. If he were to turn on his Tv, while the device is running, (he mentions that the secondary coil can pick up the output from the primary, even a kilometer away). LOL! So, what do you think that the Tv would look like, if he did turn on his Tv?
So, the solution is not an easy one, yet.
I also feel that this last Akula device is meant to distract us, more than to really show us how to make free energy. His first device had as much power output, and was much less complicated, and cheaper to replicate.
Hopefully his explanation of the mode of operation is correct, but somehow even that I doubt.
The device also needs a field test run, by impartial members, away from all power sources, including possible batteries, which can be powering induction oscillators and such from inside the house, or hidden nearby.
A proper schematic showing all component values, working diagrams (not scribbles), and a ground connection that is really not attached to anything, other than the outside earth ground, would be what is really needed.
So, That, Wesley and All, is what I think... Thanks for taking the time to do the various translations, much appreciated.
NickZ
-
NickZ
Fully agree, don't get distracted.....
-
Yes Nick, agreed - totally unsuitable as a basis for domestic electricity distribution.
-
Well,
As for an unsuitable power source lets look at the three kinds together.
AC is very dirty and is a cause of many documented bad effects on humans. And that is just in your house. Lets look at the Iron men version and the effects of Higher voltage AC on humans that lived under and around those Iron men..... Really when you start to look at AC it gets very bad.
RF is extremely dangerous to all living beings around the towers. Who knows what long term low levels can do to you. Right now they are correlating the health effects of phone RF on the human brain and the formations of tumors and other health effects. AS well as interference that an improperly tuned or designed RF unit can cause.
Impulse technology as told by Tesla doesn't have these problems or nearly as many. The fix for this is to have the transmitter and receiver away from the point of usage. Remember Akula had both right next to each other and Tesla showed this as well from the examples I gave above.
In fact Tesla reported a properly tuned system of the proper impulses per second 2000+ is quite beneficial to the human condition. A feeling of well being and an ability to work for days non stop was reported. He even slept in the field and he said that it was very invigorating but strangely addicting.
I would also like to reiterate the differences of two distinct systems. The Akula device uses an unclean impulse technology. It is most like RF and is not true impulse technology. Real impulse technology is truely one way impulses. The real impulses of Tesla energized then relaxed and cycled through that. I am betting this akula device energizes in both directions and that is not true impulses.
Stivep1 also mentions something very weird in the translation about the speed of the sparkgap. Tesla was reporting cycles in the range of 1 million per second and higher, stive says 200,000 or so could be gotten from a spark gap. Lets look at the magnetically shunted spark gap and I'm sure the Tesla report of millions of cycles is very true.
There is nothing wrong with this system for domestic power. If there is a range of interference atm it is because we know little about true shielding of this radiant event and yes it can be shielded if the power level is not extreme. That shielding must not be grounded as well.
If we look at the second picture I have shown above we will see the flow that gets created from the earth energy. The energy is sucked up through the coil and exits the top capacitance to flow back down to the earth. We are looking at a pump. Once the flow is created the "receiver" utilizes the return energy like a generator uses the flow of water to generate from. The character of the energy returning twords the earth keeps the impulse character and that is used to create a flow from the receiving coil within the fountain like spray of the earth energy pump. Nothing says these units need to be the size of the planned Tesla Tower. They can be all sizes from tiny to larger versions.
As usual the usual suspects come to impart their wisdom without knowing anything about the process that is involved here. Statements like unsuitable for domestic distribution are unfounded and quite frankly ignorant of anything about these processes. My statement of ignorance about this process is a fact and not am insult.
In a month I will be in my new house and I will be starting my lab up soon to prove all the nay sayers wrong. Akula has shown there is a validity to the process and we need to correct the problems with his system to bring it under control. One problem I see is the impurity of the spark gap, which is adding wide band interference from the transmitter. Adding a magnetic shunt to the gap should clean this up and turn the impulses into clean impulses.
-
Stivep1 please join me in discussing the newest video from Akula and your interpretation of that video.
http://www.youtube.com/watch?v=wuoISZAlFAc
There is a lot to discuss about the similarities between Tesla's devices and someone who actually is using his methods (akula, TK and a few others).
Lets start by showing the two devices as shown by Tesla.
The transmitting device is upper left of the picture. The receivers are either double connected or single connection with a capacitive secondary connection to the ground. I also think that the ground is actually a capacitive connection when compared to the transmitter as well. But in my honest opinion I can see how that can be fixed by using an appropriate capacitor across the receiver coil as well. The receiver coil is actually a diode in a sense. It resists changes in it's field once they are established and adding iron or ferrite would also increase this resistance to change. But what would happen if the establishing field was external to the receiver coil?
I also think that if the capacitor was built into the coil itself like a bifilar coil not connected that the capacitance would be built into the coil itself and the ends of the coils could be used to extract usable energy from the receiver setup from the mono impulse electric field the transmitter was supplying. Remember my ideas about the cap coil?
Stivep1 this is a very simplified version and very workable version in my opinion. Actually this is my direction atm. What do you think?
Reference: http://www.tfcbooks.com/tesla/1919-05-00.htm
-
author=jbignes5 link=topic=13863.msg372494#msg372494 date=1380894632
As for an unsuitable power source lets look at the three kinds together.
Stivep1 also mentions something very weird in the translation about the speed of the sparkgap. Tesla was reporting cycles in the range of 1 million per second and higher, stive says 200,000 or so could be gotten from a spark gap. Lets look at the magnetically shunted spark gap and I'm sure the Tesla report of millions of cycles is very true.
Well
the higher the frequency of the spark the more continuous plasma is flowing at certain frequency difference between low of the pick and high of the pick is barely noticeable.
200khz sounds about right.
The higher the frequency the spectrum of impurities ( harmonics of all sort) occupies upper( higher) part of spectrum.
I could bet that Akula device does not go higher than that.
Try to listen to my addition to translation in my video
http://www.youtube.com/watch?v=wuoISZAlFAc (http://www.youtube.com/watch?v=wuoISZAlFAc)
And find part:
14:43 and drown schematic out of my words
at this par of explanation I was trying to explain principals of operation with the approach as if there was no famous yoke but regular ferrite based yokes to stop impulse to be transferred from the other side of it.
I'm not authorized at this time to go deeper into it as I went till now.
Please understand that I' will never be corrupted and I will never advance myself if I'm being hold accountable.
That is why people comes to me with their secrets as well.
If there is no objection than information is posted to the public or if the party that is requesting certain behavior is no longer credible in general rules of humanity we have been born with than my obligation is no longer hold.
So what are the exemptions:
If there situation pushing One to change himself, say someone demands from One under the threat that "One is a dog"
- He will admit " Yes that dog I'm." :)
there is nothing wrong ,to give something only because one is threatened.[/size]
At the end there is no[/size]
more "Spanish inquisition"- it died soon after that , because of One who did not die at the first place.
I think this is clear.
So if for any reason you might listen to some strange statements of mine you know- that all.
So far there is no need for that :)
It did not happened yet.
There is nothing wrong with this system for domestic power. If there is a range of interference and it is because we know little about true shielding of this radiant event and yes it can be shielded if the power level is not extreme. That shielding must not be grounded as well.
Yes
If we look at the second picture I have shown above we will see the flow that gets created from the earth energy. The energy is sucked up through the coil and exits the top capacitance to flow back down to the earth. We are looking at a pump. Once the flow is created the "receiver" utilizes the return energy like a generator uses the flow of water to generate from. The character of the energy returning twords the earth keeps the impulse character and that is used to create a flow from the receiving coil within the fountain like spray of the earth energy pump. Nothing says these units need to be the size of the planned Tesla Tower. They can be all sizes from tiny to larger versions.
yes that is present understanding of the phenomena.
As usual the usual suspects come to impart their wisdom without knowing anything about the process that is involved here. Statements like unsuitable for domestic distribution are unfounded and quite frankly ignorant of anything about these processes. My statement of ignorance about this process is a fact and not am insult.
agree 100%
blood suckers will gets what they deserve to get.
In a month I will be in my new house and I will be starting my lab up soon to prove all the nay sayers wrong. Akula has shown there is a validity to the process and we need to correct the problems with his system to bring it under control. One problem I see is the impurity of the spark gap, which is adding wide band interference from the transmitter. Adding a magnetic shunt to the gap should clean this up and turn the impulses into clean impulses.
interesting approach, another one will be to create electronic square wave equivalent of spark gap and work with it trying inject it right before the very top of the impulse is being reached.
As I not necessarily agree with Akula standing that that impulse should be given at the dying part of the impulse.
I also do not see our hero being so good for us to say something at all.He is young, and misleading if there is in his direct interest. inconsistent in his statements, adjusting himself to changes of situation , trying to learn how the system work, - he has it but he has no explanation for what he got from it.
He is improvising.
The pump phenomena - part of his explanation is about right.
I see it as good explanation for the present time as we do not have anything on hand.
But also famous yoke..............
somehow omitted in all of his talk and still present in the device.
Think guys
In first video:
-he said that he had to change yoke ferrite because previous one did not work.
Well
Lithuania experiment did not have problem, with yoke as major energy extraction element.
Another possible explanation is that purpose of choke is to stop impulse to go to the other side of it.
So if we say that that yoke is used only as (primary function) choke than why it has 3 winds on it? ??? ??
it should be one..............
So what is that he wants? :
He needs certain credibility to attract investors if any.
So he needs public approval.
Is that wrong?
NO it is not
Who gives anything for free.........................to anyone.......... who?
It is only Wesley and Arunas and Tiger and few more ........ idiots?......... maybe not so..................
Are they so good for you guys..............so human?............ so stupid?...................
So if you listen to them they say :
No they are not..................
They have no choice as well. They know that giving is to humanity is the only way to make money on it as well.
That is why they stand that energy belongs to humanity all bad and good at no distinction .
You start firs you sold 1000 devices in one day, so is other guys as well..
What's wrong with that.
there are 6.8 billion peoples in the planet earth. Who cares about competition.
What is really that you need to be happy.
House, no debts, and some little money for comfortable tomorrow . That is all.
If you guys think different than you are not in my coffee table.
And your thinking is not my cup of tea
GOT IT?
Wesley
-
Competition to what ? BE serious. Take a few meters of wire few simple parts, car battery and the genious of Kapanadze and you got 5-10 kW . Costs you a few bucks really...if you know what Tariel knows. The problem is sophisticaed because of nature of human. We likes to complicate and the more complicated the more it is attractive and precious while it is really a crap, while a thing looking like crap is usable...
-
Stivep,
Let me be perfectly clear I have no issues with you my friend. I know it may have sounded like that but that is not the case.
I wanted to open a dialogue with you about this to finally nit out the whole system. To get it out in the open.
I know you have been working on another theory but I think someone has thrown you a great distraction at the perfect time. Going the way you went or is currently going is distracting you from the real power behind this system. Yes resonance has something to do with it but it isn't nuclear resonance. It is a whole system resonance which includes the Earth as well. Didn't you ever wonder why Tesla knew the exact capacity of the earth? There was a reason why and it has to do with the resonance between the earth and the ionosphere. Since the system includes the earth and to a certain extent the atmosphere these things need to be known for the simple fact that he knew that a resonance will pass over a circuit or component like it wasn't there at all. With a whole system approach that includes all of the components like the earth one can pass over any component like it wasn't there and that even means the atmosphere.
One thing that needs to be focused on is not getting distracted from the projects that show Tesla's work. He, Tesla, knew without a shadow of a doubt that this system was and is the answer. The problem is weather we will be here to experiment any more.
*deleted comment about Fukushima...*
-
Stivep,
Let me be perfectly clear I have no issues with you my friend. I know it may have sounded like that but that is not the case.
I wanted to open a dialogue with you about this to finally nit out the whole system. To get it out in the open.
I know you have been working on another theory but I think someone has thrown you a great distraction at the perfect time. Going the way you went or is currently going is distracting you from the real power behind this system. Yes resonance has something to do with it but it isn't nuclear resonance. It is a whole system resonance which includes the Earth as well. Didn't you ever wonder why Tesla knew the exact capacity of the earth? There was a reason why and it has to do with the resonance between the earth and the ionosphere. Since the system includes the earth and to a certain extent the atmosphere these things need to be known for the simple fact that he knew that a resonance will pass over a circuit or component like it wasn't there at all. With a whole system approach that includes all of the components like the earth one can pass over any component like it wasn't there and that even means the atmosphere.
One thing that needs to be focused on is not getting distracted from the projects that show Tesla's work. He, Tesla, knew without a shadow of a doubt that this system was and is the answer. The problem is weather we will be here to experiment any more.
*deleted comment about Fukushima...*
I'm obligated to work on Colman, I invested a lot in to it.
I'm not excluding other technologies but I admit I'm preoccupied with Colman.
Actually with electron microscope to bring it to life as that was a gift of heart.
I finished work with Vacuum chamber - Bell Jar also gift from another man.this one is absolutely ready fort any vacuum experiment. But I need more connectors.
Feedthrough Double Ended BNC Connector, 10-Pin Feedthrough and so on.
I will try to help to this topic as much as I can
Wesley
-
I am so envious of you atm. I remember the gifting as I saw the video. What a powerful gift. I wish I had it with the crystal batteries I was working on, I bet it would have proved a thing or two that I was saying about the structure of crystals I was seeing in my experiments.
The nmr experiment is good but let me ask you a question. One that I know was brought up before. The Geiger counters work on ionizing gas. Well what happens next to a Tesla coil? Would this ionization of a florescent tube be the exact same thing? Has anyone used a Geiger counter next to a Tesla coil? I'm betting it will go off just like being exposed to a high radiation source. I'm thinking you are seeing the voltage field and not true radiation like your looking for.
Besides getting hits on the Geiger counter what tells you it is radiation like you are looking for?
As for my planned experiments with the Tesla coil and receiver I have quite a lot of work to do before getting under way. First is the move to a new house. Next will be getting the lab area setup and properly shielded. and then I will be starting to focus on the simple experiments first that Tesla shows us and that I have shown previously in this thread.
Akula did so something right and that was to go back to Tesla and figure out what he did. No matter if he just got lucky or what doesn't matter. It doesn't matter if Akula knows how it works at this point. The only thing that matters to a real extent is that he is getting results. I will be more then happy to recreate the Tesla experiments to prove it and to figure out the means of which it operates.
But like I posted before we might not have a long time to figure this out. Fukushima is getting worse and the company that is handling the results of the meltdowns is in rough shape. They haven't a clue what they are doing and are doing what they are doing in a hap hazard way. I fear we are not being told the whole truth and real radiation is gonna be our biggest worry. Some of the materials have a shelf life of 1.7 million years and would be extremely hard to clean up once in the pacific ocean. I think we are heading for a major disaster worse then the original event.
-
Excuse me for butting in... just wanted to say that this has been a very interesting chat.
You all have good ideas, towards forwarding this to new levels, possibly even not contemplated by Tesla himself.
If we all put our heads together on this, we'll be able to figure it out. Maybe Kapanadze or Akula, Barbosa, or others, would like to help out. Maybe not. I know that Igor Moroz is hot on the track. And is telling and showing all. So, in time we'll see the Light, one way or another.
I'm one of those that will not easily give up on this, against all odds.
Even though we may have different opinions, at times, and may not see eye to eye on everything, we all want the same thing, in the end.
Free energy for yourselves, and others as well.
NickZ
-
System of reception of energy from a surrounding medium.
For reception of energy from a surrounding medium it is necessary to create system in
Conformity with the stated theoretical concept for making of process,
Proceeding according to the equations 1 and 2.
The main device of system is a generator of a primary impulse divU0. In quality
Impulse it is necessary to create very powerful impulse of magnet field with steep leading edges
(Similarly δ - functions). Feature of an impulse with the steep leading edges, similar δ -
Functions in that at decomposition of such signal in a harmonic series Fourier
The perpetual number of harmonics is gained. Each harmonic is a constituent
Hologrammes of structure and it is simultaneous - one of the perpetual variants of development
Structures. The structure to which the magnetic impulse divU0 gets, will begin
To resound on frequencies of eigentones, and therefore such resonance will be
To create the harmonious signal which will be a constituent volume
Projections of the hologramme of structure. Structurally, as the generator primary
Impulse it is necessary to use the reel from several coils of a thick wire, and
The reel should be in-series to the discharger - to the nonlinear component,
Creating a powerful current pulse with very steep leading edges. Also it is collateral
To the reel and the discharger the condenser, for accumulation of an electric charge and formation of a powerful current pulse should be included. All contour of the generator should be fed by a constant voltage 10000 - 20000 Century
The second integral device of system are resonators - them should be
Necessarily a little. Each resonator includes the reel having
Considerably большее number of coils, than the reel of the generator-shaper primary
Impulse and with more thin wire. One extremity of such reel is earthed, and another -
Remains to free. As a whole each resonator is the system consisting of the reel and
"Parasitic capacity" - containers between the free extremity of the reel and the earth. Through this
"Stray" container so-called "displacement currents" will proceed. The resonator is
The system inductance-capacity, it represents an oscillating circuit, which
Will resound on frequency of eigentones and it is essential to strengthen
Oscillations from a primary impulse divU. Frequencies of eigentones of resonators
Should be certainly multiple each other to provide “an enclosure
Waves ”. Resonators should settle down in pairs in each of three mutually
Orthogonal planes. In each pair at the first resonator frequency of the natural
Oscillations should be f1, and at the second resonator - f2, and the relation of these frequencies
Should yield an integer. Each pair of resonators will create modulated on
To amplitude oscillations with a carrier frequency f1 and modulation frequency f2 (drawing 1 see)
Drawing 1 - the Vortex, as sruktura-attraktor at which the exterior surface has
The plus curvature, and an interior surface - the negative curvature.
Drawing 2 - the Projection of the hologramme created by a pair of resonators
Resonators with identical frequencies of eigentones f1 or f2,
Located in different orthogonal planes should have phase shiftings 90 °
In coordination working resonators, that is when waves of each resonator
Are harmoniously enclosed each other, and disposed orthogonally from each other
Will shape hologramme projections (drawing 2). Each projection will be
To develop with other orthogonal projections and as a whole, generated
The volume hologramme finally forms structure (drawing 1).
The created structure will be similar to a globular lightning or a mega-electron. This
The structure will start to grow in volume, at each new impulse to involve
(поляризовывать) all new and new volumes of universal medium. Thus energy on structure formation will undertake from environmental universal medium. To remove energy it will be necessary by its pumping out from the generated structure.
Thanks to that in the generator of a primary impulse divU0 there is a discharger,
Which clears after impulse passage, energy from resonators will not be
To leave revertively in the reel of the pulser at the expense of a common reactance of reels.
-
System of reception of energy from a surrounding medium.
For reception of energy from a surrounding medium it is necessary to create system in
Conformity with the stated theoretical concept for making of process,
Proceeding according to the equations 1 and 2.
The main device of system is a generator of a primary impulse divU0. In quality
Impulse it is necessary to create very powerful impulse of magnet field with steep leading edges
(Similarly δ - functions). Feature of an impulse with the steep leading edges, similar δ -
Functions in that at decomposition of such signal in a harmonic series Fourier
The perpetual number of harmonics is gained. Each harmonic is a constituent
Hologrammes of structure and it is simultaneous - one of the perpetual variants of development
Structures. The structure to which the magnetic impulse divU0 gets, will begin
To resound on frequencies of eigentones, and therefore such resonance will be
To create the harmonious signal which will be a constituent volume
Projections of the hologramme of structure. Structurally, as the generator primary
Impulse it is necessary to use the reel from several coils of a thick wire, and
The reel should be in-series to the discharger - to the nonlinear component,
Creating a powerful current pulse with very steep leading edges. Also it is collateral
To the reel and the discharger the condenser, for accumulation of an electric charge and formation of a powerful current pulse should be included. All contour of the generator should be fed by a constant voltage 10000 - 20000 Century
The second integral device of system are resonators - them should be
Necessarily a little. Each resonator includes the reel having
Considerably большее number of coils, than the reel of the generator-shaper primary
Impulse and with more thin wire. One extremity of such reel is earthed, and another -
Remains to free. As a whole each resonator is the system consisting of the reel and
"Parasitic capacity" - containers between the free extremity of the reel and the earth. Through this
"Stray" container so-called "displacement currents" will proceed. The resonator is
The system inductance-capacity, it represents an oscillating circuit, which
Will resound on frequency of eigentones and it is essential to strengthen
Oscillations from a primary impulse divU. Frequencies of eigentones of resonators
Should be certainly multiple each other to provide “an enclosure
Waves ”. Resonators should settle down in pairs in each of three mutually
Orthogonal planes. In each pair at the first resonator frequency of the natural
Oscillations should be f1, and at the second resonator - f2, and the relation of these frequencies
Should yield an integer. Each pair of resonators will create modulated on
To amplitude oscillations with a carrier frequency f1 and modulation frequency f2 (drawing 1 see)
Drawing 1 - the Vortex, as sruktura-attraktor at which the exterior surface has
The plus curvature, and an interior surface - the negative curvature.
Drawing 2 - the Projection of the hologramme created by a pair of resonators
Resonators with identical frequencies of eigentones f1 or f2,
Located in different orthogonal planes should have phase shiftings 90 °
In coordination working resonators, that is when waves of each resonator
Are harmoniously enclosed each other, and disposed orthogonally from each other
Will shape hologramme projections (drawing 2). Each projection will be
To develop with other orthogonal projections and as a whole, generated
The volume hologramme finally forms structure (drawing 1).
The created structure will be similar to a globular lightning or a mega-electron. This
The structure will start to grow in volume, at each new impulse to involve
(поляризовывать) all new and new volumes of universal medium. Thus energy on structure formation will undertake from environmental universal medium. To remove energy it will be necessary by its pumping out from the generated structure.
Thanks to that in the generator of a primary impulse divU0 there is a discharger,
Which clears after impulse passage, energy from resonators will not be
To leave revertively in the reel of the pulser at the expense of a common reactance of reels.
Prof Stanley Unwin reincarnated! ;D
http://www.youtube.com/watch?v=jY-PEeX5xYY (http://www.youtube.com/watch?v=jY-PEeX5xYY)
-
I have to agree..
NickZ I am in total agreement with your last posting. If you want to contribute lets get on this.
In my musings about these type of devices one thing always gets confused in the responses I receive. Magnetics are the result of currents setup by voltages. Magnetics are never the initiator of the electrical voltages. Lets look at a magnet. First lets touch on my experiments of the crystal batteries. Most objects in space have a standing potential value. This value is based on the position in space and the environment they are surrounded in. This is why or how the crystal batteries work if galvanism is removed. Each material has an individual standing voltage in that space which can be drawn upon.
Some materials like used in magnets have strong values in close proximity to each other. Since all materials have space in them and are never solid this creates the ability to have miniature electrical pairings and lineups of pairs. When subjected to high voltage fields on mass we can align these pairings on mass and allow the magnet to cool and solidify into a rigid set of channels forming the magnet. It is due to the electrical nature of each molecule is the reason for this formation. Also phase changes are used to lock in the formation on the whole to make the magnet permanent and the external alignment field can be relaxed after phase change has occurred. So again the electric field is the initiator of the magnetic flow. If there is no such initiator there is no magnetic response. This is why some materials are magnetic and some are not. The conditions inside of the material does not have the same configuration of electric fields between each atom. Although it has been proven that non magnetic material do show at extreme magnetic field intensities magnetic responses. Case in point: Frog floating inside of the strongest magnetic field ever produced by man.
This is the problem with most attempts to replicate Tesla like technology. Most think in magnetics only and should be thinking in Electric then magnetic as a result. The initiator is the electric and the resultant work should be a conversion from electric to magnetic in the load. Tesla found out that when dealing with the magnetic, it was lossie but when dealing with the electric it didn't have the same losses. In fact High current transfers create huge losses in transmissions on the other hand high potentials have some losses but on the whole are more efficient for transfers. This is why Tesla designed the high voltage lines and AC to accommodate more efficient transfers of energy.
I realized this when using non wound resistors and the different forms of energy talked about here. Heavier currents caused more losses with the same resistors. But if I used higher voltages before the needed current at the load my losses went down drastically and the efficiency went up. Of course I had to change the load to accommodate for a conversion at the load to do this. Tesla was just starting to understand this process and everything he was looking at proves this concept after AC was created. Coupled with resonance he could attain near unity on the energy usage of power of normal devices. Then he started to look at the load and he found a way to build in coupled resonance and energy amplification as well. Although he didn't come right out and say it, he found a way to hook to the natural stores of energy in our world in the most efficient ways.
Tesla accomplished this feat by approaching the wholeness of the entire system and resonating the entire system to net a gain and get the work he desired from that system. Although he was working in the extreme end of the spectrum his realizations were profoundly accurate even in the smallest of devices. Nature works in the subtle area of the scale but the vastness of nature and the environments it holds is massive and the response of that vastness is huge.
We should be creating generators of huge potential instead of massive current. This would allow for easier generation and better transmission to the loads. A generator of huge potentials is quite easy to turn and all we then need to do is convert the high potentials into whatever we need as the load current. There are ways to shield this higher potential energy as well and Tesla had the knowledge of it:
http://www.teslauniverse.com/nikola-tesla-patents-514,167-electrical-conductor
As a side note I wanted to ask a question... Don't you think it funny that Tesla started calling his motors, Rotating Transformers?
That is one huge clue how to design these systems.
I think Tesla also used resonance of the weight of the primary and secondary of these rotating transformers. pound fer pound they were equal but the primary was segmented more and the secondary was segmented less. Both were of equal weight but the ratio of segmentation was completely different.
Some work has been done in this field and that is Thanes work of using a high voltage coil within a low voltage coil. You could think of this as a looped generating system. The looped part is the transformer action between the high voltage coil and the low voltage coil. As the current flows in the low voltage coil there is a subsequent generation of the high voltage coil that boosts or loops the current through induction between the coils. One generates high voltage and the other generates low voltage back and forth.
Another clue is Lasersabers experiments along these same lines. The proof is there we just need to look at it with fresh eyes and see it for what it is.
-
Jb5:
Most of us here have heard and talked much about Tesla's ideas, his Tesla coils, wireless transfer of electricity, etz...
Some of us have made some devices along those lines. I've worked extensively on trying to improve JTs to self-run, as well as several versions of the Lasersaber Joule Ringer 1- 3.0 version circuits, and his cross-over circuits. So, I'm familiar with that type of small scale pulse technology. However, I still have not really been able to obtain anything more than just what efficient circuits can do.
I have not read or heard about Tesla ideas being free energy devices, as most all have generators of some sort that are providing the input source, or are circuits that harvest minimal energy from the air, etz... Although his Pierce Arrow experiment is still as unresolved as ever. So, I do see that there is some possibility of some amount of "extra" energy being something doable.
All transformer have both the electrical and well as the magnetic aspect to them.
But, it's looking like there may be more to it, than simply raising the initial input source by pulse technologies to higher voltages, and then down stepping it, to be used for normal 50 -60 hertz operation.
We have discussed "transistor shorting" methods, as well as combining or heterodyning two or more types of voltage/currents on the same coils. Such as on the ferrite yoke cores, or other ferrite cores. But, still none of us have "hit on it" (OU), yet.
We have also seen what feels like a million diagrams, schematics, videos, etz... But, up to this point, we still don't have a clue as to just how energy from the air, or earth, is obtained, extracted or harvested from a successful working free energy device.
At least I don't. Just being honest. Honest Nick, Ha!
The best advice anyone can give at this time, is to show a real working model, for others to replicate. As ideas abound, but still no actual useful device to be had or reproduced.
-
@RailGS
Must the frequency ratio of one resonator and the thick primary also
be an integer?
<Each resonator includes the reel having Considerably большее number of coils,
than the reel of the generator-shaper primary Impulse and with more thin wire.
One extremity of such reel is earthed, and another - Remains to free>
For me this is a Tesla coil secondary. And we need more than one? (ResonatorS)
And their frequencies must have an integer ratio to each other.
<Resonators should settle down in pairs in each of three mutually Orthogonal planes.>
What means: 'three mutually Orthogonal planes' ?
Drawing is needed.
Is this only grown in your mind, or is this an extract of your building experience?
-
Jb5:
Most of us here have heard and talked much about Tesla's ideas, his Tesla coils, wireless transfer of electricity, etz...
Some of us have made some devices along those lines. I've worked extensively on trying to improve JTs to self-run, as well as several versions of the Lasersaber Joule Ringer 1- 3.0 version circuits, and his cross-over circuits. So, I'm familiar with that type of small scale pulse technology. However, I still have not really been able to obtain anything more than just what efficient circuits can do.
I have not read or heard about Tesla ideas being free energy devices, as most all have generators of some sort that are providing the input source, or are circuits that harvest minimal energy from the air, etz... Although his Pierce Arrow experiment is still as unresolved as ever. So, I do see that there is some possibility of some amount of "extra" energy being something doable.
All transformer have both the electrical and well as the magnetic aspect to them.
But, it's looking like there may be more to it, than simply raising the initial input source by pulse technologies to higher voltages, and then down stepping it, to be used for normal 50 -60 hertz operation.
We have discussed "transistor shorting" methods, as well as combining or heterodyning two or more types of voltage/currents on the same coils. Such as on the ferrite yoke cores, or other ferrite cores. But, still none of us have "hit on it" (OU), yet.
We have also seen what feels like a million diagrams, schematics, videos, etz... But, up to this point, we still don't have a clue as to just how energy from the air, or earth, is obtained, extracted or harvested from a successful working free energy device.
At least I don't. Just being honest. Honest Nick, Ha!
The best advice anyone can give at this time, is to show a real working model, for others to replicate. As ideas abound, but still no actual useful device to be had or reproduced.
Again I can not agree more with you my friend.
I can tell you this is how I do my computer Technician work.
First you read a lot about the system. Everything that is available should be digested and understood in order to build a proper system. In this case there is a great many who have touched on an aspect of the whole system and run with that. The problem being it is just a small portion of that system. Looping the system is an entirely different thing. Lets not focus on that yet. First we need to learn to walk then we can learn to run.
Let me give you a quote if I can find it when Tesla was going through the bankruptcy hearings over Wardencyffe.
on page 171 of the 1922 document of the Wardenclyffe bankruptcy proceedings:
"Then there on each side were long specially made , how do you call them, not desks or shelves, but closets, I might say, which were specially made to contain the apparatus because I had accumulated for years hundreds of different kinds of appliances which stand for a certain principle, and this apparatus was stored in there, and on top of these I had again all full of apparatus, each representing a different phase."
As I have stated many many times before little bits of a total system are hidden in each patent and each lecture when then put together will net us a free energy device. Every device was a singular concentration on one aspect or phase of an aspect that he was exploring. This is how he hid the most valuable invention to known to man. Not one device will get you there but a plethora of devices or in his words "aspects" of a theory he was attempting to prove. Each device proved without a shadow of a doubt they would work. Each concept was worked out and then used as a whole device. The OU concept is rather stupid if you ask me to be honest. It isn't free but already running and flowing all around us. This never was more apparent then the harnessing of Niagra falls to power Rochester and surrounding areas in NY State. Other then the cost of the equipment and maintenance how much did it cost them to provide this energy? Power cost was about a few pennies per watt hour to residents so most if not all of the costs were over once the machines were paid off. Pure profit for these companies like Westinghouse. Of course wiring would be a huge cost and this was the problem Tesla was trying to tackle. Again this is one aspect of a total system. No wires... zero infrastructure costs....
Lets go back to my explanation of telluric currents and how this works with Akula's example of the Tesla system. Hidden in there is a loophole that allows one way ratcheting like effect. This mechanism is the real impulse technology. Not AC. Not square waves. Just a line on an oscilloscope. A transient form of energy as we know it today. No return just outward expansion. This is the Discovery that Tesla stumbled upon. This can only be accomplished by the magnetic spark gap. Why? Well the polarization of the magnetic filed filters the event. One way conducts and the reverse flow gets dispersed out of the gap. This is the true discovery and one that the others do not want to spread. When a coil is hit with this kind of energy it of course responds with environmental energy known as Bemf. This response is free and can be amplified by the size and orientation or style of the coil used to pulse.
Some have touched upon this event like Bedini and others but in their attempt end up not using real pure impulses. Square waves are not impulses per say. The time of on, in an impulse must be very quick to the off portion. Extending the on portion only requires more current from the source and counters everything you are trying to achieve. The less the on time the less the damage that is done to matter conducting the event and the stronger the excitation of matter can attain. This was never more apparent then the experimental results Tesla received when playing with his discovery. The initial discovery was a problem he was trying to look at for Edison after he had fixed his generator problems. The linemen were getting hurt really bad at either closure or opening of the switch. Cant remember which one it was. This was due to the immense voltage and the suddenness of the excitation of the linemens matter. If there were many impulses it wouldn't have been as deadly if at all because the transition from excited to not excited would have been gradual and not sudden. When the matter is kept excited by a train of these impulses the matter has little time to relax back to ambient levels. You could think of it like this. Exciting something once powerfully allows it to charge up very high then collapse down into a radiative collapse. This will tear apart anything that it's mass can not hold together. Remember nothing is solid in the sub micro scale. Literally the spacing grows as it re-radiates this excitation energy. This is because every atom is excited and then radiates that excitation back out of its surface. Since atoms are very close you can imagine what this would do. This energy does not want to touch and will physically rip an object apart to escape it's binder(atoms).
Tesla noticed that thin wires exploded like dynamite if not more powerfully after the impulse was initiated. So mass of the excited object must be enough to stand the impulse or singular impulse.
More on this after you have had a chance to digest all this....
-
@ above,
Nice said! can you demo what you say?
-
Yeah I can and will demonstrate all of these but there is credible examples in what Tesla did and reported through his writings. Coupled with the other experimenters reports we can see more examples of each aspect of his Theory he was proving.
Don't get me wrong, Tesla didn't start with the theory and work towards the proof. This theory came about after he started his investigations and slowly formed as he went from phases to concepts for each invention. One of these days I will get around to laying out all of his inventions so that we can see a chronology of this research path.
Tesla started with the event that linemen were being killed and from there every aspect was explored and inventions patented from each aspect. You got to remember this was totally new territory back then. Some stuff had already been touched on but Tesla took it to a higher understanding. This is never more apparent then the inventions like the bifilar coil and it's proper configuration, also strangely enough the capacitor was also improved on as well.
http://www.teslauniverse.com/nikola-tesla-patents-567,818-electrical-condenser (http://www.teslauniverse.com/nikola-tesla-patents-567,818-electrical-condenser)
Utilizing oil as a superior dielectric allowed for the condenser to charge beyond the limits that current capacitors can go. Yes it broke down at those extreme charge levels but the oil was very dynamic and without air to cause more damage it could be tolerated much more then traditional capacitors of the day. The same goes for transformers. Although we caught on to the transformer version it never made it to the capacitor version as much. This is because not much uses the extreme limits other then some Microwave ovens now.
So yes I will be doing examples of everything I am talking about here. But sadly that will have to wait till I get moved and my Lab is set up.
On the excitation of matter and using enough mass to hold together after the single impulse was played around with by Tesla. His hairpin experiments is that proof. And the reference that I showed in post #1 is also proof that he knew the results of this study. I'll attach the proof later(attached). It has to do with nodal points on the hairpin circuit or any circuit that uses this concept.
Here is the reference again:
http://www.tfcbooks.com/tesla/1919-05-00.htm
-
Finally Thane has fessed up to what runs his RegenX technology. No wonder no one wanted to get in on it as an investment. It was all Tesla technology. Check this out...
http://www.slideshare.net/ThaneCHeins/pdi-regenerative-acceleration-generator-regenx-2013-patent-disclosure (http://www.slideshare.net/ThaneCHeins/pdi-regenerative-acceleration-generator-regenx-2013-patent-disclosure)
I am hearing he is open sourcing it now because he can't sell Tesla's tech as his own.
You can save each page as a jpg to get the whole document. Right click each page then save it to a directory. There is only 26 pages to copy this way.
It is funny how he in the end calls it a steady state design or at least references the term in the last statement.
Get it before it disappears.
-
Good Find, Most energy conversion devices are all based on tesla's tech
-
Nice ;D This is the forum that I am looking for that only talks about Tesla and his work. This is the real path to Tesla Energy Transfer Energy. Tesla made it simple but people make it complicated , what was posted on the first was all correct and everything jbig5 posted is correct and the real path on understanding Tesla. One should look at the system of Tesla as new system and dont refer to the Classical book Idea.
I think jbig5 you already have the answer the same as mine. Tesla system is nothing new but a improvement of Hes AC electrical system with the combination of the Condenser action. Wireless doesnt literally electromagnetic waves, but a new way to connect the two towers or transformer by other means like HV discharges/Sparks/Arcs and the ground. Tesla always work fore efficiency and improvement of any devices that he think will be good for the future= he has already known it that the wire for power transmission will be go a very high price that is the reason he invented the so called COmplicated Wireless Energy Power Transfer which is actually simple.
Tariel Kapanadze " my secret is so simple that you will laugh" ;D ;D ;D
stupimeow ;D :D
-
Duck on Pekin ;D [/http://media-cdn.tripadvisor.com/media/photo-s/02/67/23/7e/peking-duck-station.jpgb]
-
I wouldn't say it is all about Tesla. Not all of it is. Tesla did read a ton of stuff by many many authors. After all he was the head of the electrical engineer for a bit. He was well educated and didn't hold on to that education like it was the only thing going. In my opinion he was a true scientist who was open to the fact that the current understanding was a bit off. He knew this because in that day after being told AC wouldn't work and wasn't viable that it was working and very viable. But Tesla even admitted that he made a mistake with AC. As usual instead of freeing us it chained us up with meters and bills. That wasn't his aim. He created a cash cow for these guys that they continue to protect like it was their children. After AC he noticed the impulse technology and he knew this technology could free us from the AC slavery that he mistakenly created for them.
If you read his writings Like this (The problem of increasing Human Energy): http://www.tfcbooks.com/tesla/1900-06-00.htm (http://www.tfcbooks.com/tesla/1900-06-00.htm)
The word delay is the key.
We see his true intentions. He was a humanitarian and truly wanted to free his fellow men and women.
As for Thane's device the problem is it is a normal generator with bifilar coils nestled in there to give the generator a gain when the load was applied. For years Thane professed it was something new, which if you look at the patent is really just a bifilar coil added which was a Tesla patent. After some time and I saw the videos previously released I started to comment on the videos on youtube saying this smelled of Tesla. Then the videos were removed, then changed to have Tesla's name on them. Go figure. Now that the patent is fully released and shared you can see that the only change in the device is to have the bifilar coils added. Now how could a patent be released again for the same device like the bifilar coil? That is the only difference. I am betting that Tesla did work in this area. I'll have to check his motor patents to see.
ok this is as close as I can get for this type of system: http://www.teslauniverse.com/nikola-tesla-patents-555,190-alternating-motor (http://www.teslauniverse.com/nikola-tesla-patents-555,190-alternating-motor)
Look for the word delay in that patent.
-
Wesley translates video : OU Device presented by Andriej
http://www.youtube.com/watch?v=eUxFuW3JYdY (http://www.youtube.com/watch?v=eUxFuW3JYdY)
Wesley
-
I am kinda suspicious of a device wrapped in tape. One thing that I plan on doing is when presenting these kind of devices is to fully take it apart and reassemble it right in front of the camera. If as he says it is based on Tesla technology then what could be proprietary in the design.
Lets get to the bottom of this kind of tactic. Listen if it is a constant output device once started then selling that device is not gonna happen. The current established system of money will never allow anyone a resizable virtual store of that money like the US does with it's printing of cash. Since there is no direct backing of the dollar they get away with just printing more but they protect that ability to create more to their own discretion. They will not allow anyone else to have this ability. That includes creating copious amounts of limitless power.
It is gonna have to be in the open and free for all to get this stuff out there, to break their grip on us.
Hoarding it and trying to protect the secret has only one outcome, ask Stanley Mayers what that outcome is.....
-
http://youtu.be/G9KEBOC4coQ (http://youtu.be/G9KEBOC4coQ)
will be ready to watch around 2:20 AM EST
Wesley
-
I find it hard to believe that all of the measuring devices are measuring magnetics at any point in the video. All of the devices are measuring voltage and voltage only. Those are not current traces they are voltage traces. Although you could extrapolate current on those devices they are not measuring current the way he has them setup.
We all know by now that magnetics are a factor when the electric current flows but in a coil it is very very different. A coil will use magnetic field to choke the current and force the current into a voltage conversion. This is done by segmented coil loops that use self induction as the mechanism of conversion into the electric field. The coil will have a dam of current on say the entry point and a flood of potential on the exit point. If we use DC it will choke the current out as the dam fills and will stop eventually all together.
A capacitor is a direct converter of current to the electric potential on the plates of that capacitor and will exhibit this behavior even faster with DC.. Although there is zero current flowing in the cap when the dam fills. Caps are very fast when compared to coils. Coils have a short in them that allows current to flow momentarily while the dam fills and chokes the current flow down as the dam fills in the whole coil but the cap doesn't do this at all, again there is zero current flowing in between the plates. Two seemingly similar events but very very different mechanisms.
This leads me to a discussion of what is the magnetic field and what is the electric field. Tesla said that in his devices for the transmission of energy that any magnetic field on the antennas was a waste of energy. Why?
Well simply put I conclude this: Magnetic fields collapse in on themselves after the current is stopped. While the electric field is expansive and has no collapse at all. One is constrictive (magnetic) conservative and the other is expansive (electric) or radiative.
This was Tesla argument that Hertz was dead wrong about what radio waves were. We all KNOW that in order to get a magnetic field we need an electric current. We all know that the two are bound together. But in Tesla's description of his transmitter he had stated that he only had a loss of about 2%-5%<---Magnetic field losses, 98%-95% of his transmission was in the electric field. The difference between the magnetic field and the electric field is huge. One is restrictive and near field only (magnetic) and one is radiative and longitudinally oriented or far field capable (electric). both are 90 degrees out of phase from each other. Like a fulcrum in fact or the infamous teeter tauter. One moves in a sideways motion (magnetic) and the other moves in and out longitudinally (electric).
Hertz talked about magnetic waves but we all know that around a coil the magnetic lines are conservative and when the current is stopped what happen to that field? Yes it collapses into the source of that current which in this case is the coil. Those lines do not radiate out if the current is cut off. This is because the magentic field is attracted to itself and is looped. While the electric field is radiating out of the coil and is anchored by the magnetic field lines. Because the magnetic field can not just disappear it converts into the electric field through induction between the two fields. As the magnetic field gets weaker the electric field gets stronger through this conversion and is evident by the BEMF shown in the coil. when there is no more magnetic field the electric field is not anchored anymore and continues on its radiative path away from the coil. I will try to animate this process.
If this relationship starts out without a magnetic field it is considered static electric and for the most part useless. There must be some magnetic field to do the conversion and this is never more evident then from the German made converter that is called the Testatika.[/size]
[/size]
In all of the pictures that I have seen there is two magnets that bring the two energies together. The magnets are to organize the static electric pulses into an electric pulse through the use of coils around the horse shoe magnet legs. I don't know if the device is legit but it does show the very same conclusions that I came to about the two fields having to be present to get useful energy out..[/size]
[/size]
My point about all this is that in all of our history we have focused on the magnetic and not even bothered with the potential that sets up the electric current. For the most part it got shoved aside and ignored. Since all natural events seem to operate on a different approach that is for the most part current-less I am of the opinion that the magic responsible for all natural events is based on the potential of the electric field and not due to the magnetic portion we chose to focus on.
Lets take for example the Sun. Do you actually believe that the suns magnetic field is the reason or even capable of extending the megnetic field all the way through our solar system to end in the heliopause[/font][/size]? I don't. So the only other force that we know of is the electric far field when dealing with the magnetic near field.[/size]
-
jbignes5 (http://www.overunity.com/profile/jbignes5.25455/)
I see what you say.
Electrostatic field gives us potential of interaction- that is static force but actively produced.
action = interaction till the next change - (minus) losses.
the same assumption we might have to standing wave (SW): it is there and is doing nothing.
Well good assumption, and dead wrong.
During SW we have power circulation back and forth due to impedance mismatch at the load side( even if the load does exist at all)
example if the end of 50 ohm coaxial cable is short or is open than the resonant circuit thinks that it is short it does not allow energy to dissipate.
But instead signal is bouncing between transmitter and the end of coaxial cable. That adds to additional grief at the transmitter side( additional heat factor)
Eventually we are heaving losses to SW because of that.
The rule of law is : first resonate in order to dissipate.( transmit )
In akula or Tesla example electrostatic field acts as a medium similar to coaxial cable.
But parameters of coaxial cable must be met ( 50 ohm matching output of the transmitter )
in order to signal travel inside coax at the first place to the load of 50 ohm and than be emitted out.
Interesting fact is that in impedance mismatch situation you will see hot spots in the coax by touching it with your hands.
if than someone will be able to get into this points of concentrated energy -and try to couple it than in these places there is no heat any longer
That is why Arunas proposed additional winding along HV Tesla voltage that has only 2 sections connected in series between themselves (creating one winding with 2 ends)
It is just that secondary winding of Tesla Coil acts as the waveguide ( the same as coax cable)
Did you ever ask yourself what is the very top of Tesla Coil connected to (to a load capacitor- balancer )( but it is very special one the space 3 dimensional balance)
From now on we are dealing with spacial way of analyzing dual resonance effect -where first winding is in non stop resonance due to capacitor.
Wesley
-
What is static field ? There is NO such thing :P
-
What is static field ? There is NO such thing :P
Really no static field. Then how does a comb attract paper across a distance? Oh wait I remember spooky action at a distance....
The electric field is such a static field but it is in motion and a static field is not in motion. Very simple.
-
jbignes5 (http://www.overunity.com/profile/jbignes5.25455/)
I see what you say.
Electrostatic field gives us potential of interaction- that is static force but actively produced.
action = interaction till the next change - (minus) losses.
the same assumption we might have to standing wave (SW): it is there and is doing nothing.
Well good assumption, and dead wrong.
During SW we have power circulation back and forth due to impedance mismatch at the load side( even if the load does exist at all)
example if the end of 50 ohm coaxial cable is short or is open than the resonant circuit thinks that it is short it does not allow energy to dissipate.
But instead signal is bouncing between transmitter and the end of coaxial cable. That adds to additional grief at the transmitter side( additional heat factor)
Eventually we are heaving losses to SW because of that.
The rule of law is : first resonate in order to dissipate.( transmit )
In akula or Tesla example electrostatic field acts as a medium similar to coaxial cable.
But parameters of coaxial cable must be met ( 50 ohm matching output of the transmitter )
in order to signal travel inside coax at the first place to the load of 50 ohm and than be emitted out.
Interesting fact is that in impedance mismatch situation you will see hot spots in the coax by touching it with your hands.
if than someone will be able to get into this points of concentrated energy -and try to couple it than in these places there is no heat any longer
That is why Arunas proposed additional winding along HV Tesla voltage that has only 2 sections connected in series between themselves (creating one winding with 2 ends)
It is just that secondary winding of Tesla Coil acts as the waveguide ( the same as coax cable)
Did you ever ask yourself what is the very top of Tesla Coil connected to (to a load capacitor- balancer )( but it is very special one the space 3 dimensional balance)
From now on we are dealing with spacial way of analyzing dual resonance effect -where first winding is in non stop resonance due to capacitor.
Wesley
Ok have to show this again I guess that explains the reason for the capacitance on the Tesla coil.
I will continue later. Review the documents again made by Tesla. It takes a bit sometimes to digest it all...
-
another video of Akulahttp://www.youtube.com/watch?v=ScXhI2hQawc&feature=youtu.be (http://www.youtube.com/watch?v=ScXhI2hQawc&feature=youtu.be)
Wesley
-
another video of Akulahttp://www.youtube.com/watch?v=ScXhI2hQawc&feature=youtu.be (http://www.youtube.com/watch?v=ScXhI2hQawc&feature=youtu.be)
Wesley
Now this is a very good video.
Lets now look at another take on things. This is kinda synergistic to my thoughts on the Universe and everything going on in that Universe.
http://www.youtube.com/watch?v=5OI77ERlDs8
I couldn't have put it more elegantly then this man.
-
Everything and I mean everything is now being found out with this new view of the Universe. And it is pretty much what I have been saying for years now. All the fantasy that I was accused of dreaming up is being jusified and shown.
Stunning video of this new understanding.
http://www.youtube.com/watch?v=m6YVJ6hq6Hg
The only thing that is different is the geometry and not so geometric. Somewhere in there is the pyramidal shape. As computer graphics guys will attest it is fundamental to computer graphics. Well it turns out it is fundamental for real life also. Organized vs. Chaotic is another factor in this. Infinity of chaotic being just as energetic as the limited Organization we call matter. Can you imagine the organization that plasma brings to the table. Huge networks of plasma showing us where these great flows of organized energy exists and connects us all to this living network we call the Universe.
The distinct nature of this network means that at any point in the whole system we can create great flows of energy by learning how to manipulate the already existent components of this great network. We can bring organization to the chaotic network and focus and manipulate it to our will by the use of the electric field. This field will create and manipulate the plasma network into ever growing technologies. Imagine super powerful computing chips that run off of the standing potential of two masses of matter. In computers all we need is 1's and 0's. On and off. Current is not needed for this process. The 1 could be the positive charge and the 0 is the negative. Remember we can not create a change in the network without pulling in and organizing the network into our systems. There will be a normalization period that the network and it will grow and strengthen. I and the others saw this in a few of the crystal battery experiments.
I am thinking that we always think that the more current the better. Although this can be done a bigger exchange medium needs to be used: <-Coils.
Ma and a buddy are gonna start meteor hunting and we need rigs or metal detectors to do that. I think I'm gonna custom build the detector rigs. What I have designed so far is an impulse sonar device that uses Tesla waves and beam them into the ground then sampling the reflections to locate metallic objects.
Both coils are bifilar coils. One a solenoid around a flower iron core. This core will be used to guide the waves from the bifilar coil wrapped around it. It will be the center beamer unit complete with a back wave reflector made of aluminum. Around the core coil assembly will be a flat bifilar pancake coil with large central diameter void.
I got as bunch of 3055's and smaller transistors mpsa06+2n2222 to build the transmit and receive circuits. I have a good amount of scrap and over 300 led diodes to make a nice box out of. All I need is the analogue meters for the sensor circuit and to build the core, coils out of fine enamels wire. I will test the setup on a jig to start with and used known objects to tune the device. I should be able to make a very stable detector that would have a lot of room for advances.
I think this project will let me get to know this new system and let me experiment with non traditional cores.
My first design will be the most crazy core. It will have a segmented round stock core with flowering leaves that are surfaced ground so that it forms a round flower looking core. Two versions will be made. One of silicon steel and another of Aluminum. I am betting that Aluminum is better at converting this type of impulses then iron would be. Have to see for myself since very little has been done in this field.
Halfway through this chat he describes the True Tesla technology.
http://www.youtube.com/watch?v=og7oit3Iurc
-
Wesley,
just one question concerning the bifilar windings Akula was showing: Did you understand if these bifilar windings have been series- or parallell connected ?
From what I see I only could speculate that they are in parallell.
In fact one of the most interesting demonstrations I have seen so far.
Thank you Wesley
Kator01
-
Bifilar series is the way to go. Something in that method is negating the bad part of coils. This, in fact, energizes or converts the heavy magnetic field into a capacitive electric field. This augments the electric field to handle more current in the field itself. More surface area = more current capability. The surface area has to include the electric field as well. The conversion from magnetic to electric happens between the opposing wires and to an extent a third wire. (+) (-) (+) or (-) (+) (-) . In most cases it is a multitude of them in concert. All acting at once. This has an action like a pump. One direction goes outwardly and another goes inward depending on the impulse entry wire. Not only does this compact the wires automatically, by the attraction of one polarity to the other, but also creates a statically attractive force inwards or outwards depending on the flow or inlet. There is a lot going on in a bifilar wind. More then most will agree to or even fathom to look for.
-
Some translated schematics; had to guess a little; for example what is TT? Volume? Vols? Comarade?
Most of the component values are roman alphabet already; going to work on the coil specific; lots of text there.
-
Some translated schematics; had to guess a little; for example what is TT? Volume? Vols? Comarade?
Most of the component values are roman alphabet already; going to work on the coil specific; lots of text there.
TT = Tesla Test ?
TTL - commonly transistor transistor logic
but probably Tesla Test or Tariel Test ? ;)
Thanks for working on some translation of these.
-
TT is current transformer (ok last edit)
======
чистоты указаны по показанием приборов
и имеют ориентировочное значения их соотношения
чистота ТТ передю Равна чистоте ямр выходного бифа ТТ приемного
- - -
purity are for indication devices
and have an approximate value of their relationship
purity TT Before Equal to clean NMR output Beef TT receiver
=====
количество витков вв указано
согласно первичной обмотки
и в процессе настройки менялось
точное количесто не известно
- - -
number of turns of centuries indicated
according to the primary winding
and in the process changed the settings
the exact amount is not known
===
ПАПУЧИВШЫЙСЯ РЕЗУЛЬТАТ Я ПАЛАГАЮ И ЕСТЬ РЕЗОНАНС В РЕЗОНАНСЕ[/size]
РЕЗОНАНС ТОКА И НАПРИЖЕНИЯ ПЛЮС РЕЗОНАНС ЯМР!!!
- - -
(the results I received) result I PALAGAYU(KEWL!) AND IS resonance in RESONANCE
RESONANCE OF CURRENT AND VOLTAGE PLUS Resonance NMR
====
все намоточные расчеты проведены на основание лабораторных испытаний всех проводников.
испытания проводились на токовые и частотные характеристики с формированием спектра
дия выявления всех работавших проводне примесей и пониманя реальной картины
работы ЯМР проводника из которова изготовлена экспериментальная модель
-------
All calculations were reeling from laboratory tests of all conductors.
tests were conducted on the current and the frequency characteristics of the formation of the spectrum
Diya(?) identify all worked wired impurities and understanding of the real situation
NMR of the conductor is made of Korotova(?) experimental model
==
(lower text; left as original )
испытания проводились в лаборатории при институте по изучению ядерной знергетики
по адрису казахстан г. курчатов "парк ядерных технологий"
- - -
tests were conducted in the laboratory of the Institute for the Study of Nuclear znergetiki
by Adris Kazakhstan Kurchatov "Park of nuclear technologies"
=====
Блок согласования и формирование собираеца согласно получившимся
параметрам резонанса тока и напряжения приемного ТТ
С учетам моментов времени в процессе работы которых создается
- - -
Matching unit and formation sobiraetsa agree to receive
Resonance parameters of voltage and current receiver current transformers
Taking into account the time during which the work is created
(translation mostly google translate with some external searches to discover context of other words)
-
http://youtu.be/PPHipGkfSAY (http://youtu.be/PPHipGkfSAY)
Wesley
-
Witaj Wesley
Jeżeli dobrze zrozumiałem, wyposażenie próżniowe jest w Twoim posiadaniu. Możesz więc przeprowadzić doświadczenia, których ja nie przeprowadzę z powodu braku odpowiedniego sprzętu.
Więc do rzeczy, chodzi mianowicie o "oświetlenie" cewki nawiniętej bifilarnie (tej z patentu Tesli 512,340) katodą w kształcie reflektora parabolicznego również z patentu Tesli 685,957. Wszystko, czyli katoda i cewka mają znajdować się oczywiście w komorze pod zmniejszonym ciśnieniem.
Moim zdaniem właśnie tego typu lampy zasilały elektryczne auto Tesli.
Pozdrawiam
Arek
-
http://www.youtube.com/watch?v=9I3zTd6S3v8&feature=youtu.be (http://www.youtube.com/watch?v=9I3zTd6S3v8&feature=youtu.be)
Akula#6
Wesley
-
http://www.youtube.com/watch?v=HHPIRBK0DOw&feature=youtu.be (http://www.youtube.com/watch?v=HHPIRBK0DOw&feature=youtu.be)
Akula7 schematic
Wesley
-
Thank you again, kind sir :) (Did you mean to make the second one private?) Given the disclaimer of potential desync it's not so bad... I got the idea of what the circuit is meant to do on that side; but that's only 2/3 of it :) I know I'm impatient...
signal tracking with a time skew... with a lowband and high band limiter....
the drive should probably be at the opposite side from where you take a load? or both? I think a royer oscillator would track similarly... more of an analog solution
but I'm finding local parts that can build this...
NTE74HC14
http://www.frys.com/product/1003633 (http://www.frys.com/product/1003633)
NTE4046b
http://www.radioshack.com/product/index.jsp?productId=13076432 (http://www.radioshack.com/product/index.jsp?productId=13076432)
(Not this one; it's just an output driver module... 10-20V logic input)
http://www.irf.com/product-info/datasheets/data/ir2111.pdf (http://www.irf.com/product-info/datasheets/data/ir2111.pdf)
the output module is really rather complex... uses 12V to drive a coil to drive mosfets that drive 24-220V rectified power input across the real inductor...
This probably lays out on a board pretty well; need better package for power drive :)
(sorry if I'm interrupting and edit in progress)
-
Tracked down some more information; from what I gather There is an important concept from
(Tesla 7 N. TBSLA. ELECTRICAL TRANSFORMER OR INDUCTION DEVICE. ) (http://www.google.com/patents/US433702)
delayed induction by iron layers between primary and secondary; Assuming a direct induction to get the current rather than a delayed effect from collapse of a field ....
Akula's thread, locked from public comment, which is probably for the best :)
(http://realstrannik.ru/forum/48-temy-freeenergylt-antanasa/134547-akula0083-soobshheniya.html?limitstart=0)
Was reading some of the other comments, and there's fools posting to him that his machine doesn't work; and that the coil ideas are bogus. Crazy. I'm impatient though, where's the receiving half?
Like this schematic still requires a 15V and 24-220V input..... But I recall something about 3 parts so I guess I'm impatient :)
Schematic updated transaltion; this is one version; but the other has a 555 timer and override IR2113 driver attached for start/stop circuit
The other had better text than this one; just fixed TT translation and a few minor things.
-
http://www.youtube.com/watch?v=NFZX-zUYlmM (http://www.youtube.com/watch?v=NFZX-zUYlmM)
Wesley Translate's Akula#7 SCHEMATIC Free Energy Device (http://www.youtube.com/watch?v=NFZX-zUYlmM)[/color][/font]
Wesley Translates video of akula's # 6 (Free Energy Device)
http://www.youtube.com/watch?v=9I3zTd6S3v8 (http://www.youtube.com/watch?v=9I3zTd6S3v8)
Wesley
-
http://youtu.be/SS_CsCX2SHc (http://youtu.be/SS_CsCX2SHc)
Wesley&John:About Akula,LithuaniaExperiment,Rossi
I hope you will find it educating and interesting as well. There is some addition to understanding How Akula works plus new light on the general subject.And for these who is looking for easy free food - sorry if you do not read watch and learn - you last in the row of potential benefitsiants .
Wesley
-
So I was going to go about implementing this and there are subtle differences in the schematics so I guess it is the complete picture. Although both sides are the same PLL and phase advance(retard?) logic with subtle differences in frequency range selections and sources of inputs...
in the latest videos, the tall white coil will be the receiver, and the extra windings at the bottom are where the load will go.
It(receiver) resonates at a base frequency at 1/3 (50Khz not 150Khz). The transmitter resonates at a higher frequency. It looks like both are driven to their own resonant frequency;
The capacitor across pins 6,7 on CD4046 is 1n on the receiver and 2n on the transmitter.
On Trasnmitter there is an additional transistor KT503(?) on the transmitter to drive pin 3 on CD4046; on the receiver pin 3 goes to pins 4 and 5 of 74hc14; on transmitter pins 4,5 of 74hc14 are only connected to each other.
on transmitter capacitor to pin 9 of cd4046 is 240n instead of 100n(receiver).
the drive to pin 14 is handled differently (block change) (block change 1)
On the receiver there's an extra diode from pin 7 to pin 1 of 74hc14
on receiver resistor from pin 13 of 74hc14 is 10ohms; on transmitter it is 5 ohms
on receiver pins 9,10 of 74hc14 gots off schematic to a jumper and to coil diagram
(block change 1)on transmitter pin 9 of 74hc14 goes to IR2111 mosfet drive
pin 10 of 74hc14 goes to the transistor to pin 14 of cd4046
(copy and paste includes a size change for some reason; maybe I have my page zoomed)
So they are not the same schematics; the transmitter is mistranslated as a title, and is the one with the K555 (555 timer) the receiver is the one without the K555.
stray thought: so this is actually a good schematic to represent John hutchison's effects; He claims to use 2 tesla coils and a static field (van degraff) at interfering frequencies; and these are more about keeping the frequencies the same..... John huchison's work was utilized by ken shoulders to create EVO (exotic vacuum objects), which is similar to mark leclair's cavitation process...
NMR? maybe sorta... in a sense there is a relatively static field and another field moving through it... (a 1/3 wave is almost static compared to the 3x frequency moving through it... ) not at right angles... could be built at right angles...
Caduceus coils; none in this case... they do have frequencies where they apparently consume power, resulting in potentially a voltage sink, which should be continously satisfied by ground as a working theory.... but I don't see any such interfering coils here, they are all concentric.
what probably happened with the nano pulser in dally's gear is that it triggered a feedback wave and resulted in continuous avalance motion of the transistor... which would be in sync with the driving pulses; especially at forced resonance, the reinforced wave would exceed the collector making it not a GNSI but a phase regulated high voltage wave...
-
wow my friend the was a good one
Thank you
read this:)
http://www.overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg375903/#msg375903 (http://www.overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/msg375903/#msg375903)
Wesley
-
I don't know if you've been following this guy...
http://www.youtube.com/watch?v=a5aajLyTHjI (http://www.youtube.com/watch?v=a5aajLyTHjI)
Probably not a lot of new perspective but is another work in progress.
-
d3x0r
I don't know if you've been following this guy... http://www.youtube.com/watch?v=a5aajLyTHjI (http://www.youtube.com/watch?v=a5aajLyTHjI)Probably not a lot of new perspective but is another work in progress.
thank you my friend for information. I did not but I will now :)
http://www.youtube.com/watch?v=x67q0WOcXCg&feature=youtu.be (http://www.youtube.com/watch?v=x67q0WOcXCg&feature=youtu.be)
http://www.youtube.com/watch?v=mPAd-VTHjfs&feature=youtu.be (http://www.youtube.com/watch?v=mPAd-VTHjfs&feature=youtu.be)
http://www.youtube.com/watch?v=K5NnXOHb0Jc&feature=youtu.be (http://www.youtube.com/watch?v=K5NnXOHb0Jc&feature=youtu.be)
Wesley
-
I was experimenting with a biffilar coil of mine, running it in a Kacher mode, and saw that 200 turns or so one layer in 50mm diam, 24awg enameled wire and runs at a frequency of 2 Mhz. (interwinding capacitance must be in the range of 5-6 nf)
How that acula biffilar, of 100 turns 16? awg insulated stranded wire over a 100mm PVC tube connected in biffilar mode can have a fundamental? frequency of 75Khz?
Sounds weird.
-
I also used enameled wire (#25.5 awg) to wind a coil for testing. The below attachment shows my preliminary testing, which was done with only the bi-filar coil. I was looking at the system drawing on the previous page that shows a magnet coil and a split aluminum tube. By the way they are illustrated, I am assuming that they are below the bi-filar coil. I am thinking that they will reduce the resonant frequency, but not sure until I build and test. The magnet coil rings a bell in reference to Kapandze device. I remember reading an interview, and being ask, 'what would happen if the ground was disconnected while the device was operating'. He said that it had happened once, and caused damage to the magnet coil?
[/quote]
-
I also used enameled wire (#25.5 awg) to wind a coil for testing. The below attachment shows my preliminary testing, which was done with only the bi-filar coil. I was looking at the system drawing on the previous page that shows a magnet coil and a split aluminum tube. By the way they are illustrated, I am assuming that they are below the bi-filar coil. I am thinking that they will reduce the resonant frequency, but not sure until I build and test. The magnet coil rings a bell in reference to Kapandze device. I remember reading an interview, and being ask, 'what would happen if the ground was disconnected while the device was operating'. He said that it had happened once, and caused damage to the magnet coil?
I don't understand what you mean by 'a magnet coil'
-
I don't understand what you mean by 'a magnet coil'
d3x0r:
I'm not exactly sure why the two coils of the magnet coil circuit is connected the way it is yet?
aAs Always: have a good day
-
This topic is great and I want to watch it all closely.
I found an oddball link and who knows if it is real. What matters is the theorem presented on it supposing it is the basis of Tesla's work.
Looking at this topic here and thinking about the links info I am posting. I remembered a device that passed a signal through an ultra-violet bandwidth and the results were reported as a beam that could disintegrate even concrete and metal.
[size=78%]Nikola Tesla's "lost" theories (http://lofi.forum.physorg.com/Nikola-Tesla%26%2339%3Bs-%26quot%3Blost%26quot%3B-theories_3958.html)[/size]
Having the device presented in this topic as the producer of material that attracts the aether then bumping it to produce the so called smoke ring makes logic of what Tesla's work could be all about. I really don't know about the in's and out's of all these devices, but the mechanics all seem to be correlatable to the "ink ring" underwater maker. I hope some comments on my thoughts come forth. I don't mean to distract at all here, only add some understanding to the mechanism which may being employed that truly is causing the reactions we can measure.
-
This validates what John Hutchinson says about mixing physical fields of bandwidth from different outputs. Does this somehow increase or decrease the compression of the aetheral materials. Is what we can measure only the effect it has on the physical atomic structure? I know we are not pursuing a discussion of aetheral anything here, but there is some unknown knowledge that we do need to understand. All the hit and miss of a multitude of working then NOT working devices suggest an unknown.
-
d3x0r:
I'm not exactly sure why the two coils of the magnet coil circuit is connected the way it is yet?
aAs Always: have a good day
I see; this is just akula's postings on realstrannik; starting at this message is the only pictures of assembly of his latest coil, but he doesn't show the first layer...
http://realstrannik.ru/forum/48-temy-freeenergylt-antanasa/134547-akula0083-soobshheniya.html?start=54#166738 (http://realstrannik.ru/forum/48-temy-freeenergylt-antanasa/134547-akula0083-soobshheniya.html?start=54#166738)
maybe there's video...
I dunno, maybe the other leads on the photo are to the aluminum coil? looked through akula's channel, he goes from having nothing to having the coil and driver coil wrapped (presumably the other coil and aluminum too)
It looks like there's an extra coil on the schematic that isn't wound, but maybe I'm missing something.
-
d3x0r;
I have some opions based on my limited understanding of the system, but am hoping that Wesley may be able to shead some light 8).
Wesley:
In your opinion, do you think that the below wave form, in
reference to the Receiver Coil is what is being generated with
the oscillation and sync. Circuitry????
As always: Thank you and Have a great day. :)
br549
-
here is something that might help
http://www.youtube.com/watch?v=lEa_B-zYObc (http://www.youtube.com/watch?v=lEa_B-zYObc)
http://www.youtube.com/watch?v=0_fTQvEnhvQ (http://www.youtube.com/watch?v=0_fTQvEnhvQ)
Wesley
-
In the videos you posted stiveip there is a lot of accusation about using ground is probably fraud. I agree, that may be the point, but do you know any simple way to avoid ground and make floating device ?
If there is excess energy produced it's obvious the original power source is not able to withstand it and all is radiated as heat which immediately burn the device ! Actually I believe every strange accident in electrical apparatus is the manifestation of ungrounded energy excess.... ;D
Has somebody ever thought how to limit the current returned to the power source ? It is against Ohm law so must be related to transmission line, inductance and similiar. However at 50Hz there is not much to be done, because any LC filter would be enormous
-
I can't speak for anyone else, but personally I would be ecstatic to obtain excess energy from a device, with or with out a ground.
-
I also used enameled wire (#25.5 awg) to wind a coil for testing. The below attachment shows my preliminary testing, which was done with only the bi-filar coil. I was looking at the system drawing on the previous page that shows a magnet coil and a split aluminum tube. By the way they are illustrated, I am assuming that they are below the bi-filar coil. I am thinking that they will reduce the resonant frequency, but not sure until I build and test. The magnet coil rings a bell in reference to Kapandze device. I remember reading an interview, and being ask, 'what would happen if the ground was disconnected while the device was operating'. He said that it had happened once, and caused damage to the magnet coil?
Hello br549,
Those relative slow resonant frequencies of the biffilar coil tested results from having the coil (biffilar) shorted to itself or just being ends open or one open other grounded?
-
Wesley:
Thank you so much for the video information, very informitive.
Baroutologos:
Below is the setup I used for my test coil.
As Always; Thank you and have a great day;
br549
-
@Br549,
Thanks for the detailed info of your setup. So as far i understand, the 27 Khz resonance frequency of the tri-layer "biffilar" is with one end grounded and the other open (connected to probe of spectrum analyzer that is practically open)
Any idea about the inductance of that coil? Have you calculated that? I guess LC meter may not give correct figures due to internal capacitance. Any special observation so far?
Thanks
-
@Br549,
Thanks for the detailed info of your setup. So as far i understand, the 27 Khz resonance frequency of the tri-layer "biffilar" is with one end grounded and the other open (connected to probe of spectrum analyzer that is practically open)
Any idea about the inductance of that coil? Have you calculated that? I guess LC meter may not give correct figures due to internal capacitance. Any special observation so far?
Thanks
baroutologos;
The total inductance of the coil (connected in the bifilar configurration) is 30.7 mh. The waveforms (coil performance) seems to be similar to what is shown in the videos.
I was trying to get a better understanding of the Transmitter and Reciever Controller Circuits. Do you know what the KT555TB9 Chip is, and if there is an english (or translated) version of the spec sheet?
As Always; Thank you and have a great day.
br549
-
baroutologos;
The total inductance of the coil (connected in the bifilar configurration) is 30.7 mh. The waveforms (coil performance) seems to be similar to what is shown in the videos.
I was trying to get a better understanding of the Transmitter and Reciever Controller Circuits. Do you know what the KT555TB9 Chip is, and if there is an english (or translated) version of the spec sheet?
As Always; Thank you and have a great day.
br549
it's a 555 timer chip....
-
it's a 555 timer chip....
d3x0r;
Thats what I also thought at first. Started doing some digging and found this;
JK-???????. ????:K555TV9 JK Trigger.gif .... Single D-type flip-flop with set and reset; positive edge trigger. Rev. 10 — 2 December 2011 Product data sheet.
- Haven't found a pinout for it yet (in english). Tried to cross it to other D-type flip-flops (like the 40270 which has only 14 pins insted od 16. Still looking :(.
As Alway; thankyou and have a great day.
br549
-
Anyone:
The below attachment show the information I found on the KT555TB9 chip (used google translater to translate text) but could not seem to determine what pins #7, 14, and 15 are. Does anybody have any idea of what they are.
As always; thank you and have a great day.
br549
-
Anyone:
The below attachment show the information I found on the KT555TB9 chip (used google translater to translate text) but could not seem to determine what pins #7, 14, and 15 are. Does anybody have any idea of what they are.
As always; thank you and have a great day.
br549
Hi,
You write KT555TB9 in your text but it is K555TB9, okay? (There is no such device as KT555TB9)
Pin 7 is supply voltage negative (or common ground)
Pin 14 is Clear 2 (or Reset 2) input
Pin 15 is Clear 1 (or Reset 1) input
This IC is said to be equivalent to the SN74LS112N dual JK flip flop http://koapp.narod.ru/tehlit/hardware/22remontpc/t012.htm
see this too: http://www.evita.lt/en/p-catalogue/id-1/sel-142/st-700/russian-integrated-circuits_700.html#cat and data sheet :
http://www.evita.lt/getPdf.php?id=7295
rgds, Gyula
-
Hi,
You write KT555TB9 in your text but it is K555TB9, okay? (There is no such device as KT555TB9)
Pin 7 is supply voltage negative (or common ground)
Pin 14 is Clear 2 (or Reset 2) input
Pin 15 is Clear 1 (or Reset 1) input
This IC is said to be equivalent to the SN74LS112N dual JK flip flop http://koapp.narod.ru/tehlit/hardware/22remontpc/t012.htm
see this too: http://www.evita.lt/en/p-catalogue/id-1/sel-142/st-700/russian-integrated-circuits_700.html#cat and data sheet :
http://www.evita.lt/getPdf.php?id=7295
rgds, Gyula
Gyula;
Thank you for the information. I updated and replaced the previous attachment for others who may be interested.
As Always; Thank You and have a great day;
br549
-
Anyone who knows:
I need some help!!! :-\ Refering to the attachment below showing Akula83's system diagram.
Two questions:
1. What does the symbol (that I circled in red) of 2 arrows pointing toward each other mean?
2. Is one of the Magnetic coils wound CW and the other one CCW?
As always; Thank You and Have a Great Evening.
br549
-
Anyone who knows:
I need some help!!! :-\ Refering to the attachment below showing Akula83's system diagram.
Two questions:
1. What does the symbol (that I circled in red) of 2 arrows pointing toward each other mean?
I wondered that too
[/font]2. Is one of the Magnetic coils wound CW and the other one CCW?
All coils are wound in the same direction
-
@ Br549,
Honestly, even if i wondered over the circuit (since i am somewhat fond of circuits) and confused about that biffilar's low self-resonance frequency (still i am till i pulse run my biffilar's too) have not given much thought about the practicalities of this device.
It mixes a few concepts as the need of a ground (for grounding the device rather than sucking energy from it as many theories go), NMR, that we have not even a clue that this process can output energy and a God knows what.
If, really AKula wanted to help, will identify that very fact that "makes the energy", analyse and present it thoroughly along with how to(s), and then let us later worry about assembling a self-looped device. If you make a search, Akula has presented half a dozen schematics over the time that calims OU from them..
-
@ Br549,
Honestly, even if i wondered over the circuit (since i am somewhat fond of circuits) and confused about that biffilar's low self-resonance frequency (still i am till i pulse run my biffilar's too) have not given much thought about the practicalities of this device.
It mixes a few concepts as the need of a ground (for grounding the device rather than sucking energy from it as many theories go), NMR, that we have not even a clue that this process can output energy and a God knows what.
If, really AKula wanted to help, will identify that very fact that "makes the energy", analyse and present it thoroughly along with how to(s), and then let us later worry about assembling a self-looped device. If you make a search, Akula has presented half a dozen schematics over the time that calims OU from them..
baroutologos and d3xOr;
Seems to be some wired sh-- going on with my computer this morning. When I tried to post the last 2 times, I have been knocked off, (clear back to my desk top??. Anyway if no one knows, I will probabley wind the magnet coil CW a seperate cardboard tube (with the aluminum split tube under it) that will slip inside of my current bifilar coil, test it, and then rewind CCW, (only need to unwind and re-wind the top layer.
If both of the coils are wound in the same direction, then there magnetic fields will be opposit, and buck each other. Where as if they are wound in oppisit directions, (CCW and CW) then there magnetic fields will be the same direction and add to each other. (I would realy like to get it right the first time for a change (hummm). "Whats the odds of that happening ::). The two arrows pointing towards each other seem to suggest that the two magnet coils are opposing each other, why would that be.
Also it looks like the length of the magnet coil is 1/3 the length of the bifilar coil, and the diameter of the wire for the magnet coil is twice that of the bifilar coil, which would make the coil lengths (on the tube) all the same. It would be interesting to see a scope shot in real time of the magnet coil, bifilar coil, and the primary and secondary of the Tesla Coil, of Akula83's device while operating (4 channel scope).
As Always, Thank You, and have a great day
br549
-
I hate web browsers... I lose so many thoughts so many times.
Re akula's coil schematic;
what is Elk. magnet? does it just go to the chart? Ya, but the chart is 'bi-synchronization unit' which has two jumpers on it... I think that peice is missing schematically.
so the other end of 2.. is that just a capacitor? it doesn't have resonance? Is it just a stepup from (4)
3: output coil; located at intersection of 1 and (unlabeled, tesla coil)
1: interacts with (unlabeled, tesla coil), and I would assume (2) but maybe it's just the exciter (4).
- the aluminum forms a topload... which will be coupled with the capacitance of the (unlabeled)
2: again, is it just an LC tank? is it high resistance and low capacitance?
considering Dally's scheme; he has an LC tank; loop antenna, but this is only effective in the near frequencies... it'll fail as the system drifts, so probably this is a thing that should be added after; otherwise it's the intersection of a resonant tank of a stepup toroid and an inner coil, and the outside is a high potential pulse; when the load has a poor inductance matching on my mazilli I can get such a pulse. The pulse shows up as a postiive potential on all conductors in the area.... that is the other coils don't induce it, because both ends are both positive... and yes the scope probes themselves in the area also sense it, but it is more significant when attached to another conductor.... But both intersect on the output coil.
A) neither have a ferrous core.
b) a copper strip pickup and grounds that run through coils aren't required... Though a inductor passing through a ferrite tube does increase its inductance...
the copper is also (maybe) a single turn winding? It's not closed, and there's no connection except to the air, which is to the other tesla coil.... so it really looks more like a topload.
--------------------
highest potential, higher frequency (3x)
higher potential, frequency (x)
tuning the exciting side to the side it drives is also a +
------------
Having read eric dollard's books, lone pine writings, and the 4 quadrant theory thing, I have a better appreciation of the dynamics of this. He's a good translator between maxwell-steinmetz and me :)
I had this one mobius coil that was 4 layers.... it worked OK, but I really kinda didn't like it, like there was just something wrong with it. I think layers matter a lot in this case...
5 layers...
exciter, pickup, output, pickup, exciter
low inductance, high-medium inductance, low-medium inductance, high inductance, low inductance
1, 5, 3, 9, 2
dally would additionally include another stepup before 1...
1,10-1,5,3,9,2 (10-1 is in parallel, with a capacitor)...
I know I'm not making sense, just sketching an idea..... but really
1:x (out) 3x:1
Okay here's where coil dynamics confuse me.
X inductance is going to be less than the tesla's inductance. But yet, has a lower frequency.
The tesla's inductance is going to have a huge penalty because of length... but having a higher voltage, it's frequency is higher? but then specifically it's resonant frequency, which includes capacitive reactance, so I guess there's just a lot more capacitance on (1)
but then there's the consideration of just length of wire, which itself has a wavelength.... but again the longer wire in the tesla is going to be a lower frequency... so if I project multiple waves on the coil... so only a small portion at the bottom is induced with the secondary... then the ... stupid rotational phase thing can align on a higher frequency, giving multiple node points in the tesla tower... maybe a quarter wave of the quarter wave? It's driven not free oscillating...
---------
no words from akula in a while; did he run into technical difficulties? I hope all is well. I see others replicating too; this time I don't have a strong desire to be the first replication... but I think I can build a functional model... akula's system looks fairly robust; in that the logic follows the tuning, so having the coils, he should just be able to plug in the logic parts and demonstrate power? Maybe he waiting for a sufficient load?
Some of his last interactions, make me think that he's not actually the guy in the videos? he's questioning things on dally's and criticising other inventors instead of just going ahead with his own installation? I dunno I think too much probably; he complained that the content was pirated on stive's channel... or was he saying that he had pirated it?
-------------
I was playing with a particle simulation, simple gravity, electrostatic, magnetic behavior on particles... so I was modelling the magnetism, and playing with magnets, trying to establish the forces.... If two magnets are aligned with their poles to the north, and then offset so they can be passed by each other's sides, so the north is forced to remain up, the torque force increases, up to the point that the plane of the south pole passes the plane of the north pole... almost asymptotically but then starts to repel that pole instead of attracting the south to face the north, and a lateral translation force starts to apply more also.
Somewhat reminds me that when having a scope on AC, there is a spikey effect at the very top of the wave... but that's probably a comosite of all the reactance from the system... since most things are bridge rectified first, the 0.7V difference in switching time's... But maybe as the north and south pass each other there's a significantly higher force than would be expected.
-
I use to swim and work out to get an adiquate amount of exercise. But now that I have started chaseing free-energy, it has eliminated the need to do that, since I spend most of my time chaseing wild geese and jumping through hoops. Anyway I am also curious about the roll of the electro-magnet coil in the system. (Today, but maybe not tomorrow!) It looks to me like the transmitter block and the reciever blocks generate and stablize the two frequencies (I know that is probably obvious to most. (I'm a slow learner, so it takes me longer)). My question is: has anyone (digital electronics wizzards) determined by analyzing the circuit schematics if there is feedback between the two circuits for syncronization, or does it seem to be a function of the missing (magic box)? Note below attachment.
As Always: Thank You and have a great day. br549
-
Was wondering about the center of all these overlayed coils? There should be a very focused magnetic beam being projected from it during excitation of the coils.
Clearly, we have three separated coils making a focused mixed waveform. John Hutchinson did exactly the same thing using 3 separate units and look at his results.
I believe that if he knew it or not he had found a way to effecting the central mass polarities of the atomic nucleus. This in turn caused the outer sub atomic particles to polarize. Their orbits became looser or tighter due to this and even molecular bond boundaries changed. Evidenced by molecular bond destabilization and even gravity being overcome.
-
I think you may be right. Seems to me (by the looks of Akulas circuitry) that a big part of this is manipulation of the signals (frequency and phasing) as well as coil resonance. I'm thinking that If you can use a processor (micro-controller) to control them, it may make the expermenting and testing a little bit easier. Since I haven"t seen a completed electronic control circuitry for Akula's device, I think I might try converting the output of a tesla coil into a (Cmos / TTL) compatable signal, using it for the reference to generate and syncronize the other signals to it. (Note Attachment). Nothing ventured, Nothing gained. Although it seems like lately I've been venturing more and not gaining a lot. I'm glad it's just my hobby and not a job, or I am sure that by now I would have been fired.
As Always: thank you and have a great day. :)
-
http://www.youtube.com/watch?v=v9Nl6c7ZtS8&feature=youtu.be (http://www.youtube.com/watch?v=v9Nl6c7ZtS8&feature=youtu.be)
Wesley translation and comments About Akula video #11
Wesley
-
Thank You Akula for the information and Wesley for the translation and theory. I just started following and expermenting with free energy several years ago, but would love to see Akula (or any other researcher) be emortalized in the history books (next to Tesla and others) as the person who gave free energy to humanity), in my life time.
I to was also wondering about how much input power Akula was drawing from the grid (in video #11).
I am still working on converting the signal from my tesla coil to a digital (TTL or Cmos) compatable signal for my experment. Note below attachments for present status.
As Always: Thank You and have a great day.
-
And
-
@ br549,
I admire your zeal and line of thinking.
-
http://www.youtube.com/watch?v=v9Nl6c7ZtS8&feature=youtu.be (http://www.youtube.com/watch?v=v9Nl6c7ZtS8&feature=youtu.be)
Wesley translation and comments About Akula video #11
Wesley
Wesley,
Thanks for translating this video from Akula.
You raise some very important points about Akula's crude method of measurement. My thought is that either Akula thinks we are all stupid, or else he does not realise that his measurements are not at all reliable! Another point is why do we not hear any sound coming from the device in his garden video?: http://www.youtube.com/watch?v=3xUjJjBUdwE (http://www.youtube.com/watch?v=3xUjJjBUdwE) Surely, the two towers need to be 'talking' to each other in order to produce an output.
Hoppy
-
application of mixed frequencies?
http://www.rexresearch.com/maccanti/maccanti.htm (http://www.rexresearch.com/maccanti/maccanti.htm)
"Electromagnetic device (100), particularly to be used as a generator, for example of mechanical energy, comprising means (105) for generating a magnetic field, at least one electric conductor (110, 115) arranged inside said magnetic field, means (120) for generating at least one sequence of electric pulses having amplitutes variable in time, said means for generating pulses (120) being connected to the electric conductors (110, 115) for applying a corresponding pulse sequence to each electric conductor (110, 115)"[/size]
[/size]
"[/size]An example of the pulse sequences generated by the signal processing unit is:[/size] [/size]1/ 380V 448V 381V 447V 383V 450V 382V ... 2/ 449V 380V 450V 381V 448V 382V 447V ... 3/ 384V 449V 383V 448V 380V 446V 383V ... 4/ 450V 382V 448V 385V 449V 381V 446V ... "
[/size]
I didn't identify a specific time ... only that it's variable...[/size]
[/size]
composite frequencies ... modulated through a single output?[/size]
[/size]
I attempted to use my mazzilli's to drive my new coils that fit the resonant character desired; but they started to interfere... so I got very jagged pulses from both... needs a more steady state pulse generator... but even then the transistors are going to be "leaky"... maybe I just need better drive mechanism... [/size]
[/size]
[/size]
-
application of mixed frequencies?
http://www.rexresearch.com/maccanti/maccanti.htm (http://www.rexresearch.com/maccanti/maccanti.htm)
"Electromagnetic device (100), particularly to be used as a generator, for example of mechanical energy, comprising means (105) for generating a magnetic field, at least one electric conductor (110, 115) arranged inside said magnetic field, means (120) for generating at least one sequence of electric pulses having amplitutes variable in time, said means for generating pulses (120) being connected to the electric conductors (110, 115) for applying a corresponding pulse sequence to each electric conductor (110, 115)"[/size]
[/size]
"[/size]An example of the pulse sequences generated by the signal processing unit is:[/size] [/size]1/ 380V 448V 381V 447V 383V 450V 382V ... 2/ 449V 380V 450V 381V 448V 382V 447V ... 3/ 384V 449V 383V 448V 380V 446V 383V ... 4/ 450V 382V 448V 385V 449V 381V 446V ... "
[/size]
I didn't identify a specific time ... only that it's variable...[/size]
[/size]
composite frequencies ... modulated through a single output?[/size]
[/size]
I attempted to use my mazzilli's to drive my new coils that fit the resonant character desired; but they started to interfere... so I got very jagged pulses from both... needs a more steady state pulse generator... but even then the transistors are going to be "leaky"... maybe I just need better drive mechanism... [/size]
[/size]
[/size]
Not sure what kind of speed your looking for, but if you want to issolate the output drive circuitry from your control circuit you might try driving a single output with a optically isolated A/D circuit. I attached a JPeg of on that I have used (only as an example) which could be modified to so suiet your taste (single A/D output, or multipal perset output). (Note: many high speed Opto-Couplers will operate well above 1 mhz).
As Always: Thank you and have a great day. br549
-
And
For safety, perhaps you can digitize a recorded Tesla output and record it and use it as your source. This way you can vary all parts of the source signal (even mix them a multiple of times if you wish). I would think playing one forward and one backward and mixing them would produce a perfect null, but if you get ANY additional output it would be from where? For those of us who do not have a Tesla coil maybe you could post it in downloads for us as a .wav file.
-
I hate web browsers... I lose so many thoughts so many times.
Re akula's coil schematic;
what is Elk. magnet? does it just go to the chart? Ya, but the chart is 'bi-synchronization unit' which has two jumpers on it... I think that peice is missing schematically.
so the other end of 2.. is that just a capacitor? it doesn't have resonance? Is it just a stepup from (4)
3: output coil; located at intersection of 1 and (unlabeled, tesla coil)
1: interacts with (unlabeled, tesla coil), and I would assume (2) but maybe it's just the exciter (4).
- the aluminum forms a topload... which will be coupled with the capacitance of the (unlabeled)
2: again, is it just an LC tank? is it high resistance and low capacitance?
considering Dally's scheme; he has an LC tank; loop antenna, but this is only effective in the near frequencies... it'll fail as the system drifts, so probably this is a thing that should be added after; otherwise it's the intersection of a resonant tank of a stepup toroid and an inner coil, and the outside is a high potential pulse; when the load has a poor inductance matching on my mazilli I can get such a pulse. The pulse shows up as a postiive potential on all conductors in the area.... that is the other coils don't induce it, because both ends are both positive... and yes the scope probes themselves in the area also sense it, but it is more significant when attached to another conductor.... But both intersect on the output coil.
A) neither have a ferrous core.
b) a copper strip pickup and grounds that run through coils aren't required... Though a inductor passing through a ferrite tube does increase its inductance...
the copper is also (maybe) a single turn winding? It's not closed, and there's no connection except to the air, which is to the other tesla coil.... so it really looks more like a topload.
--------------------
highest potential, higher frequency (3x)
higher potential, frequency (x)
tuning the exciting side to the side it drives is also a +
------------
Having read eric dollard's books, lone pine writings, and the 4 quadrant theory thing, I have a better appreciation of the dynamics of this. He's a good translator between maxwell-steinmetz and me :)
I had this one mobius coil that was 4 layers.... it worked OK, but I really kinda didn't like it, like there was just something wrong with it. I think layers matter a lot in this case...
5 layers...
exciter, pickup, output, pickup, exciter
low inductance, high-medium inductance, low-medium inductance, high inductance, low inductance
1, 5, 3, 9, 2
dally would additionally include another stepup before 1...
1,10-1,5,3,9,2 (10-1 is in parallel, with a capacitor)...
I know I'm not making sense, just sketching an idea..... but really
1:x (out) 3x:1
Okay here's where coil dynamics confuse me.
X inductance is going to be less than the tesla's inductance. But yet, has a lower frequency.
The tesla's inductance is going to have a huge penalty because of length... but having a higher voltage, it's frequency is higher? but then specifically it's resonant frequency, which includes capacitive reactance, so I guess there's just a lot more capacitance on (1)
but then there's the consideration of just length of wire, which itself has a wavelength.... but again the longer wire in the tesla is going to be a lower frequency... so if I project multiple waves on the coil... so only a small portion at the bottom is induced with the secondary... then the ... stupid rotational phase thing can align on a higher frequency, giving multiple node points in the tesla tower... maybe a quarter wave of the quarter wave? It's driven not free oscillating...
---------
no words from akula in a while; did he run into technical difficulties? I hope all is well. I see others replicating too; this time I don't have a strong desire to be the first replication... but I think I can build a functional model... akula's system looks fairly robust; in that the logic follows the tuning, so having the coils, he should just be able to plug in the logic parts and demonstrate power? Maybe he waiting for a sufficient load?
Some of his last interactions, make me think that he's not actually the guy in the videos? he's questioning things on dally's and criticising other inventors instead of just going ahead with his own installation? I dunno I think too much probably; he complained that the content was pirated on stive's channel... or was he saying that he had pirated it?
-------------
I was playing with a particle simulation, simple gravity, electrostatic, magnetic behavior on particles... so I was modelling the magnetism, and playing with magnets, trying to establish the forces.... If two magnets are aligned with their poles to the north, and then offset so they can be passed by each other's sides, so the north is forced to remain up, the torque force increases, up to the point that the plane of the south pole passes the plane of the north pole... almost asymptotically but then starts to repel that pole instead of attracting the south to face the north, and a lateral translation force starts to apply more also.
Somewhat reminds me that when having a scope on AC, there is a spikey effect at the very top of the wave... but that's probably a comosite of all the reactance from the system... since most things are bridge rectified first, the 0.7V difference in switching time's... But maybe as the north and south pass each other there's a significantly higher force than would be expected.
If you use notepad first and cut and paste you will NOT be hating it as much. I do it for all my messaging systems since I too have had lots of "issues" losing the whole task way to many times. I use it for any website that has message posting and it works far better and consistently that those time out messaging utilities.
-
Parcial Quote
In a month I will be in my new house and I will be starting my lab up soon to prove all the nay sayers wrong. Akula has shown there is a validity to the process and we need to correct the problems with his system to bring it under control. One problem I see is the impurity of the spark gap, which is adding wide band interference from the transmitter. Adding a magnetic shunt to the gap should clean this up and turn the impulses into clean impulses.
I can kinda see why it would give so much "noise" with all the surrounding elements floating in the air turning to plasma. Without physical enclosure in a vacuum and magnetic full shielding you will have lots of noise mixed in the output signal.
-
that is nice schematic.c thank you for help.
I have much more to say but for now I'm so busy with other things
I'll be back soon with more
Wesley
-
For safety, perhaps you can digitize a recorded Tesla output and record it and use it as your source. This way you can vary all parts of the source signal (even mix them a multiple of times if you wish). I would think playing one forward and one backward and mixing them would produce a perfect null, but if you get ANY additional output it would be from where? For those of us who do not have a Tesla coil maybe you could post it in downloads for us as a .wav file.
Hope: Thank you for the input:
I talked to a good friend, who is heavy into creating, recording, and digitizing audio and music files with all the latest software and hardware. When I explained to him what I wanted to do, he looked at me like I had just fallen off the turnip truck. After some more conversation including it's benefits to man kind , I realized that it was going to be a very hard sell. So I guess I am currently doomed with continuing my original direction of monitoring the feed back signals with a microprocessor (and some interfacing hardware) and controlling some driver boards to do my present experments with manipulating the output signals.
I have finished the first proto-type driver boards. I am still testing and tweaking
the design (which I plagiarized most of it from someone else's design). I just basically added optical isolation to try and reduce noise returning to the processor. I did notice a couple of things about the output FET configuration.
1. The FET with the load connected to the source instead of the drain runs hotter that the one with the Load connected to the drain. I used the computer fan and heat sinks to keep them cool, Seem to do a good job as far as cooling goes. At 4 amps, the temperature stays around 120 degrees F.
NOTE: Preliminary testing of boards looks good. The feedback loop to the coil driver board is one loop of wire around the outside of the bifilar coil.
I am posting this information only as a part of a work in progress, and a idea generator, not as a final device that will produce free energy.
"My Ideas and work only" (OH!! and what ever I can plagiarized). As I stated earlier, I would love to see Akula or one of you guys go down in history as the one who gave humanity free energy.
As Always; Thank You and Have a Great Day. br549
-
Anyone: I was studying the latest post of Akula0083's circuit, and was wondering if someone would have time to translate the text. (NOTE: Attachment).
As Always: Thank You and have a great day: br549
-
#1 Just schamatic title;
Model No004 developed with the support ... (other names; no information just credits
(new line)
все права на схемотехническое решениия защищены
all rights reserved circuit solutions
Steho-Energy AG
#2 - (to? from?) ElectroMagnet (x alektromagnitu)
х алектромагниту
х электромагниту
-
Your efforts all here are tremendous and bravo to you all. I can see the output of a pinched magnetic moment being captured as the main goal of this circuitry. I have not built it, but realize it is important resistively to make the pinching coils match and the signal synced that is applied to them (goal being keeping the pinch moving and producing).
This video can explain much, I sense he is earnest in his efforts and has had success obtaining true results. (So he speaks from knowledge not conjecture as I am.) Akula has the same authority gained in the same manor, even though I do NOT understand his language I can sense his positive patterns of communication.
Once we get a induced magnetic pinch going, it is exactly the same moment we need to attract and capture it in the third coil. This is where your WORKING devices output will be measurable. Important, so important to notice at this moment you must either use that energy developed OR provide a drain and storage. My suggestion is use it all up and keep creating more. Personally I do not know how it could be saved effectively and it just might saturate the whole project causing a lack of potential difference. Then the device would appear to stop working, which is alluded to in the link.
Don Watson - Mike Watson - On the successful Replications of Floyd Sweet's VTA. - YouTube (http://www.youtube.com/watch?v=UVhGQaESKEI)
We are so near completion, of both the understanding the principles and the mechanism with which to enable the process it is amazing. Akula is having success, though I sense saturation hampers it at times. Have faith, this is very nearly complete. Thank you all so much for the mind bank and your time with equates to your life blood.
Richard Williams
-
Quote defined: Once we get a induced magnetic pinch going, it is exactly the same moment we need to attract and capture it in the third coil. This is where your WORKING devices output will be measurable. Important, so important to notice at this moment you must either use that energy developed OR provide a drain and storage. My suggestion is use it all up and keep creating more. Personally I do not know how it could be saved effectively and it just might saturate the whole project causing a lack of potential difference. Then the device would appear to stop working, which is alluded to in the link.
How do we attract it? We keep the third coil as a place of potential difference that I think (maybe not magnetics like is commonly described now days) but as a sum of what is produced in the circuit needs to be attracted with a placed that will allow them to flow. In such a perfect sink it would have all the elements of the created energy in a much lower pressure. This will allow the created energies to be attracted. Think of the energies as under pressure greater than normal seeking to balance that pressure. Work load that "matches but opposite" the energies created. Balance, nature seeks this natural law.
-
Re: high voltage pulses by Hope
That reminds me of another observation I made that I couldn't make use of.
While working with these mobius coils. I had it working with an asymmetric load, and one load was high voltage. If that was left open, the pulse created (in many 10's of microseconds) was observed with on oscilloscope as a positive potential developing on... basically anything the probe was attached to; and on a 10x probe setting, was 10V just laying on the bench.
While experimenting with that neon pulse thing from Energy Amplification thread, the first pulse on a secondary winding is measured with independant probes, and both sides go to a positive potential first... then one side continues, and the other bounces back to ground...
(a bifilar coil, with a signal generated connected with potential and ground to one, and scope probes attached to the other filament's ends, and probe common ground back to the ground side of the primary)
-
that is nice schematic.c thank you for help.
I have much more to say but for now I'm so busy with other things
I'll be back soon with more
Wesley
Instead of all this signal generation device, can we not just digitize the signal and exclude 2/3's of the circuitry?
One good outcome was the output signal from this is it cleaned (rattled) my flue pipes without the taking them apart. Though I did have the whole loose creosote from all the pipe fall into my stove. This was easy to clean out, thank you for a side benefit!!
-
I was studying Akula0083's latest posted controller and could not find a local (USA) source for the (K555TB9) flip-flop (chip), but was able to find what I think is a suitable substitute, which is a 4027 Dual JK Flip-Flop. Below is some information on both chips. I'm just presenting this information for review, in case I am missing something, or if anyone has another alternative or suitable substitute.
(NOTE) Of course the pin assignment locations are different, but I look like both chips function the same....?
As Always: Thank you and have a great day. br549
-
I was studying Akula0083's latest posted controller and could not find a local (USA) source for the (K555TB9) flip-flop (chip), but was able to find what I think is a suitable substitute, which is a 4027 Dual JK Flip-Flop. Below is some information on both chips. I'm just presenting this information for review, in case I am missing something, or if anyone has another alternative or suitable substitute.
(NOTE) Of course the pin assignment locations are different, but I look like both chips function the same....?
As Always: Thank you and have a great day. br549
THe logic table loooks different. R S and So and Co are marked as H H and L L with the transition chart.... So I think one's backwards... inverted
-
I was studying Akula0083's latest posted controller and could not find a local (USA) source for the (K555TB9) flip-flop (chip), but was able to find what I think is a suitable substitute, which is a 4027 Dual JK Flip-Flop. Below is some information on both chips. I'm just presenting this information for review, in case I am missing something, or if anyone has another alternative or suitable substitute.
(NOTE) Of course the pin assignment locations are different, but I look like both chips function the same....?
As Always: Thank you and have a great day. br549
Hi-There
Use 74HC112,54LS112,74LS112-depending on your PCB rail power- it is Negative edge trigger JK Flip Flop and exact pin configuration as K555TB9
Hope it Helps
JJ
-
Hi-There
Use 74HC112,54LS112,74LS112-depending on your PCB rail power- it is Negative edge trigger JK Flip Flop and exact pin configuration as K555TB9
Hope it Helps
JJ
Thank you: myenergetic and d3xor for the information and feed back:
I think that I am going to try to do a board layout and build, but wanted to be reasonably sure that I had, or could get all of the components first. I will post the layout when I get it done.
As always; Thank You and Have a Great Day. br549
-
Anyone: I was studying the latest post of Akula0083's circuit, and was wondering if someone would have time to translate the text. (NOTE: Attachment).
As Always: Thank You and have a great day: br549
The top circled text says "Model number 004 was developed with the support of engineers and experts "Public Research Branch 'Nuclear Technologies Park"All rights reserved schematic solutions" and the small circled word is "electromagnet". This is based on using an OCR program that can read Russian text and using Google translate.
I missed a post that someone else had already translated that ... oh well ... it's a confirmation. ;)
-
The top circled text says "Model number 004 was developed with the support of engineers and experts "Public Research Branch 'Nuclear Technologies Park"All rights reserved schematic solutions" and the small circled word is "electromagnet". This is based on using an OCR program that can read Russian text and using Google translate.
I missed a post that someone else had already translated that ... oh well ... it's a confirmation. ;)
:) it's a fuller translation. translate.google.com has an option to show a popup keyboard, so I just clicked the characters :)
-
I should relate this story, it has bearing on the topic. One day I was called to Dalton Studio years back. They had a problem with their main sound system. I could feel the pressure waves while the test tones were in playback, BUT the sound was missing. It was a simple matter to scope the outputs back to a phase miss match. But it does show us something important here. That mistake was making the channels cancel out each other except it could not cancel the pressure waves. We need to answer why. I feel this circuit is doing a similar action and that is its purpose. To cancel out the creating force, but not the resultant action. Maybe we call the result resonance or something not even known now days or given a name due to state of the art theories have strayed far from seeking this type of output. I don't know what to call it, but it is sensed and creates or reacts with something to bring about energy output. If we are afloat in a sea of energy, we need to secure our ship to a place so that sea flows around us and then we can sense its passing by. Like a anchor line to the shore. Or even somehow to row against that sea, a motorboat can use its motor to do this. I hope this circuit is doing something equivalent to pushing or pulling on this flowing force. Any positive thoughts would be appreciated.
-
Attached is a circuit board layout of the latest (Akula0083) driver circuit shown on the previous page (#7). (with the 74HC112 chip). I could not read several of the parts designations' so I left them blank, but the circuit path layout should be correct, although if you intend to use it, please double check it before hand.
I used the 460 FET's, but you could use others with the same pin configuration.
As Always, Thank You and have a great day. br549
-
New video from Akula.
A German friend has visited Akula and thinks that this really is genuine...
https://www.youtube.com/watch?v=oWWXNwpEwsk
Enjoy !
Regards, Stefan.
-
hartiberlin
Because of the vast improvements in battery technology,you can't rule out a hidden battery or hidden grid wire.Akula(the sharkhead) uses an output that uses high frequency
this has a strange effect on filaments of incandescence bulbs,this also causes errors in power output.It seems that Russians like to fake things,they also think Tesla is a god and heroworship him,hes arrangement is a Tesla like device with a ground wire.
I think its total hot air,anyone checking any of hes devices needs to do a extensive check for hidden batteries and hidden wires .Since you were in the tpu threads
in the past,you know there were some fake tpu's replications, most simply didn't work ,today there a constant flow of fake devices the majority created by Russians.
Do not trust Russians bearing gifts!!!
check!check! check!
-
New video from Akula.
A German friend has visited Akula and thinks that this really is genuine...
https://www.youtube.com/watch?v=oWWXNwpEwsk
Enjoy !
Regards, Stefan.
Hey Stefan,
Is your friend Arthur Tränkle from Steho Energy AG (http://www.psiram.com/ge/index.php/Steho_Energy_AG)?
I hope this does not spell the doom of free distribution of information if this is true?
I have to ask as some have pointed this out elsewhere and some are wondering.
All the Best
Chris
-
re pot transformer
https://www.youtube.com/watch?v=Lpx1SJdXnmo
the foil windings are open on the far end, and are wound counter-clockwise to the other coils (sort of)
The foil windings are both connected to the s(econdary) coil
layers: s-foil s-coil p-coil s-foil
p(rimary) coil is higher inductance (5.3uh vs 1.2uh) so it's a little more than double the windings
Laser saber's work... (https://www.youtube.com/watch?v=-D_Wkxht6dA)
Laser saber's schematic (http://laserhacker.com/?p=396)
-
@br549:
Nice work on the circuit board layouts. I am slightly troubled by the relatively large distance between the Gate protection Zeners and the mosfets themselves. For these protection Zeners to work best I think they should be as close physically to the mosfets as possible, with very short heavy traces connecting directly to the Gate and to the Source pins of the mosfet. Just as shown in Akula's schematic: right at the mosfet. Also it's a good idea to incorporate some kind of socket arrangement for the mosfets and these Gate protection Zeners, so that they can be changed out easily when they blow.
The IRFP460 is a workhorse. I use a single one, with the same 18V Gate protection Zener arrangement, for my SassyClassE SSTC.
-
Some translated schematics; had to guess a little; for example what is TT? Volume? Vols? Comarade?
Most of the component values are roman alphabet already; going to work on the coil specific; lots of text there.
TT is Tesla transformer or like in english mean Tesla coil.
-
I hate web browsers... I lose so many thoughts so many times.
Re akula's coil schematic;
what is Elk. magnet? does it just go to the chart?
Elk. magnet is electro magnet. It probarly not nessary.
-
#1 Just schamatic title;
Model No004 developed with the support ... (other names; no information just credits
(new line)
все права на схемотехническое решениия защищены
all rights reserved circuit solutions
Steho-Energy AG
#2 - (to? from?) ElectroMagnet (x alektromagnitu)
х алектромагниту
х электромагниту
К электромагниту means to electromagnet.
-
I combine two schematics, maybe be clear that to that conect.
-
So what is the work that the extra single-layer foil/plate transformer winding is used?
hmm that came out badly; who's work is that based on?
what's the principle? ?the 'ray' impact field that tesla noticed?
what term would be good to search for?
I feel I should say on my prior picture of the winding of the coil, the bottom/inner plate is drawn backwards, it should go up round back not down around front like it indicates...
Akula had that on the original plans in bigger
I've seen the split copper pipe used in kapagen setups...
I went back to roman's channel; but all his videos were deleted... thre was a diffierent video that stive didn't translate; it was after the pot transformer he was using a flyback ferrite; but that lacked the plates... same driver board (maybe there is one with a flyback I remember that being unwound too)
-
Here I translate. :)
-
Back to your post on page 1.
Snipped......
I also do not see our hero being so good for us to say something at all.He is young, and misleading if there is in his direct interest. inconsistent in his statements, adjusting himself to changes of situation , trying to learn how the system work, - he has it but he has no
explanation for what he got from it.
Hahaha. Maybe I should publish a Russian text on Spin Conveyance. It would help him understand his system so he can stop giving out illogical explanations, bad "schamatics" and stop pushing group efforts in so many wrong directions.
He is improvising.
The pump phenomena - part of his explanation is about right. NO it is not.
I see it as good explanation for the present time as we do not have anything on hand.
How can telling lies and showing disinformation "as a good explanation" when every damn day groups are led in 360 degree directions following lies. Better he just collect his million dollars bounty and then just shut up and disappear. This way we can all go back to our own works without his "tantalizing devices" being flagged in our faces. As OUers, we are like Piranha waiting for a cow to fall into the river so we can gobble it up in a few minutes. It is our nature to be inquisitive and this nature is also our greatest flaw and guys like Akula are just taking advantage of this without any afterthought of the true ramifications. He is just spewing it out, one device after the other and in the end, none of them mean anything because none of them can be replicated, studied, measured, hence none of them will ever be understood. Just more eye-candy spiked with Arsenic.
But also famous yoke..............
somehow omitted in all of his talk and still present in the device.
Think guys
You are asking us to think. Think of what? What part of what he shows in device, that does not concord to schamatic diagrams that omit components or change components and in all having over 20 variables. So think of what, how to play the lottery will provide better chance then to think about his own disinformation all in the name of money and fame. He is taking the wrong approach. Let's say within 30 days, we will have the answer to OU and then he will be lost in the melodrama on the worldwide OU effort as "He who showed and said so much, but said so little". He will lose his only chance to have his name live on after him. The chance will end soon once someone else comes forward that cannot be bought.
So what is that he wants? :
He needs certain credibility to attract investors if any.
So he needs public approval.
Is that wrong?
NO it is not.
Yes it is when it influences others and their actions. It's called lying.
Who gives anything for free.........................to anyone.......... who?
Hmmmmmm. Did his mother charge him for carrying him 9 months? Did this planet charge him for providing all he needed to survive? Did all the people in this world that have less then a 10 year old toothbrush to their name?
It is only Wesley and Arunas and Tiger and few more ........ idiots?......... maybe not so..................
Are they so good for you guys..............so human?............ so stupid?...................
So stupid is the best word to use because they think they will change the world using standard methods but they do not realize that the standard methods were derived to prevent change. Call it Standard Checkmate. hahaha
So if you listen to them they say :
No they are not..................
They have no choice as well. They know that giving is to humanity is the only way to make money on it as well.
That is why they stand that energy belongs to humanity all bad and good at no distinction .
You start firs you sold 1000 devices in one day, so is other guys as well..
What's wrong with that.
there are 6.8 billion peoples in the planet earth. Who cares about competition.
What is really that you need to be happy.
House, no debts, and some little money for comfortable tomorrow . That is all.
If you guys think different than you are not in my coffee table.
We get involved in the existential arguments like this all the time. Basically, all the inventors have failed in one major respect that has held them back and made them disappear. Their own personal lack of trust in the real humanity in simple people. All they concentrate on is thinking that Mr. Money has all the virtues. Mr. Money has nothing more then shit for these guys. He does not care about them, or the world, or the people living in it otherwise he would be the first to say - "let the people know about this without delay". But our valiant, sharp and advanced inventors think of Mr. Money like their God, their savior. "Wow, once I get that Money for myself, all my troubles will be over". Yes they will indeed be over because you will no longer be allowed to tell the truth to anyone, so better you just shut up and crawl back into your money hole and not waste peoples time with all your disinformation.
All we as eager OUers can see is another smart guy making the wrong decisions because he thinks Money is the only answer.
Tell me Mr. Inventor, how would it feel if you walked out of a plane to a new country where there are journalists, scientists, engineers, mothers, fathers, children all standing on the tarmac waving and shouting your name with so much happiness and trust in mankind. So, how much is that worth? Nah, come to think of it that kind of talk is for real men and not smart mice.
Wesley
@stivep1 @wesley
You are what I consider someone of selfless abandon and true intent with the kindest heart and deeply logical mind. I like to think of myself in that way as well. Knowing this, is permitting a young mind to continue lying to us is the right thing to do when the consequences are so widely known as a major waste of time.
We start a project and soon enough we realize we have been lied to. Devices do not follow schamatics and then we are asked to "understand what". Understand that this young mind is lost otherwise why would Akula think that telling lies is OK. You have to have a very very very good memory to be able to lie and then remember all your lies. But for Akula, it's easier to just forget the last device/lies and move on to the next, never looking back. So you think that is OK?
I think as seniors in the humanity department, our role is to make them understand that lying is not the way to achieve his goals. That lying only hurts everyone. That it is better to stay silent then to lie every damn day of the week because, this has now become his own daily mindset . Without knowing it, this device is changing who he is, how he acts, what he considers as honest only to himself justifies his lying to maintain what?
You see the quagmire we have to live with every damn OUers day. We have not only to support and inquire the mysteries of energy but we must support a backpack chock full of ancillary equipment, the heaviest being a lie-detector.
The craziest thing is we support these inventors to lie to us. We follow their devices, their plans, we ponder them for hours a day, day after day, for what? Because they have been perceived to have something we do not have - FE. Instead, we do not have the guts, the courage, the logic or the leadership to let it be known to all that "If you do not fully disclose to humanity - then there is no room for you at our table. Go eat your Money so a mouth full of money will surely help shut it up instead of spreading lies.
Frustrating as it may seem, we still are here and we still want to find a solution for the world. But one day even ourselves will have to stand up and be real men, with real convictions and then we must stick by them no matter hell or high water. Then these money incentivized and lost masterminds of our civilization will realize, there is no exception then to provide this type of device free to the world and trust that the world will reciprocate in kind. So in effect it is our own combined weakness that provide the fodder to these younger minds to think "Hey, they liked being lied to so it must be a good thing".
As usual, sorry for long post.
wattsup
-
Wesley understands the situation. Follow his lead and you will do just fine.
That said, we have all been indoctrinated by the shark. There are probably some things we have seen that mean something though we have no understanding what it is we are really looking at. We have probably all looked at similar devices, Melnichenko, Don Smith, Tesla, Steven Mark, etc. Those imprints sit in our minds. We must let them stew a while, because I have a hunch the secret is there. One of us is going to have that ah-ha moment and try something off-the-wall and it's going to take us to the next step. Don't ever discount how powerful, creative and intuitive the human mind actually is. Simply have some patience and do not give up. We still have a way to go before there is a simple, step-by-step assembly manual for a device that works every time. It's coming though. When I do not know, but as long as people stay focused, engaged and let their minds churn through all the material, there is no stopping a solution. It's actually quite a fun little mental exercise to think about all these types of forums popping up a real working device within days of each other. We can do this. There are too many of us and too many ideas on the table for the odds to not be in our favor. I do feel for the poor bastard that tries another Roman stunt on us though--tar and feather will only be the first day...
-
As strange as it might sound:
You try to believe in something or somebody and somehow it always turns-" not so, or not that so" good for you.
TK never kept his word.
Lie is not so bad when used for good reason, and serving good matter.
But it is never good when lie cost you life.
At first I was scheduled to die as president of my own scientific entity that was located in WTC1
in 9/11
Than:
I was suppose to die after TK have met me in Prague.( on my way to Tbilisi)
Now after years I say:
His (TK) "friends" have always been not technically oriented for purpose .
TK signed contract with L...a the cholade company in Latvia. ( Riga)
owned by former Russian singer (* the lady).for 30k eu.
I was denunciated by one TK closest friends -the one who have been with TK in the apartment in hotel Opera, and he was double agent working for TK and for L..ma (pseudo "David", real name : Shota).
Shota was paid by L..ma (behind TK back), to keep eye on TK.
TK called me because He was to meet with another guy in Prague and I was a good to be in Prague at the same time.
I have met this gentleman( potential investors rep) few months later he also conformed that TK chosen me as better option but I was not primary reason for TK travel to Prague.
For TK I was " potential lift to America"
So Lai.a send their guys to prevent american to mess up with their business.
Later Shota has asked me to give him financial help because his daughter is in hospital and she will be thrown out if he does not pay. And he admitted that he is sorry for what he done. He did it because he loves his daughter.He did not wanted me to be poisoned. ( I have document of money transfer)
Despite what has happened I have send him the money.
It turns out that he lied to me.
He never have any daughter at all.
The conformation of this lie - from TK son.
TK ticket and all expenses have been paid by that entity.
As professionals they have been good in doing good poison.
But talking about me:
They did not do a good job and now there is one more guy who once not totally dead found that he has not much to lose any longer.
So the mission becomes more important for him,as he must die anyhow... so what is the difference...
Well difference is finish the job.
Some of you might say it is just by accident as my pay-back
to that fricken system
beneficial also to all humanity,
I'm not a hero, actually I'm anti hero,
I'm just the guy who got a trauma in the plane losing conciseness after eating some cookies.
Trying to figure out what to do next ?
How to save myself ?
Is that possible?
Will I be able ever to pay back if I die?
Friccccken pay back.............
Just pay back/...................!!!
Two fingers deep in your mouth......yes.......
Water .........a lot of water.............
The fricken plane did not have that much water..........
just ugly taste .......I was pushing the toilette sink handle hundreds of times. (Stewards , yes that was some help.)
How fricken nothing human life for some people means.
Fu.k!!!!!!!!!!!!!!!!!!!
So everything I do right now is to be just side effect of it.
That is all.
Does that help to one to understand what I'm coming from? And why I'm so much screwed up?
Wesley
-
Does that help to one to understand what I'm coming from? And why I'm so much screwed up?
Yes it explains many things.
Screwed up?
No.
Messed with?
Yes.
The table will turn.
They need us far more than we need them. Soon they will realize this fact.
As side effects go, this one will be worth watching. Even better to join.
M@
-
Hey Stefan,
Is your friend Arthur Tränkle from Steho Energy AG?
I hope this does not spell the doom of free distribution of information if this is true?
I have to ask as some have pointed this out elsewhere and some are wondering.
All the Best
Chris
Yes, it is Arthur Tränkle from Germany.
I just learned him to know, cause he was in one recent video with the 2 LED circuit from Delarmorto.
So better say it is a new acquaintance.
I got the video from him.
He has good contacts to Russian inventors and was himself already defrauded
by some fake circuits recently, where there were hidden Li-Ion Batteries in the cooling
case hidden, so he lost a big sum of money by buying the prototype.
Don´t believe too much what PSIRAM writes, these are professional skeptics who are getting paid
by somebody and hide their own identity...
Regards, Stefan.
-
Yes, it is Arthur Tränkle from Germany.
Stefan,
Has Arthur put restrictions on what Roman will be allowed to share?
It was my understanding that Roman could continue with small demonstration units since the underlying technology wasn't invented by Roman. It would be good to know the agreement between Arthur and Roman so that when we have an opportunity to interact with Roman, we know in advance what he can and cannot comment on. This is a bit of a sticky situation because the concepts can scale to higher power devices which Arthur may want to keep private. However, without a firm grasp of these concepts, replicating even a small power device may be difficult since tuning parameters require an understanding of the overlying principals.
Anyway, if you know or can find out Arthur's position, that information will be of great benefit to the community here.
Thanks much,
M@
-
Good Afternoon people,
Its my first time over here, and this is my post, I came over here and registered into the site after seeing the video of A "Free Energy Device - Akula 1 KWatt Unit - no fuel needed - just a ground cable - https://www.youtube.com/watch?v=oWWXNwpEwsk"
I'm a normal person not into electric engineering but I'm really disappointed with out local electric company, they are vampires.
I wanted to build a pastry workshop, and that needs a different type of energy than the one used in ordinary homes, and they asked for 35,000 US Dollar for the installation process they said, that in addition to the tools i need to connect the workshop into the grid, and internal work after it.
in addition to that, using their electricity really costs, I can't afford this, in addition that I noticed in other places the same company doesn't ask for any installing fees, not at all, i was shocked, because the municipality over there commanded them to do so, because after all the user is paying for the electricity.
I know about Tesla and his device, and I was amazed about the video you made, I tried to contact local Electrical engineers, and I was unfortunate, they are more likely to stay with what we have and not working on new things or create such devices :(
only one guy from my area said that he would help in calculations but not designing the device, so i jumped over here to talk to you people.
first of all, in my humble opinion, if this device worked on a small prototype it should work on a big size generator right?
can you provide me with designs or something that i can get use? and in case I want to use this device to run my home or workshop, is it possible?
I was thinking about using solar panels, but that doesn't help as well :(
waiting desperately for your response :)
regards
Saher