Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719901 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17460 on: July 03, 2017, 05:43:19 PM »
  Itsu:
  What do you think about this new PWM. It's cheap, and has up to 100% duty cycle controls, not just the 47% duty cycle.
It also comes with both duty cycle as well as the frequency trim pots. So, unlike the one that you tried out previously (now only $5), this new one (for $7, with free shipping) doesn't need to have the addition of the duty cycle controller pot.
So, the one (below) comes ready to use.
  Seams like the way to go.
   Your thoughts...

https://www.amazon.com/ShineBear-Controller-Adjustable-Frequency-500-100kHz/dp/B0711BW7QZ/ref=sr_1_fkmr1_2?ie=UTF8&qid=1499011437&sr=8-2-fkmr1&keywords=TL494+circuit+board

   https://www.youtube.com/watch?v=UjoA-d_b3DY


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17462 on: July 03, 2017, 07:40:54 PM »
  Ed:
  Thanks for finding that same board at 1/2 the amazon.com price. I did check ebay, but did not find it at that low a price. Thanks, again.
  So, it seams like a waist of time, now, to build these types of TL494 boards up oneself. As just the cost of buying the component parts at retail prices is higher than these ready made boards. Not to mention the time that it takes to build it, and get it working properly, with no glitches. I'm not a good example, as it takes me way too long to get it working right. Although I think that I've got it working properly now, at least the TL494 circuit, and the fet drivers.
 
  There are lots of new high tech circuit boards coming out lately, cheaper than ones that can be build by oneself.
Such as the step up or down DC to DC converters (92% efficiency). And the fast switching rectifiers boards, or the 110/220 to 24v PSU, etz. Ideally to be used instead of our home made contraptions.
Thanks to China.
 
   I've also been looking for a ready made TL494 board with fet drivers installed, as well. Maybe someone else has better luck at finding something like that.
 
    I can imagine that soon we'll be able to buy a self runner from China, or somewhere else. At a lower cost than what we can build ourselves.
  These self running (from the surrounding ambient) type of technologies can't be held off by the oil and power companies, for much longer.
   Not to mention what is being currently used in the secret underground bases, deep space power units for satelites, or for the already built bases on other planets. As most everything we hear from the NASA are nothing but lies.
 
   Think about how the Pyramids and underground cities and their secret underground passage ways were lit up, with no carbon deposits from burning torches or fires to be found, anywhere. And the huge 100 ton rocks that were perfectly cut, transported, and set up in most all of the pyramid temple complexes world wide. Such things can't be done even today.
   
   Possibly this type of newer nano technology came from ETs, as well. Some of them may have millions of years advantage over our current available technologies. So, we have a lot to learn from them, if we just stop trying to shoot or zap them down with Tesla's EM beam weapons, at first site.
   Even though we have progressed more in the last 100 years, than in all the previous ages combined. But, we still have a long ways to go to catch up with the thousands of types of space ships and their types of alien technologies, that are currently flying in our skies around the planet, daily. Such as what is being shown in the link below, some of them even landing on our planet or in our seas.

   https://www.youtube.com/results?search_query=ufo+sightings+2017

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17463 on: July 03, 2017, 08:55:05 PM »

Hi Nick,

yes looking great, especially for $3.71 with free shipping.

But it has the same functions as the one you have as the 100% duty cycle is only when using single ended operation (no push pull which we need to have).
In push pull mode (pin 13 select) this thing also goes to 47% duty cycle max.

The 5V output looks somewhat minimal, but with MOSFET drivers inbetween should be enough

Anyway, go for it, if you want.

Regards Itsu

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17464 on: July 03, 2017, 09:05:36 PM »
  Itsu:
  Thanks for checking it out.
  In the video and specs it shows it running well on 12v, also. So not so limited.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17465 on: July 03, 2017, 10:23:49 PM »
How do you  use that ready TL494 board in push-pull circuit ? I see only out Out pin ?


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17467 on: July 04, 2017, 01:48:33 AM »
I'm waiting for this one http://www.ebay.com/itm/TL494-KA7500-DC-9V-25V-Driver-Board-DC-DC-Converter-Inverter-Boost-Module-PWM/181449170972?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

  Forest:
   If you are going to use it for part of the push pull circuit, you may be able to get by without adding the duty cycle trim pot. It can always be added to the little circuit later, if needed, also.
  Did you see Itsu's video showing how that board works? 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17468 on: July 04, 2017, 02:48:10 AM »
Sergey's original test rig PCB using the TL494 device with dead time Pulse width and frequency control you can find the original data on this tread only look for it some where around page 200 ish and Sergeys down loads, it's standard design.  If any one is interested i can up load the PCB design file.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17469 on: July 04, 2017, 02:56:54 PM »
Sergey's original test rig PCB using the TL494 device with dead time Pulse width and frequency control you can find the original data on this tread only look for it some where around page 200 ish and Sergeys down loads, it's standard design.  If any one is interested i can up load the PCB design file.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17470 on: July 05, 2017, 05:45:38 PM »

Why ? It's nothing important, pure speculation about hidden batteries in kapanadze green box. We all know that it's not possible, because of older video with the same coil

Not possibe - Really!  ??? Like Alien, I would like to listen to a translation of this video. Hopefully, Wesley will show interest in doing this.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17471 on: July 05, 2017, 11:51:43 PM »
   Well, perhaps the Brazilian guy that bought that particular green box device should be the one to ask how well those hidden batteries have worked out. As it looks like they still are working quite well after all these years, from what can be seen on his video.
   Maybe T-1000 can let us know if there is anything new or interesting to be concerned about.

   I find it amazing that the secret can be kept up for as long as it has, from such a simple device made out of junk parts. And that we still don't know who actually built that device up, along with all of Tariel's other much more complicated devices. I'm still betting that it was not TK, nor his son. But, it would be good to know where the idea comes from, in any case.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17472 on: July 06, 2017, 01:44:04 AM »

Hi, LTNS


(afterthought) for the TL;DR it's just a hatchet job on how improbable it is that it works at all.

I gathered that the video was a debunk video rather an informative or you know like encouraging that this is a valid device the speaker speaks clearly enough that auto translate to enlish works pretty well.


0:56 a timeline of the viideos.... the video is 1:19 hour long; and you'd think for an hour we'd get to see the device running, but you would be wrong.  The second half of the movie is completely 'singing about the conspiracy charges' then entered the cafe from (0:27 hour to 1:01) but basically it works 10 minutes after a long setup of digging a hole, saturating the ground, etc... during the first 0:00 to 0:12(hours) is just kapandze explaining the 'legend of the device'. 




1:43  there is a car battery 12V which drives a converter DC to AC; and claim is that many times output is present (1kW per bulb) than is avaiable at the input.
2:40(ish) review of if this story is real...
(it might be; but the (circus is not techies) the crowd of investors...)
3:28 - explaining that if they were 1KW at full power, hanging like that would damage the base and the wires they were hanging on.  probably only 60W bulbs.. at full brightness 11 1kw bulbs 'would not survive the retina' :)
but probably only 300W output instead of 10,100


well you get the idea.
-----------
@NickZ,  Re your prepackaged inverter; I would have said 'it's only one pole, wouldn't be very good for the push-pull action on the ferrite core' but someone responded after a day or so about that.




NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17473 on: July 06, 2017, 03:18:26 AM »
   If you read the specs of that TL494 board, you'd see that it has both outputs available for the push pull topology.
   Although the single ended output can be controlled to a maximum  of 100% duty cycle, the dual outputs for the push pull is controlable up to the normal 47% duty cycle. As Itsu had mentioned. Which is the same as the regular TL494 chips like the ones that I'm using can provide. It also, has built in dead time, to assure that both fets are not firing at the same time. So, it looks usable for these applications, as far as I can tell, so far.

  The guy that bought the device from TK did not mention anything about the device not working, but is showing it running, instead. If his video was made in Brazil, chances are that it works there as well. Maybe this can be looked into further, or it might be another dead end.
  If I can find that video again, I'll post a link to it. However, he is not disclosing it's secret workings, either.
  Would you? Highly improbable that anyone would. As TK was told to not do so, it's a secret, still. 
    "So simple, you'll laugh"...

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17474 on: July 06, 2017, 07:09:25 AM »
   If you read the specs of that TL494 board, you'd see that it has both outputs available for the push pull topology.
   Although the single ended output can be controlled to a maximum  of 100% duty cycle, the dual outputs for the push pull is controlable up to the normal 47% duty cycle. As Itsu had mentioned. Which is the same as the regular TL494 chips like the ones that I'm using can provide. It also, has built in dead time, to assure that both fets are not firing at the same time. So, it looks usable for these applications, as far as I can tell, so far.

  The guy that bought the device from TK did not mention anything about the device not working, but is showing it running, instead. If his video was made in Brazil, chances are that it works there as well. Maybe this can be looked into further, or it might be another dead end.
  If I can find that video again, I'll post a link to it. However, he is not disclosing it's secret workings, either.
  Would you? Highly improbable that anyone would. As TK was told to not do so, it's a secret, still. 
    "So simple, you'll laugh"...
Nick Hi,

the 47% duty cycle thing is because with push pull a push is 0 to 47% and a pull is 47%, if they did 100% they would overlap each other. It's as simple as that. In saying that you only need the pulses each going positive for 47% of its own duty cycle to work! but don't get confused ;) Otherwise, the transistors would be on all the time between them and you would have an electric thermal heater with the both the coils and MOS FETs getting red hot and burning out.

AG