Author Topic: Recircing Electricity (Read 8532 times)

johnny874 · « **on:** November 17, 2011, 03:45:41 PM »

Hi All,
I'm going off the fact that ground energy is heat :-)
Have been wondering though why some of the ground energy can't be ran through a phase converter or some such device and put back into the supply side.
Have been working on another project and might slowly move into this.
When I work in electroplating, in the material for certification it mentioned that ground energy could be looped. And did see this when the 2 grounds on a plating tank were both connected on the same side as the primary ground.
Any way, I guess this is my start on it.

Jim

johnny874 · « **Reply #1 on:** November 17, 2011, 06:15:30 PM »

Just did some quick checking and might be possible to build a 3 phase converter for test purposes.
With ground energy, hopefully there would be a way to power a motor with it. If not, then I guess it would be basically if a static converter would work.

Jim

edited to add; think of it as having 2 hydroelectric dams on the same river.
Question, do any of you know if the value, ie., cycle or phase of ground enerhy has been identified or it's potential ?

edited to add; this is a bit beyond my understanding but seems to touch on the subject.
http://en.wikipedia.org/wiki/Ground_loop_(electricity)

edited to add on last thought; would it be possible for a motor to act as a capacitor ? Basically wire it into the system the same way. The motor acts as a ground and source of output. I think some might understand this analogy better.

Fouadtoth · « **Reply #2 on:** November 19, 2011, 08:55:37 AM »

The project idea is unique and the concept is helpful but it's difficult to get success, keep updating your project condition.

Granite Countertops

News:

User Menu

Author Topic: Recircing Electricity (Read 8532 times)

johnny874

Recircing Electricity

johnny874

Re: Recircing Electricity

Fouadtoth

Re: Recircing Electricity