Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Stivep1: Tesla Rehash (Akula device)  (Read 172517 times)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #45 on: November 02, 2013, 03:31:13 AM »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #46 on: November 02, 2013, 05:29:17 AM »

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #47 on: November 02, 2013, 07:47:09 AM »
Thank you again, kind sir :)   (Did you mean to make the second one private?)  Given the disclaimer of potential desync it's not so bad... I got the idea of what the circuit is meant to do on that side; but that's only 2/3 of it :)  I know I'm impatient...

signal tracking with a time skew... with a lowband and high band limiter....
the  drive should probably be at the opposite side from where you take a load? or both?  I think a royer oscillator would track similarly... more of an analog solution


but I'm finding local parts that can build this...


NTE74HC14
http://www.frys.com/product/1003633


NTE4046b
http://www.radioshack.com/product/index.jsp?productId=13076432


(Not this one; it's just an output driver module... 10-20V logic input)
http://www.irf.com/product-info/datasheets/data/ir2111.pdf

the output module is really rather complex... uses 12V to drive a coil to drive mosfets that drive 24-220V rectified power input across the real inductor...

This probably lays out on a board pretty well; need better package for power drive :)


(sorry if I'm interrupting and edit in progress)




d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #48 on: November 02, 2013, 09:30:51 PM »
Tracked down some more information; from what I gather There is an important concept from


(Tesla 7 N. TBSLA. ELECTRICAL TRANSFORMER OR INDUCTION DEVICE. )
 delayed induction by iron layers between primary and secondary; Assuming a direct induction to get the current rather than a delayed effect from collapse of a field ....


Akula's thread, locked from public comment, which is probably for the best :)


Was reading some of the other comments, and there's fools posting to him that his machine doesn't work; and that the coil ideas are bogus.  Crazy.  I'm impatient though, where's the receiving half? 

Like this schematic still requires a 15V and 24-220V input..... But I recall something about 3 parts so I guess I'm impatient :)



Schematic updated transaltion; this is one version; but the other has a 555 timer and override IR2113 driver attached for start/stop circuit


The other had better text than this one; just fixed TT translation and a few minor things.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #49 on: November 03, 2013, 12:56:18 AM »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #50 on: November 03, 2013, 03:34:26 AM »




 http://youtu.be/SS_CsCX2SHc


Wesley&John:About Akula,LithuaniaExperiment,Rossi


I hope you will find it  educating and interesting as well. There is some addition to understanding How Akula works plus new light on the general subject.And for these who  is looking for easy free food - sorry if you do not  read watch and learn - you last in the row of potential benefitsiants  .
 





Wesley






d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #51 on: November 05, 2013, 05:05:28 AM »
So I was going to go about implementing this and there are subtle differences in the schematics so I guess it is the complete picture.  Although both sides are the same PLL and phase advance(retard?) logic with subtle differences in frequency range selections and sources of inputs...


in the latest videos, the tall white coil will be the receiver, and the extra windings at the bottom are where the load will go.


It(receiver) resonates at a base frequency at 1/3  (50Khz not 150Khz).  The transmitter resonates at a higher frequency.  It looks like both are driven to their own resonant frequency;

The capacitor across pins 6,7 on CD4046 is 1n on the receiver and 2n on the transmitter.

On Trasnmitter there is an additional transistor KT503(?) on the transmitter to drive pin 3 on CD4046; on the receiver pin 3 goes to pins 4 and 5 of 74hc14; on transmitter pins 4,5 of 74hc14 are only connected to each other.

on transmitter capacitor to pin 9 of cd4046 is 240n instead of 100n(receiver).


the drive to pin 14 is handled differently (block change) (block change 1)

On the receiver there's an extra diode from pin 7 to pin 1 of 74hc14

on receiver resistor from pin 13 of 74hc14 is 10ohms; on transmitter it is 5 ohms

on receiver pins 9,10 of 74hc14 gots off schematic to a jumper and to coil diagram

(block change 1)on transmitter pin 9 of 74hc14  goes to IR2111 mosfet drive
        pin 10 of 74hc14 goes to the transistor to pin 14 of cd4046

(copy and paste includes a size change for some reason; maybe I have my page zoomed)


So they are not the same schematics;   the transmitter is mistranslated as a title, and is the one with the K555 (555 timer) the receiver is the one without the K555.




stray thought: so this is actually a good schematic to represent John hutchison's effects; He claims to use 2 tesla coils and a static field (van degraff) at interfering frequencies; and these are more about keeping the frequencies the same..... John huchison's work was utilized by ken shoulders to create EVO (exotic vacuum objects),  which is similar to mark leclair's cavitation process... 




NMR?  maybe sorta... in a sense there is a relatively static field and another field moving through it... (a 1/3 wave is almost static compared to the 3x frequency moving through it... ) not at right angles... could be built at right angles...


Caduceus coils; none in this case... they do have frequencies where they apparently consume power, resulting in potentially a voltage sink, which should be continously satisfied by ground as a working theory.... but I don't see any such interfering coils here, they are all concentric.


what probably happened with the nano pulser in dally's gear is that it triggered a feedback wave and resulted in continuous avalance motion of the transistor... which would be in sync with the driving pulses; especially at forced resonance, the reinforced wave would exceed the collector making it not a GNSI but a phase regulated high voltage wave...





















stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #52 on: November 05, 2013, 05:57:33 AM »

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #53 on: November 07, 2013, 11:05:23 PM »

I don't know if you've been following this guy... 

http://www.youtube.com/watch?v=a5aajLyTHjI


Probably not a lot of new perspective but is another work in progress.




stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #54 on: November 09, 2013, 06:59:22 PM »

Quote
d3x0r


I don't know if you've been following this guy...  http://www.youtube.com/watch?v=a5aajLyTHjIProbably not a lot of new perspective but is another work in progress.











thank you my friend for information. I did not  but I will now :)






http://www.youtube.com/watch?v=x67q0WOcXCg&feature=youtu.be




http://www.youtube.com/watch?v=mPAd-VTHjfs&feature=youtu.be






http://www.youtube.com/watch?v=K5NnXOHb0Jc&feature=youtu.be










Wesley

baroutologos

  • Hero Member
  • *****
  • Posts: 918
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #55 on: November 10, 2013, 01:31:35 PM »
I was experimenting with a biffilar coil of mine, running it in a Kacher mode, and saw that 200 turns or so one layer in 50mm diam, 24awg enameled wire and runs at a frequency of 2 Mhz. (interwinding capacitance must be in the range of 5-6 nf)


How that acula biffilar, of 100 turns 16? awg insulated stranded wire over a 100mm PVC tube connected in biffilar mode can have a fundamental? frequency of 75Khz?
Sounds weird.
« Last Edit: November 10, 2013, 11:52:10 PM by baroutologos »

br549

  • Full Member
  • ***
  • Posts: 122
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #56 on: November 11, 2013, 07:16:37 PM »
I also used enameled wire (#25.5 awg) to wind a coil for testing. The below attachment shows my preliminary testing, which was done with only the bi-filar coil. I was looking at the system drawing on the previous page that shows a magnet coil and a split aluminum tube. By the way they are illustrated, I am assuming that they are below the bi-filar coil. I am thinking that they will reduce the resonant frequency, but not sure until I build and test. The magnet coil rings a bell in reference to Kapandze device. I remember reading an interview, and being ask, 'what would happen if the ground was disconnected while the device was operating'. He said that it had happened once, and caused damage to the magnet coil?
[/quote]

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #57 on: November 11, 2013, 07:56:12 PM »
I also used enameled wire (#25.5 awg) to wind a coil for testing. The below attachment shows my preliminary testing, which was done with only the bi-filar coil. I was looking at the system drawing on the previous page that shows a magnet coil and a split aluminum tube. By the way they are illustrated, I am assuming that they are below the bi-filar coil. I am thinking that they will reduce the resonant frequency, but not sure until I build and test. The magnet coil rings a bell in reference to Kapandze device. I remember reading an interview, and being ask, 'what would happen if the ground was disconnected while the device was operating'. He said that it had happened once, and caused damage to the magnet coil?
I don't understand what you mean by 'a magnet coil'

br549

  • Full Member
  • ***
  • Posts: 122
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #58 on: November 11, 2013, 09:49:33 PM »
I don't understand what you mean by 'a magnet coil'

d3x0r:
I'm not exactly sure why the two coils of the magnet coil circuit is connected the way it is yet?
aAs Always: have a good day

Hope

  • Hero Member
  • *****
  • Posts: 701
Re: Stivep1: Tesla Rehash (Akula device)
« Reply #59 on: November 11, 2013, 10:32:22 PM »
This topic is great and I want to watch it all closely.


I found an oddball link and who knows if it is real.   What matters is the theorem presented on it supposing it is the basis of Tesla's work. 


Looking at this topic here and thinking about the links info I am posting.  I remembered a device that passed a signal through an ultra-violet bandwidth and the results were reported as a beam that could disintegrate even concrete and metal.


  [size=78%]Nikola Tesla's "lost" theories[/size]


Having the device presented in this topic as the producer of material that attracts the aether then bumping it to produce the so called smoke ring makes logic of what Tesla's work could be all about.   I really don't know about the in's and out's of all these devices,  but the mechanics all seem to be correlatable to the "ink ring" underwater maker.    I hope some comments on my thoughts come forth.  I don't mean to distract at all here, only add some understanding to the mechanism which may being employed that truly is causing the reactions we can measure.